[Fri May 10 02:57:55 2013] Detection parameters:
  Position = (320.0, 221.0) = 15 2 17.45 -42 8 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2004.1 +/- 57.0
  Background counts = 82.3
  Rate = 0.06 +/- 0.002

[Fri May 10 02:58:06 2013] Off-axis axis estimate = 5.83'
[Fri May 10 16:22:07 2013] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri May 10 16:22:07 2013] Initial guess for spatial extent in simple fitting = 9.34"
[Fri May 10 16:22:07 2013] source mask rpix=2.1, npix_max = 28, mask sum = 35, frac = 1.248
[Fri May 10 16:22:07 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.34"
[Fri May 10 21:17:00 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 10 21:17:00 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 10 21:17:00 2013] Fit fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri May 10 21:17:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 10 21:17:02 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 10 21:17:02 2013] Fit fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri May 10 21:17:51 2013] Spatial fit model total counts = 8841.480000, observed total counts = 8881.000000
[Fri May 10 21:17:51 2013] Offset between fit and detection position for source 6 = 2.448723 pixels
[Fri May 10 21:17:51 2013] 8701.090000 total counts/ 5949.580000 bgd. counts: snr = 35.672040
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.448723 pixels
  Position = (322.4, 221.3) = 15 2 16.50 -42 8 47.9
  Extent = 18.7 (16.4-37.4)" x 13.1 (11.6-14.3)", rotation angle = 339 (328-348) degrees
  Source counts = 2751.5 +/- 93.3
  Background counts = 5949.6
  Rate = 0.06 +/- 0.002
[Fri May 10 21:17:52 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:52 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:17:52 2013] Source does appear to be extended
[Fri May 10 21:17:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Fri May 10 21:17:52 2013] Source is confused with source 5
[Sat May 11 13:09:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 13:09:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 11 13:09:53 2013] Initial guess for spatial extent in simple fitting = 15.91"
[Sat May 11 13:09:53 2013] source mask rpix=3.7, npix_max = 69, mask sum = 70, frac = 1.012
[Sat May 11 13:09:53 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 15.91"
[Sat May 11 20:25:56 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 11 20:25:56 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 11 20:25:56 2013] Fit fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sat May 11 20:25:58 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 11 20:25:58 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 11 20:25:58 2013] Fit fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 11 20:27:17 2013] Warning, spatial fit 2 centroid is now closest to src. 88
[Sat May 11 20:27:17 2013] Spatial fit model total counts = 8207.180000, observed total counts = 8196.000000
[Sat May 11 20:27:17 2013] Offset between fit and detection position for source 6 = 4.218621 pixels
[Sat May 11 20:27:17 2013] Warning, changing simple spatial fit ID from 2 to 9
[Sat May 11 20:27:17 2013] 7671.730000 total counts/ 5948.960000 bgd. counts: snr = 22.336071
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.218621 pixels
  Position = (318.3, 220.4) = 15 2 18.12 -42 8 51.6
  Extent = 18.8 (18.3-37.6)" x 10.2 (9.1-11.5)", rotation angle = 323 (317-329) degrees
  Source counts = 1722.8 +/- 87.6
  Background counts = 5949.0
  Rate = 0.04 +/- 0.002
[Sat May 11 20:27:17 2013] Source 6 is offset by -2.726897 and -1.434230 pixels which is larger than
2 X fitted extent = 6.430529 x 1.041949, not incorporating fit results
[Sat May 11 20:27:18 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:27:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:27:18 2013] Assessing source extent using major axis lower bound
[Sat May 11 20:27:18 2013] Source does appear to be extended
[Sat May 11 20:27:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59
[Sat May 11 20:27:18 2013] Source is asymmetric
[Sat May 11 20:37:49 2013] Counts = 1722.770000, rescaling region sizes by 2.000000
[Sat May 11 20:37:49 2013] XMMSAS src. selection expression = ellipse(27644.422000, 19126.796000, 2253.564065, 1223.352035, 323.433500, X, Y)
[Sat May 11 20:37:49 2013] Writing source region out to fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src6_src.reg
[Sat May 11 20:37:49 2013] Extracting stamp from image fullrun_mos2_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (189, 91) - (448, 350)
[Sat May 11 20:37:50 2013] XMMSAS bgd. selection expression = annulus(27644.422000, 19126.796000, 7511.880216, 15023.760432, X, Y) && !ellipse(28750.337600, 19423.580200, 1499.104043, 659.873619, 334.799900, X, Y) && !ellipse(33177.571600, 22717.392000, 1067.144031, 333.223210, 341.741600, X, Y) && !ellipse(25783.506653, 18219.008255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29545.559520, 20871.593200, 1030.440030, 460.065613, 355.822580, X, Y) && !ellipse(29521.948600, 19808.501000, 2179.288063, 726.654421, 324.455000, X, Y) && !ellipse(31785.686000, 21465.234000, 1508.128043, 1290.248037, 312.511000, X, Y) && !ellipse(26569.456390, 18583.523865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.469666, 18921.523697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34253.658000, 23878.910000, 2227.696064, 820.408024, 304.416000, X, Y) && !ellipse(26397.909637, 19363.278091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27504.650635, 19791.005966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28743.726257, 20046.163574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33206.628000, 22625.540000, 1582.072046, 702.749620, 138.430600, X, Y) && !ellipse(24118.944000, 18287.796000, 1050.608030, 382.054411, 27.888700, X, Y) && !ellipse(30440.602000, 21572.856000, 1455.576042, 898.688026, 100.565900, X, Y) && !ellipse(34752.394745, 24832.947754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28871.916800, 20889.122200, 1427.784041, 517.119215, 51.316100, X, Y) && !ellipse(33814.590607, 23358.931244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.028320, 18996.173828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31176.471191, 21009.787872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22933.675020, 17041.190000, 542.728816, 542.728816, 0.000000, X, Y) && !ellipse(23238.598000, 17511.954000, 1591.800046, 1591.800046, 0.000000, X, Y) && !ellipse(24747.992126, 18478.