[Fri May 10 02:53:40 2013] Detection parameters:
  Position = (412.0, 441.9) = 15 1 41.67 -41 52 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 540.3 +/- 41.3
  Background counts = 284.2
  Rate = 0.01 +/- 0.001

[Fri May 10 02:53:48 2013] Off-axis axis estimate = 13.27'
[Fri May 10 03:08:20 2013] Using EEF radius (= 13.06 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:08:20 2013] Initial guess for spatial extent in simple fitting = 13.06"
[Fri May 10 03:08:20 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Fri May 10 03:08:20 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 13.06"
[Fri May 10 10:56:20 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass0_src91.ximg exists
[Fri May 10 10:56:20 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass0_src91_1.ximg exists
[Fri May 10 10:56:20 2013] Fit fullrun_pn_xmm0202590101_pi300-10000_cl_pass0_src91 appears to have run properly
[Fri May 10 10:56:22 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Fri May 10 10:56:22 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Fri May 10 10:56:22 2013] Fit fullrun_pn_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Fri May 10 21:17:23 2013] Spatial fit model total counts = 5511.310000, observed total counts = 5504.000000
[Fri May 10 21:17:23 2013] Offset between fit and detection position for source 96 = 2.017929 pixels
[Fri May 10 21:17:23 2013] Warning, changing simple spatial fit ID from 91 to 84
[Fri May 10 21:17:23 2013] 5088.313000 total counts/ 4152.490000 bgd. counts: snr = 14.522434
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 2.017929 pixels
  Position = (412.3, 439.9) = 15 1 41.54 -41 52 56.2
  Extent = 26.2 (26.1-52.4)" x 12.7 (10.5-16.3)", rotation angle = 31 (24-39) degrees
  Source counts = 935.8 +/- 71.3
  Background counts = 4152.5
  Rate = 0.02 +/- 0.002
[Fri May 10 21:17:23 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:23 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:17:23 2013] Source does appear to be extended
[Fri May 10 21:17:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.61
[Fri May 10 21:17:23 2013] Source is asymmetric
[Fri May 10 21:17:24 2013] Source is confused with source 82
[Fri May 10 21:18:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 21:18:49 2013] Initial guess for spatial extent in simple fitting = 19.46"
[Fri May 10 21:18:49 2013] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.010
[Fri May 10 21:18:49 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 19.46"
[Sat May 11 04:39:34 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_src78.ximg exists
[Sat May 11 04:39:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_src78.csv
[Sat May 11 04:39:34 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_src78_1.ximg exists
[Sat May 11 04:39:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_src78.csv
[Sat May 11 04:39:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 04:39:36 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Sat May 11 04:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Sat May 11 04:39:36 2013] fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Sat May 11 04:39:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Sat May 11 04:39:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:31 2013] Warning, spatial fit 78 centroid is now closest to src. 107
[Sat May 11 20:26:31 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:26:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:26:31 2013] Assessing source extent using major axis lower bound
[Sat May 11 20:26:31 2013] Source does appear to be extended
[Sat May 11 20:26:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.61
[Sat May 11 20:26:31 2013] Source is asymmetric
[Sat May 11 20:28:35 2013] XMMSAS src. selection expression = ellipse(35820.822000, 38225.480000, 1573.266045, 762.276022, 31.408000, X, Y)
[Sat May 11 20:28:35 2013] Writing source region out to fullrun_pn_xmm0202590101_pi300-10000_pass1_cl_src96_src.reg
[Sat May 11 20:28:35 2013] Extracting stamp from image fullrun_pn_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (322, 350) - (503, 530)
[Sat May 11 20:28:35 2013] XMMSAS bgd. selection expression = annulus(35820.822000, 38225.480000, 2622.110075, 5244.220151, X, Y) && !ellipse(38166.726800, 31702.924400, 1939.416056, 914.816026, 105.105500, X, Y) && !ellipse(38077.295898, 35096.948517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38064.117020, 33575.759600, 3548.536102, 1614.664046, 81.946180, X, Y) && !ellipse(37940.212840, 33943.976000, 1967.848057, 1967.848057, 0.000000, X, Y) && !ellipse(37914.638800, 35796.808000, 2835.504082, 828.672024, 78.189900, X, Y) && !ellipse(30948.473206, 40155.554596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32686.394000, 40248.868000, 3804.296109, 1839.216053, 202.599000, X, Y) && !ellipse(30526.331512, 40125.504974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33218.364000, 39763.466000, 2043.888059, 1760.408051, 69.136000, X, Y) && !ellipse(35097.654755, 39012.256500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36079.147200, 38121.672000, 2037.240059, 2037.240059, 0.000000, X, Y) && !ellipse(37385.862000, 37518.452000, 2124.288061, 1023.528029, 71.945800, X, Y) && !ellipse(34132.570190, 37091.462280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33255.222000, 35790.030000, 1901.240055, 1901.240055, 0.000000, X, Y) && !ellipse(37874.178960, 36090.608000, 2086.240060, 749.261622, 76.999200, X, Y) && !ellipse(36211.519196, 36292.343597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30278.601349, 35967.439697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37218.318000, 35751.656000, 2008.704058, 2008.704058, 0.000000, X, Y) && !ellipse(35655.465790, 35297.435089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36763.154633, 34844.707458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35908.266000, 35638.140000, 1965.240057, 1965.240057, 0.000000, X, Y) && !ellipse(32634.402000, 34446.312000, 3802.480109, 1784.472051, 26.138600, X, Y) && !ellipse(33729.316376, 33961.750916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33338.525269, 33279.719025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34855.234650, 33287.936340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39396.683502, 32986.433868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33876.370483, 33179.895233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33435.006378, 32678.782349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32794.639862, 32749.021149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39140.900635, 32484.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33973.398529, 32485.464355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31345.544000, 40630.584000, 1543.112044, 1543.112044, 0.000000, X, Y)
[Sat May 11 20:28:35 2013] Writing fullrun_pn_xmm0202590101_pi300-10000_pass1_cl_src96.gif