[Tue Jun 19 03:54:23 2012] Detection parameters:
  Position = (276.0, 282.0) = 17 45 43.22 -29 0 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4091.0 +/- 92.6
  Background counts = 614.2
  Rate = 0.03 +/- 0.0008

[Tue Jun 19 03:54:28 2012] Off-axis axis estimate = 2.02'
[Tue Jun 19 12:57:37 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 12:57:37 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Jun 19 12:57:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Tue Jun 19 12:57:37 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.44"
[Tue Jun 19 16:20:01 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jun 19 16:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src4.csv
[Tue Jun 19 16:20:01 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jun 19 16:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src4.csv
[Tue Jun 19 16:20:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 16:20:03 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun 19 16:20:03 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun 19 16:20:03 2012] Fit fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jun 19 19:00:54 2012] Spatial fit model total counts = 18479.900000, observed total counts = 18486.000000
[Tue Jun 19 19:00:54 2012] Offset between fit and detection position for source 3 = 5.038540 pixels
[Tue Jun 19 19:00:54 2012] 18529.870000 total counts/ 14520.600000 bgd. counts: snr = 33.271549
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.038540 pixels
  Position = (272.3, 285.4) = 17 45 44.43 -28 59 56.8
  Extent = 14.9 (14.8-29.8)", rotation angle = 0
  Source counts = 4009.3 +/- 136.1
  Background counts = 14520.6
  Rate = 0.05 +/- 0.002
[Tue Jun 19 19:00:54 2012] Spatial fit model total counts = 5305.260000, observed total counts = 5292.000000
[Tue Jun 19 19:00:54 2012] Offset between fit and detection position for source 3 = 4.433659 pixels
[Tue Jun 19 19:00:54 2012] Warning, changing simple spatial fit ID from 4 to 21
[Tue Jun 19 19:00:54 2012] 5377.810000 total counts/ 5005.620000 bgd. counts: snr = 5.260606
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.433659 pixels
  Position = (268.2, 287.1) = 17 45 45.80 -28 59 49.8
  Extent = 13.3 (8.8-15.6)", rotation angle = 0
  Source counts = 372.2 +/- 73.3
  Background counts = 5005.6
  Rate = 0.005 +/- 0.001
[Tue Jun 19 19:00:55 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:00:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:00:55 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 19:00:55 2012] Source does appear to be extended
[Tue Jun 19 19:00:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:13:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:13:56 2012] Initial guess for spatial extent in simple fitting = 13.32"
[Tue Jun 19 23:13:56 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.103
[Tue Jun 19 23:13:56 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.32"
[Wed Jun 20 02:06:54 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 20 02:06:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src4.csv
[Wed Jun 20 02:06:54 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 20 02:06:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src4.csv
[Wed Jun 20 02:06:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 02:06:55 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 20 02:06:55 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 20 02:06:55 2012] Fit fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jun 20 04:31:49 2012] Warning, spatial fit 4 centroid is now closest to src. 15
[Wed Jun 20 04:31:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 04:31:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 04:31:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 04:31:49 2012] Source does appear to be extended
[Wed Jun 20 04:31:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 12:48:29 2012] XMMSAS src. selection expression = ellipse(23282.732000, 24925.888000, 799.404023, 799.404023, 0.000000, X, Y)
[Wed Jun 20 12:48:29 2012] Writing source region out to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 20 12:48:29 2012] Extracting stamp from image fullrun_mos1_xmm0202670601_pi300-10000_cl_sm2.00.img.gz, (222, 241) - (314, 333)
[Wed Jun 20 12:48:29 2012] XMMSAS bgd. selection expression = annulus(23282.732000, 24925.888000, 1332.340038, 2664.680077, X, Y) && !ellipse(24820.493000, 24140.435200, 621.708018, 621.708018, 0.000000, X, Y) && !ellipse(25993.258600, 23035.365400, 391.458411, 317.528809, 149.966300, X, Y) && !ellipse(23410.076000, 26536.559600, 417.807212, 417.807212, 0.000000, X, Y) && !ellipse(23357.695420, 26022.303800, 970.024028, 970.024028, 0.000000, X, Y) && !ellipse(19306.838000, 21808.342000, 1554.816045, 1554.816045, 0.000000, X, Y) && !ellipse(24433.520200, 26812.503200, 377.672811, 377.672811, 0.000000, X, Y) && !ellipse(26695.744000, 25528.970000, 1112.400032, 1112.400032, 0.000000, X, Y) && !ellipse(25393.164246, 22842.020935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24390.702179, 26142.440063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23877.049591, 22819.880646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.976000, 24998.976000, 1061.048031, 1061.048031, 0.000000, X, Y) && !ellipse(27070.514000, 25828.190000, 2224.800064, 2224.800064, 0.000000, X, Y) && !ellipse(26375.819794, 24653.666901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21692.070940, 28558.496000, 1324.416038, 1324.416038, 0.000000, X, Y) && !ellipse(26556.566223, 23631.143433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25183.350600, 22338.012000, 1236.408036, 418.615212, 0.039000, X, Y) && !ellipse(21688.780000, 21768.310800, 1191.360034, 1191.360034, 0.000000, X, Y) && !ellipse(26515.392029, 24230.492401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21966.884000, 27995.892000, 2651.880076, 2651.880076, 0.000000, X, Y) && !ellipse(25807.586000, 25812.542000, 2122.096061, 1906.336055, 38.535000, X, Y) && !ellipse(27007.220000, 24114.184000, 1186.744034, 1186.744034, 0.000000, X, Y) && !ellipse(24213.554000, 21885.742000, 1289.360037, 1289.360037, 0.000000, X, Y) && !ellipse(26179.536600, 27104.336200, 1110.240032, 507.943215, 347.803496, X, Y) && !ellipse(26242.101898, 25957.915527, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 12:48:29 2012] Writing fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src3.gif
[Wed Jun 20 12:53:26 2012] Mean detx,y = (-458.63, 1171.68) 
[Wed Jun 20 12:53:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 12:53:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 12:53:45 2012] Setting source spectrum file to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 12:53:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 20 20:36:58 2012] Updating aperture counts using extracted products
[Wed Jun 20 20:36:58 2012] Error reading totcts from fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 20:37:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 20:37:03 2012] Using photon index=1.80, rate=0.00487, arf fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src3.arf
[Wed Jun 20 20:37:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 20:37:03 2012] Updating source flux to 4.7e-14