[Tue Jun 19 03:54:24 2012] Detection parameters:
  Position = (254.2, 432.0) = 17 45 50.42 -28 49 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1244.8 +/- 51.8
  Background counts = 306.7
  Rate = 0.01 +/- 0.0004

[Tue Jun 19 03:54:28 2012] Off-axis axis estimate = 10.20'
[Tue Jun 19 12:57:37 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Tue Jun 19 12:57:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 19 12:57:37 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Tue Jun 19 12:57:37 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.907
[Tue Jun 19 12:57:37 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.53"
[Tue Jun 19 16:20:01 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jun 19 16:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src9.csv
[Tue Jun 19 16:20:01 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jun 19 16:20:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src9.csv
[Tue Jun 19 16:20:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 19 16:20:03 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jun 19 16:20:03 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jun 19 16:20:03 2012] Fit fullrun_mos1_xmm0202670601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Jun 19 19:00:54 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.146524 pixels away
[Tue Jun 19 19:00:54 2012] Spatial fit model total counts = 2135.500000, observed total counts = 2137.000000
[Tue Jun 19 19:00:54 2012] Offset between fit and detection position for source 21 = 1.123753 pixels
[Tue Jun 19 19:00:54 2012] Warning, changing simple spatial fit ID from 9 to 74
[Tue Jun 19 19:00:54 2012] 2164.510000 total counts/ 1835.130000 bgd. counts: snr = 7.688893
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 1.123753 pixels
  Position = (253.2, 431.5) = 17 45 50.76 -28 49 21.5
  Extent = 7.9 (6.8-9.7)", rotation angle = 0
  Source counts = 329.4 +/- 46.5
  Background counts = 1835.1
  Rate = 0.004 +/- 0.0006
[Tue Jun 19 19:00:55 2012] Vigneting correction estimate = 1.000000
[Tue Jun 19 19:00:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 19 19:00:55 2012] Assessing source extent using major axis lower bound
[Tue Jun 19 19:00:55 2012] Source does appear to be extended
[Tue Jun 19 19:00:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 23:13:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 19 23:13:56 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Jun 19 23:13:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Tue Jun 19 23:13:56 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.95"
[Wed Jun 20 02:06:54 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 20 02:06:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src9.csv
[Wed Jun 20 02:06:54 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 20 02:06:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src9.csv
[Wed Jun 20 02:06:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 02:06:55 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 20 02:06:55 2012] fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 20 02:06:55 2012] Fit fullrun_mos1_xmm0202670601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jun 20 04:31:49 2012] Warning, spatial fit 9 centroid is now closest to src. 22
[Wed Jun 20 04:31:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 04:31:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 04:31:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 04:31:49 2012] Source does appear to be extended
[Wed Jun 20 04:31:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 12:48:29 2012] XMMSAS src. selection expression = ellipse(21976.870000, 37491.164000, 476.800214, 476.800214, 0.000000, X, Y)
[Wed Jun 20 12:48:29 2012] Writing source region out to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src21_src.reg
[Wed Jun 20 12:48:29 2012] Extracting stamp from image fullrun_mos1_xmm0202670601_pi300-10000_cl_sm2.00.img.gz, (226, 404) - (281, 459)
[Wed Jun 20 12:48:29 2012] XMMSAS bgd. selection expression = annulus(21976.870000, 37491.164000, 794.667023, 1589.334046, X, Y) && !ellipse(21405.417770, 37119.058655, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 12:48:29 2012] Writing fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src21.gif
[Wed Jun 20 12:57:54 2012] Mean detx,y = (-13176.97, 1979.15) 
[Wed Jun 20 12:57:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 12:58:10 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 12:58:10 2012] Setting source spectrum file to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jun 20 12:58:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jun 20 20:36:59 2012] Updating aperture counts using extracted products
[Wed Jun 20 20:36:59 2012] Error reading totcts from fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jun 20 20:37:04 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 20:37:04 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos1_xmm0202670601_pi300-10000_pass1_cl_src21.arf
[Wed Jun 20 20:37:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 20:37:04 2012] Updating source flux to 9.7e-14