[Fri May 10 02:57:59 2013] Detection parameters:
  Position = (267.0, 213.0) = 15 2 38.19 -42 9 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 609.9 +/- 35.5
  Background counts = 114.5
  Rate = 0.02 +/- 0.001

[Fri May 10 02:58:06 2013] Off-axis axis estimate = 6.60'
[Fri May 10 16:22:07 2013] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Fri May 10 16:22:07 2013] Initial guess for spatial extent in simple fitting = 9.73"
[Fri May 10 16:22:07 2013] source mask rpix=2.2, npix_max = 29, mask sum = 31, frac = 1.035
[Fri May 10 16:22:07 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 9.73"
[Fri May 10 21:17:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src42.ximg exists
[Fri May 10 21:17:01 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri May 10 21:17:01 2013] Fit fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_src42 appears to have run properly
[Fri May 10 21:17:02 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri May 10 21:17:02 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri May 10 21:17:02 2013] Fit fullrun_mos2_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri May 10 21:17:51 2013] Spatial fit model total counts = 5102.540000, observed total counts = 5129.000000
[Fri May 10 21:17:51 2013] Offset between fit and detection position for source 110 = 9.686418 pixels
[Fri May 10 21:17:51 2013] 5069.680000 total counts/ 4522.170000 bgd. counts: snr = 8.141766
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 9.686418 pixels
  Position = (273.4, 205.7) = 15 2 35.69 -42 9 55.4
  Extent = 19.5 (19.4-38.9)", rotation angle = 0
  Source counts = 547.5 +/- 71.2
  Background counts = 4522.2
  Rate = 0.01 +/- 0.002
[Fri May 10 21:17:52 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:52 2013] Assessing source extent using major axis lower bound
[Fri May 10 21:17:52 2013] Source does appear to be extended
[Fri May 10 21:17:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:17:52 2013] Source is confused with source 25
[Sat May 11 13:09:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 13:09:53 2013] Initial guess for spatial extent in simple fitting = 19.46"
[Sat May 11 13:09:53 2013] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.011
[Sat May 11 13:09:53 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 19.46"
[Sat May 11 20:25:57 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src41.ximg exists
[Sat May 11 20:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src41.csv
[Sat May 11 20:25:57 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat May 11 20:25:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src41.csv
[Sat May 11 20:25:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:00 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat May 11 20:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat May 11 20:26:00 2013] fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat May 11 20:26:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat May 11 20:26:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:27:17 2013] Warning, spatial fit 41 centroid is now closest to src. 29
[Sat May 11 20:27:18 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:27:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:27:18 2013] Assessing source extent using major axis lower bound
[Sat May 11 20:27:18 2013] Source does appear to be extended
[Sat May 11 20:27:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 20:37:55 2013] XMMSAS src. selection expression = ellipse(23736.434000, 17850.698000, 1167.474034, 1167.474034, 0.000000, X, Y)
[Sat May 11 20:37:55 2013] Writing source region out to fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src110_src.reg
[Sat May 11 20:37:55 2013] Extracting stamp from image fullrun_mos2_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (206, 139) - (340, 273)
[Sat May 11 20:37:55 2013] XMMSAS bgd. selection expression = annulus(23736.434000, 17850.698000, 1945.790056, 3891.580112, X, Y) && !ellipse(28750.337600, 19423.580200, 1499.104043, 659.873619, 334.799900, X, Y) && !ellipse(27644.422000, 19126.796000, 1502.376043, 815.568023, 323.433500, X, Y) && !ellipse(25783.506653, 18219.008255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29521.948600, 19808.501000, 2179.288063, 726.654421, 324.455000, X, Y) && !ellipse(26569.456390, 18583.523865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.469666, 18921.523697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26397.909637, 19363.278091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27504.650635, 19791.005966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24118.944000, 18287.796000, 1050.608030, 382.054411, 27.888700, X, Y) && !ellipse(28871.916800, 20889.122200, 1427.784041, 517.119215, 51.316100, X, Y) && !ellipse(25631.028320, 18996.173828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22933.675020, 17041.190000, 542.728816, 542.728816, 0.000000, X, Y) && !ellipse(23238.598000, 17511.954000, 1591.800046, 1591.800046, 0.000000, X, Y) && !ellipse(24747.992126, 18478.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24770.538635, 22216.865082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21134.190000, 18150.802000, 1581.432046, 1581.432046, 0.000000, X, Y) && !ellipse(25278.695312, 22582.866180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21867.168600, 17257.982000, 1652.784048, 1652.784048, 0.000000, X, Y) && !ellipse(24065.375000, 19521.826000, 1095.504032, 1095.504032, 0.000000, X, Y) && !ellipse(22660.329315, 17692.284958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22219.272000, 18938.637600, 1193.128034, 656.896819, 28.099800, X, Y) && !ellipse(21330.642853, 17608.841370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20390.663400, 19380.592600, 1081.640031, 613.521618, 11.985300, X, Y) && !ellipse(25896.332123, 21521.471756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27691.376190, 22322.798096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23360.255800, 19405.197600, 1496.832043, 499.778414, 18.467000, X, Y) && !ellipse(21201.202209, 19175.410873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25952.454132, 20746.561630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21609.021347, 18828.365356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20073.859512, 16550.740509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.757111, 20558.245712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23939.043400, 20521.058000, 1107.112032, 1107.112032, 0.000000, X, Y) && !ellipse(19590.287079, 16921.217987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22114.596008, 19684.583099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19918.844299, 17419.245728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.535278, 20304.476685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19190.901642, 17082.226929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22642.580444, 22323.164490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23084.653442, 20729.606613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21340.884628, 19933.838577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23036.464661, 20305.267883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19691.616272, 20129.279266, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:55 2013] Writing fullrun_mos2_xmm0202590101_pi300-10000_pass1_cl_src110.gif