[Fri May 10 02:57:58 2013] Detection parameters:
  Position = (298.2, 247.9) = 15 2 25.97 -42 6 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 581.9 +/- 39.6
  Background counts = 273.4
  Rate = 0.02 +/- 0.001

[Fri May 10 02:58:06 2013] Off-axis axis estimate = 3.66'
[Fri May 10 16:22:07 2013] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Fri May 10 16:22:07 2013] Initial guess for spatial extent in simple fitting = 8.26"
[Fri May 10 16:22:07 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Fri May 10 16:22:07 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 8.26"
[Fri May 10 21:17:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src52.ximg exists
[Fri May 10 21:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src52.csv
[Fri May 10 21:17:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri May 10 21:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src52.csv
[Fri May 10 21:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:02 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri May 10 21:17:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri May 10 21:17:02 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri May 10 21:17:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri May 10 21:17:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:51 2013] Spatial fit model total counts = 5445.900000, observed total counts = 4903.000000
[Fri May 10 21:17:51 2013] Poor agreement between spatial fit and data for source 85
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:17:51 2013] Spatial fit model total counts = 5423.880000, observed total counts = 4777.000000
[Fri May 10 21:17:51 2013] Poor agreement between spatial fit and data for source 85
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:17:52 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:52 2013] Assessing source extent using major
[Fri May 10 21:17:52 2013] Source does appear to be extended
[Fri May 10 21:17:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 13:09:53 2013] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Sat May 11 13:09:53 2013] Initial guess for spatial extent in simple fitting = 8.26"
[Sat May 11 13:09:53 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Sat May 11 13:09:53 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 8.26"
[Sat May 11 20:25:57 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src51.ximg exists
[Sat May 11 20:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src51.csv
[Sat May 11 20:25:57 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat May 11 20:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src51.csv
[Sat May 11 20:25:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:00 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat May 11 20:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat May 11 20:26:00 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat May 11 20:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat May 11 20:26:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:27:17 2013] Spatial fit model total counts = 5443.940000, observed total counts = 4903.000000
[Sat May 11 20:27:17 2013] Poor agreement between spatial fit and data for source 85
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 20:27:17 2013] Spatial fit model total counts = 5429.680000, observed total counts = 4777.000000
[Sat May 11 20:27:17 2013] Poor agreement between spatial fit and data for source 85
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 20:27:18 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:27:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:27:18 2013] Assessing source extent using major
[Sat May 11 20:27:18 2013] Source does appear to be extended
[Sat May 11 20:27:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 20:37:56 2013] XMMSAS src. selection expression = ellipse(25896.332123, 21521.471756, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 20:37:56 2013] Writing source region out to fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src85_src.reg
[Sat May 11 20:37:56 2013] Extracting stamp from image fullrun_mos2_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (261, 210) - (336, 285)
[Sat May 11 20:37:56 2013] XMMSAS bgd. selection expression = annulus(25896.332123, 21521.471756, 1087.500000, 2175.000000, X, Y) && !ellipse(28750.337600, 19423.580200, 1499.104043, 659.873619, 334.799900, X, Y) && !ellipse(27644.422000, 19126.796000, 1502.376043, 815.568023, 323.433500, X, Y) && !ellipse(29521.948600, 19808.501000, 2179.288063, 726.654421, 324.455000, X, Y) && !ellipse(26569.456390, 18583.523865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.469666, 18921.523697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26397.909637, 19363.278091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27504.650635, 19791.005966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28743.726257, 20046.163574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28871.916800, 20889.122200, 1427.784041, 517.119215, 51.316100, X, Y) && !ellipse(25631.028320, 18996.173828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24747.992126, 18478.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30756.826000, 22640.120000, 2864.368082, 1585.120046, 118.222000, X, Y) && !ellipse(28822.501400, 22178.136000, 947.568027, 947.568027, 0.000000, X, Y) && !ellipse(24770.538635, 22216.865082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25278.695312, 22582.866180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24065.375000, 19521.826000, 1095.504032, 1095.504032, 0.000000, X, Y) && !ellipse(23736.434000, 17850.698000, 1556.632045, 1556.632045, 0.000000, X, Y) && !ellipse(27691.376190, 22322.798096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23360.255800, 19405.197600, 1496.832043, 499.778414, 18.467000, X, Y) && !ellipse(25952.454132, 20746.561630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.757111, 20558.245712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28896.940000, 23670.293600, 1280.632037, 779.852022, 142.726478, X, Y) && !ellipse(23939.043400, 20521.058000, 1107.112032, 1107.112032, 0.000000, X, Y) && !ellipse(24396.535278, 20304.476685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23365.759979, 22925.386200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.595642, 23272.502075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23084.653442, 20729.606613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25661.646118, 23429.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23036.464661, 20305.267883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22877.115112, 23888.360016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26125.944366, 23861.910614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.374359, 24507.754456, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:56 2013] Writing fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src85.gif