[Tue Jun 19 03:54:27 2012] Detection parameters:
  Position = (308.4, 267.3) = 17 45 32.45 -29 1 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.3 +/- 33.8
  Background counts = 510.5
  Rate = 0.001 +/- 0.0003

[Tue Jun 19 03:54:28 2012] Off-axis axis estimate = 2.37'
[Tue Jun 19 12:57:37 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 12:57:37 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Tue Jun 19 12:57:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.234
[Tue Jun 19 12:57:37 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 7.61"
[Tue Jun 19 16:20:02 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src67.ximg exists
[Tue Jun 19 16:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src67.csv
[Tue Jun 19 16:20:02 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src67_1.ximg exists
[Tue Jun 19 16:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src67.csv
[Tue Jun 19 16:20:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 16:20:04 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Tue Jun 19 16:20:04 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Tue Jun 19 16:20:04 2012] Fit fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Tue Jun 19 19:00:54 2012] Source 59 is offset by 2.415382 and 8.306389 pixels which is larger than
2 X fitted extent = 7.019311 x 7.019311, not incorporating fit results
[Tue Jun 19 19:00:54 2012] Source 59 is offset by 7.436508 and 1.855194 pixels which is larger than
2 X fitted extent = 2.613389 x 2.613389, not incorporating fit results
[Tue Jun 19 19:00:55 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:00:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:00:55 2012] Assessing source extent using major
[Tue Jun 19 19:00:55 2012] Source does appear to be extended
[Tue Jun 19 19:00:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 19:00:55 2012] Source is confused with source 58
[Tue Jun 19 23:13:56 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:13:56 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Tue Jun 19 23:13:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.234
[Tue Jun 19 23:13:56 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 7.61"
[Wed Jun 20 02:06:55 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src58.ximg exists
[Wed Jun 20 02:06:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src58.csv
[Wed Jun 20 02:06:55 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src58_1.ximg exists
[Wed Jun 20 02:06:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src58.csv
[Wed Jun 20 02:06:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 02:06:56 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Wed Jun 20 02:06:56 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Wed Jun 20 02:06:56 2012] Fit fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Wed Jun 20 04:31:49 2012] Spatial fit model total counts = 4237.310000, observed total counts = 4151.000000
[Wed Jun 20 04:31:49 2012] Offset between fit and detection position for source 59 = 7.161578 pixels
[Wed Jun 20 04:31:49 2012] 4066.124000 total counts/ 3690.570000 bgd. counts: snr = 6.181953
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 7.161578 pixels
  Position = (314.5, 271.1) = 17 45 30.45 -29 0 59.1
  Extent = 15.2 (14.8-30.5)", rotation angle = 0
  Source counts = 375.6 +/- 63.8
  Background counts = 3690.6
  Rate = 0.005 +/- 0.0008
[Wed Jun 20 04:31:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 04:31:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 04:31:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 04:31:49 2012] Source does appear to be extended
[Wed Jun 20 04:31:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 12:48:31 2012] XMMSAS src. selection expression = ellipse(27311.918000, 23538.482000, 913.740026, 913.740026, 0.000000, X, Y)
[Wed Jun 20 12:48:31 2012] Writing source region out to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src59_src.reg
[Wed Jun 20 12:48:31 2012] Extracting stamp from image fullrun_mos1_xmm0202670601_pi300-10000_cl_sm2.00.img.gz, (262, 219) - (367, 324)
[Wed Jun 20 12:48:31 2012] XMMSAS bgd. selection expression = annulus(27311.918000, 23538.482000, 1522.900044, 3045.800088, X, Y) && !ellipse(24820.493000, 24140.435200, 621.708018, 621.708018, 0.000000, X, Y) && !ellipse(23282.732000, 24925.888000, 1065.872031, 1065.872031, 0.000000, X, Y) && !ellipse(25993.258600, 23035.365400, 391.458411, 317.528809, 149.966300, X, Y) && !ellipse(23357.695420, 26022.303800, 970.024028, 970.024028, 0.000000, X, Y) && !ellipse(24433.520200, 26812.503200, 377.672811, 377.672811, 0.000000, X, Y) && !ellipse(26695.744000, 25528.970000, 1112.400032, 1112.400032, 0.000000, X, Y) && !ellipse(25393.164246, 22842.020935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.702179, 26142.440063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23877.049591, 22819.880646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.976000, 24998.976000, 1061.048031, 1061.048031, 0.000000, X, Y) && !ellipse(27070.514000, 25828.190000, 2224.800064, 2224.800064, 0.000000, X, Y) && !ellipse(26375.819794, 24653.666901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26556.566223, 23631.143433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25183.350600, 22338.012000, 1236.408036, 418.615212, 0.039000, X, Y) && !ellipse(27666.316400, 24454.317000, 940.536027, 940.536027, 0.000000, X, Y) && !ellipse(26515.392029, 24230.492401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27832.484000, 26682.584000, 1125.968032, 1125.968032, 0.000000, X, Y) && !ellipse(21966.884000, 27995.892000, 2651.880076, 2651.880076, 0.000000, X, Y) && !ellipse(25807.586000, 25812.542000, 2122.096061, 1906.336055, 38.535000, X, Y) && !ellipse(27007.220000, 24114.184000, 1186.744034, 1186.744034, 0.000000, X, Y) && !ellipse(24213.554000, 21885.742000, 1289.360037, 1289.360037, 0.000000, X, Y) && !ellipse(26179.536600, 27104.336200, 1110.240032, 507.943215, 347.803496, X, Y) && !ellipse(26242.101898, 25957.915527, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 12:48:31 2012] Writing fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src59.gif
[Wed Jun 20 13:57:22 2012] Mean detx,y = (990.20, -2564.03) 
[Wed Jun 20 13:57:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 13:57:38 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 13:57:38 2012] Setting source spectrum file to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed Jun 20 13:57:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Wed Jun 20 20:37:02 2012] Updating aperture counts using extracted products
[Wed Jun 20 20:37:02 2012] Error reading totcts from fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed Jun 20 20:37:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 20:37:07 2012] Using photon index=1.80, rate=0.00491, arf fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src59.arf
[Wed Jun 20 20:37:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 20:37:07 2012] Updating source flux to 5e-14
[Wed Jun 20 20:37:18 2012] Flag b found in src. 59 procflags, skipping spectral fitting
[Wed Jun 20 20:37:18 2012] Flag c found in src. 59 procflags, skipping spectral fitting