[Tue Jun 19 03:55:08 2012] Detection parameters:
  Position = (241.4, 358.4) = 17 45 54.65 -28 54 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4703.5 +/- 153.3
  Background counts = 584.2
  Rate = 0.04 +/- 0.001

[Tue Jun 19 03:55:13 2012] Off-axis axis estimate = 6.00'
[Tue Jun 19 16:20:04 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 16:20:04 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Tue Jun 19 16:20:04 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.703
[Tue Jun 19 16:20:04 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.43"
[Tue Jun 19 19:00:21 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 19 19:00:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src2.csv
[Tue Jun 19 19:00:21 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 19 19:00:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src2.csv
[Tue Jun 19 19:00:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:00:23 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 19 19:00:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 19 19:00:23 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 19 19:00:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 19 19:00:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 19:01:07 2012] Source 3 is offset by -0.518095 and 2.124305 pixels which is larger than
2 X fitted extent = 5.382851 x 1.570009, not incorporating fit results
[Tue Jun 19 19:01:07 2012] Spatial fit model total counts = 7640.870000, observed total counts = 5645.000000
[Tue Jun 19 19:01:07 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 19 19:01:07 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:01:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:01:07 2012] Assessing source extent using major
[Tue Jun 19 19:01:07 2012] Source does appear to be extended
[Tue Jun 19 19:01:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:01:07 2012] Source is confused with source 44
[Wed Jun 20 02:06:57 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 02:06:57 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Wed Jun 20 02:06:57 2012] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.703
[Wed Jun 20 02:06:57 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.43"
[Wed Jun 20 04:31:14 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 20 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src2.csv
[Wed Jun 20 04:31:14 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 20 04:31:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src2.csv
[Wed Jun 20 04:31:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 04:31:15 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 20 04:31:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 20 04:31:15 2012] fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 20 04:31:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 20 04:31:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 04:31:57 2012] Warning, spatial fit 2 centroid is now closest to src. 45
[Wed Jun 20 04:31:57 2012] Spatial fit model total counts = 7367.610000, observed total counts = 6500.000000
[Wed Jun 20 04:31:57 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 20 04:31:57 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 04:31:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 04:31:57 2012] Assessing source extent using major
[Wed Jun 20 04:31:57 2012] Source does appear to be extended
[Wed Jun 20 04:31:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 17:35:46 2012] Counts = 4703.497559, rescaling region sizes by 2.000000
[Wed Jun 20 17:35:46 2012] XMMSAS src. selection expression = ellipse(20956.829330, 31135.862518, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 20 17:35:46 2012] Writing source region out to fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 20 17:35:46 2012] Extracting stamp from image fullrun_mos2_xmm0202670601_pi300-10000_cl_sm2.00.img.gz, (166, 283) - (316, 433)
[Wed Jun 20 17:35:46 2012] XMMSAS bgd. selection expression = annulus(20956.829330, 31135.862518, 4350.000000, 8700.000000, X, Y) && !ellipse(24852.064000, 23708.162000, 1229.328035, 1229.328035, 0.000000, X, Y) && !ellipse(23783.664246, 24818.039764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25995.394400, 23032.619600, 339.759210, 339.759210, 0.000000, X, Y) && !ellipse(24182.571777, 26140.634644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23408.978200, 26531.893000, 357.445610, 357.445610, 0.000000, X, Y) && !ellipse(22114.830978, 37536.654938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20987.862640, 30337.436798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24343.084229, 26807.570038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17617.074615, 24899.440308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.794067, 22130.191650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21673.206680, 32826.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.481537, 23509.126251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13593.278200, 33965.560200, 358.889610, 358.889610, 0.000000, X, Y) && !ellipse(25843.138400, 28758.329400, 376.294411, 376.294411, 0.000000, X, Y) && !ellipse(25127.233856, 23009.200165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13827.977432, 33195.241302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24438.885651, 22753.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26696.488000, 25500.026000, 2970.928085, 2970.928085, 0.000000, X, Y) && !ellipse(21910.043259, 31308.181885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.883270, 25610.982849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20893.980804, 31545.634430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19406.922791, 28676.469055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26176.063354, 25184.335571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15922.434000, 21908.951600, 1262.704036, 346.939210, 26.457000, X, Y) && !ellipse(13079.961426, 32744.693451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21923.244000, 21409.837800, 1413.072041, 1413.072041, 0.000000, X, Y) && !ellipse(26605.617889, 24838.369324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14600.127655, 32720.989349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21941.981000, 27833.982000, 1336.088038, 1336.088038, 0.000000, X, Y) && !ellipse(23905.888519, 22927.552704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27758.788000, 24671.160000, 1556.904045, 1437.024041, 90.000000, X, Y) && !ellipse(26500.938000, 21763.436000, 1268.128036, 1268.128036, 0.000000, X, Y) && !ellipse(27005.076400, 39998.924800, 506.419215, 506.419215, 0.000000, X, Y) && !ellipse(27230.122000, 23967.500000, 1196.264034, 1196.264034, 0.000000, X, Y) && !ellipse(27223.034000, 25831.971600, 1129.552033, 1129.552033, 0.000000, X, Y) && !ellipse(20818.147200, 29059.138000, 673.880019, 673.880019, 0.000000, X, Y) && !ellipse(28024.862600, 33088.990200, 632.781618, 632.781618, 0.000000, X, Y) && !ellipse(21516.286000, 28570.518000, 2671.376077, 2671.376077, 0.000000, X, Y) && !ellipse(21712.639175, 30236.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12475.157700, 32062.733246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24818.445984, 22279.993713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13151.983078, 32069.633667, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 17:35:46 2012] Writing fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src3.gif
[Wed Jun 20 17:41:33 2012] Mean detx,y = (-3519.68, -6932.92) 
[Wed Jun 20 17:41:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 17:43:20 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 17:43:21 2012] Setting source spectrum file to fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 17:43:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 20 19:02:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 20 19:02:28 2012] rmf not generated due to insufficient counts
[Wed Jun 20 20:37:08 2012] Updating aperture counts using extracted products
[Wed Jun 20 20:37:08 2012] Error reading totcts from fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 20:37:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 20:37:12 2012] Using photon index=1.80, rate=0.0383, arf fullrun_mos2_xmm0202670601_pi300-10000_pass1_cl_src3.arf
[Wed Jun 20 20:37:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 20:37:12 2012] Updating source flux to 5.4e-13
[Wed Jun 20 20:47:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting