[Tue Jun 19 03:55:09 2012] Detection parameters:
  Position = (156.9, 390.9) = 17 46 22.66 -28 52 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 634.1 +/- 43.9
  Background counts = 445.8
  Rate = 0.005 +/- 0.0004

[Tue Jun 19 03:55:13 2012] Off-axis axis estimate = 12.26'
[Tue Jun 19 16:20:04 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 16:20:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 16:20:04 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Tue Jun 19 16:20:04 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Tue Jun 19 16:20:04 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.56"
[Tue Jun 19 19:00:21 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jun 19 19:00:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src15.csv
[Tue Jun 19 19:00:21 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jun 19 19:00:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src15.csv
[Tue Jun 19 19:00:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:00:23 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 19 19:00:23 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 19 19:00:23 2012] Fit fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jun 19 19:01:07 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.332893 pixels away
[Tue Jun 19 19:01:07 2012] Source 5 is offset by 0.480465 and -2.676457 pixels which is larger than
2 X fitted extent = 1.439292 x 1.439292, not incorporating fit results
[Tue Jun 19 19:01:07 2012] Source 5 is offset by 0.523775 and 1.971429 pixels which is larger than
2 X fitted extent = 1.551793 x 1.551793, not incorporating fit results
[Tue Jun 19 19:01:07 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:01:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:01:07 2012] Assessing source extent using major
[Tue Jun 19 19:01:07 2012] Source does appear to be extended
[Tue Jun 19 19:01:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 02:06:57 2012] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 02:06:57 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Wed Jun 20 02:06:57 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Wed Jun 20 02:06:57 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.56"
[Wed Jun 20 04:31:15 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jun 20 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src15.csv
[Wed Jun 20 04:31:15 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jun 20 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src15.csv
[Wed Jun 20 04:31:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 04:31:16 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jun 20 04:31:16 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jun 20 04:31:16 2012] Fit fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Jun 20 04:31:57 2012] Spatial fit model total counts = 3278.430000, observed total counts = 3282.000000
[Wed Jun 20 04:31:57 2012] Offset between fit and detection position for source 5 = 0.058580 pixels
[Wed Jun 20 04:31:57 2012] 3241.160000 total counts/ 3016.300000 bgd. counts: snr = 4.094255
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.058580 pixels
  Position = (156.8, 391.0) = 17 46 22.67 -28 52 17.3
  Extent = 4.5 (3.6-5.6)", rotation angle = 0
  Source counts = 224.9 +/- 56.9
  Background counts = 3016.3
  Rate = 0.003 +/- 0.0007
[Wed Jun 20 04:31:57 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 04:31:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 04:31:57 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 04:31:57 2012] Source does appear to be extended
[Wed Jun 20 04:31:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 17:35:47 2012] XMMSAS src. selection expression = ellipse(13593.278200, 33965.560200, 269.167208, 269.167208, 0.000000, X, Y)
[Wed Jun 20 17:35:47 2012] Writing source region out to fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src5_src.reg
[Wed Jun 20 17:35:47 2012] Extracting stamp from image fullrun_mos2_xmm0202670601_pi300-10000_cl_sm2.00.img.gz, (141, 375) - (172, 406)
[Wed Jun 20 17:35:47 2012] XMMSAS bgd. selection expression = annulus(13593.278200, 33965.560200, 448.612013, 897.224026, X, Y) && !ellipse(13827.977432, 33195.241302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13079.961426, 32744.693451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14600.127655, 32720.989349, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 17:35:47 2012] Writing fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src5.gif
[Wed Jun 20 17:58:15 2012] Mean detx,y = (-10773.00, -10202.89) 
[Wed Jun 20 17:58:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 17:58:24 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 17:58:25 2012] Setting source spectrum file to fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 20 17:58:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun 20 20:37:09 2012] Updating aperture counts using extracted products
[Wed Jun 20 20:37:09 2012] Error reading totcts from fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 20 20:37:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 20:37:13 2012] Using photon index=1.80, rate=0.0029, arf fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src5.arf
[Wed Jun 20 20:37:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 20:37:13 2012] Updating source flux to 1e-13
[Wed Jun 20 20:47:31 2012] Flag b found in src. 5 procflags, skipping spectral fitting