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30756.826000, 22640.120000, 2864.368082, 1585.120046, 118.222000, X, Y) && !ellipse(16935.405136, 30304.607361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28822.501400, 22178.136000, 947.568027, 947.568027, 0.000000, X, Y) && !ellipse(15424.942000, 17481.626600, 1472.688042, 830.904024, 12.190000, X, Y) && !ellipse(30460.686000, 22113.110000, 1432.184041, 1432.184041, 0.000000, X, Y) && !ellipse(24770.538635, 22216.865082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34961.268400, 26370.160000, 1628.816047, 1628.816047, 0.000000, X, Y) && !ellipse(21134.190000, 18150.802000, 1581.432046, 1581.432046, 0.000000, X, Y) && !ellipse(25278.695312, 22582.866180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.168600, 17257.982000, 1652.784048, 1652.784048, 0.000000, X, Y) && !ellipse(34622.204000, 25268.568000, 3257.632094, 1867.136054, 292.342900, X, Y) && !ellipse(24065.375000, 19521.826000, 1095.504032, 1095.504032, 0.000000, X, Y) && !ellipse(17871.950600, 19547.691400, 1202.784035, 492.655214, -0.000000, X, Y) && !ellipse(22660.329315, 17692.284958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17617.478000, 18268.984000, 1206.696035, 465.728813, 0.000000, X, Y) && !ellipse(22219.272000, 18938.637600, 1193.128034, 656.896819, 28.099800, X, Y) && !ellipse(23736.434000, 17850.698000, 1556.632045, 1556.632045, 0.000000, X, Y) && !ellipse(37606.130000, 29712.990000, 2701.544078, 980.984028, 125.191800, X, Y) && !ellipse(14934.320175, 20111.886169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33262.931274, 25527.129059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21330.642853, 17608.841370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16590.084061, 22411.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33496.784000, 25629.456200, 1547.880045, 654.775219, 343.706700, X, Y) && !ellipse(38002.390800, 30760.842000, 1918.608055, 730.577621, 104.778500, X, Y) && !ellipse(18060.810400, 17327.229200, 1664.888048, 708.645620, 81.580690, X, Y) && !ellipse(20390.663400, 19380.592600, 1081.640031, 613.521618, 11.985300, X, Y) && !ellipse(25896.332123, 21521.471756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27691.376190, 22322.798096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13778.644333, 19181.302383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23360.255800, 19405.197600, 1496.832043, 499.778414, 18.467000, X, Y) && !ellipse(12974.033760, 23157.918000, 1389.016040, 677.684820, 84.427940, X, Y) && !ellipse(16878.711200, 17317.139200, 1355.736039, 516.036815, 224.261000, X, Y) && !ellipse(12815.390411, 22380.165314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17917.616800, 19979.966000, 1682.568048, 1140.072033, 84.765700, X, Y) && !ellipse(15759.519600, 19739.208400, 2515.432072, 861.992025, 23.505200, X, Y) && !ellipse(21201.202209, 19175.410873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.454132, 20746.561630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17449.482529, 20859.067169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14916.873978, 21099.927444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37010.013947, 28754.279999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37873.572600, 30352.919000, 2534.544073, 740.356821, 110.226400, X, Y) && !ellipse(31858.250854, 23971.204895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21609.021347, 18828.365356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21430.946000, 23582.147800, 1372.800040, 788.505623, 11.602074, X, Y) && !ellipse(36130.775300, 24924.648000, 2601.608075, 628.396818, 113.479500, X, Y) && !ellipse(20073.859512, 16550.740509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31032.388062, 26961.893616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15597.822617, 23353.751282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18568.719421, 18302.739914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17463.199738, 17262.467575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15986.154000, 19633.422000, 1823.408052, 980.360028, 24.669900, X, Y) && !ellipse(25290.757111, 20558.245712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36114.144000, 27723.776000, 1754.384050, 1137.504033, 129.315000, X, Y) && !ellipse(38254.088989, 32054.523895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17356.925552, 17787.413330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38182.822693, 31183.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36203.978600, 25234.212000, 1716.872049, 884.736025, 111.360000, X, Y) && !ellipse(28896.940000, 23670.293600, 1280.632037, 779.852022, 142.726478, X, Y) && !ellipse(23939.043400, 20521.058000, 1107.112032, 1107.112032, 0.000000, X, Y) && !ellipse(32744.408000, 25997.368000, 2202.656063, 2094.464060, 0.000000, X, Y) && !ellipse(16277.701279, 17619.939392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33915.294000, 27681.241000, 1570.912045, 757.088022, 87.399230, X, Y) && !ellipse(36654.052000, 28413.808000, 2941.440085, 1031.288030, 308.249000, X, Y) && !ellipse(18661.742355, 20129.542114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15336.294940, 22691.445000, 1764.456051, 717.025621, 108.420200, X, Y) && !ellipse(13274.476000, 24276.953600, 1572.048045, 1003.880029, 90.000000, X, Y) && !ellipse(19590.287079, 16921.217987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34208.020813, 26740.652679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36052.599762, 27007.416748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22114.596008, 19684.583099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19918.844299, 17419.245728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12084.707600, 24441.049000, 1953.808056, 1312.224038, 23.982700, X, Y) && !ellipse(36069.992000, 24711.238000, 1688.888049, 765.383222, 302.399000, X, Y) && !ellipse(13253.588394, 20428.911270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16905.648895, 18043.086014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21779.864517, 23610.683777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38402.765320, 32573.937897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.535278, 20304.476685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35641.696808, 26221.862610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36057.301819, 26140.239044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.509644, 27696.699524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37972.300110, 33454.438538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18633.328232, 17264.627441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30434.894958, 25093.180450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33901.586400, 27868.705800, 2328.000067, 1042.560030, 274.266000, X, Y) && !ellipse(30526.663391, 24414.589478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18589.967621, 20626.870255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23365.759979, 22925.386200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13171.384705, 28306.732330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38007.914673, 34391.509888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15195.398499, 27187.759613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21156.796844, 24578.895966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29739.922455, 23700.511383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12656.709930, 18918.125259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33678.718000, 27201.154000, 1584.136046, 1584.136046, 0.000000, X, Y) && !ellipse(19190.901642, 17082.226929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12826.079559, 24127.495850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20473.436111, 24547.080750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14090.261139, 29806.040649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18471.056824, 26481.673157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38096.141296, 27456.793732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22766.267639, 23181.779724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18513.346130, 25003.748444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22642.580444, 22323.164490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19877.874542, 24153.682404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.595642, 23272.502075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23084.653442, 20729.606613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16039.497360, 30226.193726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37880.298035, 32751.777069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13515.051697, 29804.585693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29090.528839, 24298.814270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15346.056808, 18818.597504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16114.071823, 29550.587006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25661.646118, 23429.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21340.884628, 19933.838577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23036.464661, 20305.267883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38246.790314, 27883.117096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30134.804962, 25769.541199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.015778, 30915.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14621.949341, 31607.884247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13704.069870, 32654.738403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31275.081635, 24649.432129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12875.980835, 29186.375397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26775.226471, 30145.106476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38079.122559, 33864.491882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32611.296814, 26635.378113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20782.328857, 12281.665802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37734.303284, 28571.571503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14556.767044, 18487.058685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38632.337738, 29094.044098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15624.765854, 22304.778412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28169.485901, 29536.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25230.145447, 33357.413147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13941.231689, 33711.912659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27168.651367, 29452.088074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30020.086456, 24225.192963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18107.319138, 25981.725830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16305.130386, 26123.907959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.270050, 24820.331055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.695114, 24505.837524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24283.200043, 29279.500549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13192.838669, 19610.706909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11978.391098, 19991.460678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12300.444824, 20222.501328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22877.115112, 23888.360016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29640.640289, 30401.754883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37367.282654, 30747.766266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13415.444290, 18829.984924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11777.012436, 32060.157867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19691.616272, 20129.279266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14065.763184, 20613.694672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13862.800797, 18753.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20845.114990, 24058.770416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38329.404205, 28659.421112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12161.337219, 19395.561920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11949.988922, 34664.000854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37317.543335, 26942.296844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12625.182785, 18230.809860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30442.668884, 27447.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20070.981461, 25010.447083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.700165, 29613.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26125.944366, 23861.910614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12324.920212, 34217.809906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13155.275314, 30752.232025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13638.157440, 19808.557037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33897.021301, 32561.106140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28920.713165, 27155.344360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20821.397614, 27632.938995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12547.649292, 30331.850616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13386.562881, 33622.722260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.374359, 24507.754456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25944.242126, 24923.245300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26309.969757, 29795.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36920.242096, 27184.236389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.746918, 29431.753204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.471039, 28687.758240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13278.904099, 31727.732269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24169.116089, 28682.557037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37223.393341, 31461.854980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35445.325531, 23362.311096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22656.514038, 24296.517670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33713.564087, 33088.628601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13837.093475, 31981.022064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11767.547256, 21952.709579, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:50 2013] Writing fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src6.gif
[Sat May 11 20:43:17 2013] Mean detx,y = (871.20, 4932.55) 
[Sat May 11 20:43:20 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 20:47:14 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 20:47:14 2013] Setting source spectrum file to fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 11 20:47:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src6_bgd.pi.gz