[Tue Jun 19 03:53:39 2012] Detection parameters:
  Position = (247.4, 236.0) = 17 45 52.71 -29 3 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 269.7 +/- 36.6
  Background counts = 565.0
  Rate = 0.004 +/- 0.0005

[Tue Jun 19 03:53:40 2012] Off-axis axis estimate = 5.85'
[Tue Jun 19 04:06:24 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 04:06:24 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Tue Jun 19 04:06:24 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.068
[Tue Jun 19 04:06:24 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 9.35"
[Tue Jun 19 12:57:34 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_src79.ximg exists
[Tue Jun 19 12:57:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_src79.csv
[Tue Jun 19 12:57:34 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_src79_1.ximg exists
[Tue Jun 19 12:57:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_src79.csv
[Tue Jun 19 12:57:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 12:57:36 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Tue Jun 19 12:57:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src79.csv
[Tue Jun 19 12:57:36 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Tue Jun 19 12:57:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src79.csv
[Tue Jun 19 12:57:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:00:42 2012] Warning, spatial fit 79 centroid is now closest to src. 98
[Tue Jun 19 19:00:42 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:00:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:00:42 2012] Assessing source extent using major
[Tue Jun 19 19:00:42 2012] Source does appear to be extended
[Tue Jun 19 19:00:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:00:43 2012] Source is confused with source 23
[Tue Jun 19 19:01:30 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 19:01:30 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Tue Jun 19 19:01:30 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.068
[Tue Jun 19 19:01:30 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 9.35"
[Tue Jun 19 23:13:54 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_src76.ximg exists
[Tue Jun 19 23:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_src76.csv
[Tue Jun 19 23:13:54 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_src76_1.ximg exists
[Tue Jun 19 23:13:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_src76.csv
[Tue Jun 19 23:13:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 23:13:56 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Tue Jun 19 23:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src76.csv
[Tue Jun 19 23:13:56 2012] fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Tue Jun 19 23:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src76.csv
[Tue Jun 19 23:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 04:31:36 2012] Source 95 is offset by -0.009332 and 6.402634 pixels which is larger than
2 X fitted extent = 2.291632 x 2.291632, not incorporating fit results
[Wed Jun 20 04:31:36 2012] Source 95 is offset by 0.754668 and 6.154243 pixels which is larger than
2 X fitted extent = 1.564294 x 1.564294, not incorporating fit results
[Wed Jun 20 04:31:36 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 04:31:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 04:31:36 2012] Assessing source extent using major
[Wed Jun 20 04:31:36 2012] Source does appear to be extended
[Wed Jun 20 04:31:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 04:32:23 2012] XMMSAS src. selection expression = ellipse(21472.270081, 20479.897125, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 20 04:32:23 2012] Writing source region out to fullrun_pn_xmm0202670601_pi300-10000_pass1_cl_src95_src.reg
[Wed Jun 20 04:32:23 2012] Extracting stamp from image fullrun_pn_xmm0202670601_pi300-10000_cl_sm2.00.img.gz, (210, 198) - (285, 273)
[Wed Jun 20 04:32:23 2012] XMMSAS bgd. selection expression = annulus(21472.270081, 20479.897125, 1087.500000, 2175.000000, X, Y) && !ellipse(24825.779560, 24137.352800, 1914.583255, 1914.583255, 0.000000, X, Y) && !ellipse(24352.313110, 22051.969177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.687103, 21441.422623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22093.006638, 20448.445648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21916.113983, 19529.360794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.472504, 18763.678223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23834.822000, 22934.328000, 1323.760038, 1323.760038, 0.000000, X, Y) && !ellipse(23197.168274, 22420.258911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19912.781540, 22312.135498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22180.135406, 21427.575317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20389.817291, 21096.282089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21214.039276, 21096.555557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23149.072418, 20999.504944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20847.670456, 20411.621719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20127.720764, 20393.837006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19984.335907, 18878.599838, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 04:32:23 2012] Writing fullrun_pn_xmm0202670601_pi300-10000_pass1_cl_src95.gif
[Wed Jun 20 06:05:35 2012] Mean detx,y = (3764.24, -3717.14) 
[Wed Jun 20 06:05:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 06:05:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 06:05:59 2012] Setting source spectrum file to fullrun_pn_xmm0202670601_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed Jun 20 06:05:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202670601_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Wed Jun 20 12:46:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 20 12:46:25 2012] rmf not generated due to insufficient counts
[Wed Jun 20 20:36:51 2012] Updating aperture counts using extracted products
[Wed Jun 20 20:36:51 2012] Error reading totcts from fullrun_pn_xmm0202670601_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed Jun 20 20:36:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 20:36:58 2012] Using photon index=1.80, rate=0.00358, arf fullrun_pn_xmm0202670601_pi300-10000_pass1_cl_src95.arf
[Wed Jun 20 20:36:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 20:36:58 2012] Updating source flux to 1.2e-14
[Wed Jun 20 20:56:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting