[Fri May 10 02:57:57 2013] Detection parameters:
  Position = (357.3, 310.5) = 15 2 2.92 -42 2 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.7 +/- 26.3
  Background counts = 308.8
  Rate = 0.01 +/- 0.0009

[Fri May 10 02:58:06 2013] Off-axis axis estimate = 4.35'
[Fri May 10 16:22:07 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Fri May 10 16:22:07 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Fri May 10 16:22:07 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.814
[Fri May 10 16:22:07 2013] Giving source the simple spatial ID 74 for pass 0, mean size = 8.60"
[Fri May 10 21:17:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src74.ximg exists
[Fri May 10 21:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src74.csv
[Fri May 10 21:17:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src74_1.ximg exists
[Fri May 10 21:17:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src74.csv
[Fri May 10 21:17:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:03 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Fri May 10 21:17:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Fri May 10 21:17:03 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Fri May 10 21:17:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Fri May 10 21:17:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:51 2013] Spatial fit model total counts = 3198.410000, observed total counts = 2704.000000
[Fri May 10 21:17:51 2013] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:17:52 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:52 2013] Assessing source extent using major
[Fri May 10 21:17:52 2013] Source does appear to be extended
[Fri May 10 21:17:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 13:09:53 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sat May 11 13:09:53 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Sat May 11 13:09:53 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.814
[Sat May 11 13:09:53 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 8.60"
[Sat May 11 20:25:58 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src72.ximg exists
[Sat May 11 20:25:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src72.csv
[Sat May 11 20:25:58 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src72_1.ximg exists
[Sat May 11 20:25:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src72.csv
[Sat May 11 20:25:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sat May 11 20:26:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sat May 11 20:26:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sat May 11 20:26:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Sat May 11 20:26:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:27:17 2013] Spatial fit model total counts = 3198.400000, observed total counts = 2704.000000
[Sat May 11 20:27:17 2013] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 20:27:18 2013] Source 57 is offset by -6.372413 and 6.088294 pixels which is larger than
2 X fitted extent = 1.046998 x 1.046998, not incorporating fit results
[Sat May 11 20:27:18 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:27:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:27:18 2013] Assessing source extent using major
[Sat May 11 20:27:18 2013] Source does appear to be extended
[Sat May 11 20:27:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 20:37:58 2013] XMMSAS src. selection expression = ellipse(31032.388062, 26961.893616, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 20:37:58 2013] Writing source region out to fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src57_src.reg
[Sat May 11 20:37:58 2013] Extracting stamp from image fullrun_mos2_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (320, 273) - (395, 348)
[Sat May 11 20:37:58 2013] XMMSAS bgd. selection expression = annulus(31032.388062, 26961.893616, 1087.500000, 2175.000000, X, Y) && !ellipse(34253.658000, 23878.910000, 2227.696064, 820.408024, 304.416000, X, Y) && !ellipse(30756.826000, 22640.120000, 2864.368082, 1585.120046, 118.222000, X, Y) && !ellipse(34622.204000, 25268.568000, 3257.632094, 1867.136054, 292.342900, X, Y) && !ellipse(33262.931274, 25527.129059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33496.784000, 25629.456200, 1547.880045, 654.775219, 343.706700, X, Y) && !ellipse(31858.250854, 23971.204895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28896.940000, 23670.293600, 1280.632037, 779.852022, 142.726478, X, Y) && !ellipse(32744.408000, 25997.368000, 2202.656063, 2094.464060, 0.000000, X, Y) && !ellipse(33915.294000, 27681.241000, 1570.912045, 757.088022, 87.399230, X, Y) && !ellipse(30434.894958, 25093.180450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33901.586400, 27868.705800, 2328.000067, 1042.560030, 274.266000, X, Y) && !ellipse(30526.663391, 24414.589478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33678.718000, 27201.154000, 1584.136046, 1584.136046, 0.000000, X, Y) && !ellipse(29090.528839, 24298.814270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30134.804962, 25769.541199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31275.081635, 24649.432129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32611.296814, 26635.378113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28169.485901, 29536.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30020.086456, 24225.192963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.270050, 24820.331055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30442.668884, 27447.174561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29142.700165, 29613.394379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28920.713165, 27155.344360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.471039, 28687.758240, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:58 2013] Writing fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src57.gif