[Fri May 10 02:55:56 2013] Detection parameters:
  Position = (205.0, 232.8) = 15 3 2.43 -42 7 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 437.8 +/- 32.7
  Background counts = 173.1
  Rate = 0.01 +/- 0.001

[Fri May 10 02:56:04 2013] Off-axis axis estimate = 8.28'
[Fri May 10 10:56:22 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Fri May 10 10:56:22 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Fri May 10 10:56:22 2013] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.962
[Fri May 10 10:56:22 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 10.57"
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src60.ximg exists
[Fri May 10 16:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src60.csv
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri May 10 16:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src60.csv
[Fri May 10 16:22:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri May 10 16:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri May 10 16:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri May 10 16:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:37 2013] Spatial fit model total counts = 4065.710000, observed total counts = 3438.000000
[Fri May 10 21:17:37 2013] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:17:38 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:38 2013] Assessing source extent using major
[Fri May 10 21:17:38 2013] Source does appear to be extended
[Fri May 10 21:17:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 04:39:37 2013] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:39:37 2013] Initial guess for spatial extent in simple fitting = 10.57"
[Sat May 11 04:39:37 2013] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.962
[Sat May 11 04:39:37 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 10.57"
[Sat May 11 13:09:49 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src59.ximg exists
[Sat May 11 13:09:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src59.csv
[Sat May 11 13:09:49 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat May 11 13:09:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src59.csv
[Sat May 11 13:09:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:09:52 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat May 11 13:09:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat May 11 13:09:52 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat May 11 13:09:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat May 11 13:09:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:55 2013] Spatial fit model total counts = 4026.920000, observed total counts = 3438.000000
[Sat May 11 20:26:55 2013] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 20:26:56 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:26:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:26:56 2013] Assessing source extent using major
[Sat May 11 20:26:56 2013] Source does appear to be extended
[Sat May 11 20:26:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 20:26:56 2013] Source is confused with source 82
[Sat May 11 20:37:14 2013] XMMSAS src. selection expression = ellipse(17786.571686, 20209.027054, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 20:37:14 2013] Writing source region out to fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src70_src.reg
[Sat May 11 20:37:14 2013] Extracting stamp from image fullrun_mos1_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (168, 195) - (243, 270)
[Sat May 11 20:37:14 2013] XMMSAS bgd. selection expression = annulus(17786.571686, 20209.027054, 1087.500000, 2175.000000, X, Y) && !ellipse(15347.777267, 17447.843048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16648.060000, 22554.168000, 1114.160032, 637.249618, 69.304200, X, Y) && !ellipse(17940.056274, 19431.895996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20650.468800, 19246.465800, 1403.440040, 480.884814, 348.764600, X, Y) && !ellipse(17560.542404, 19001.315292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17081.872482, 17184.253067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17660.024140, 18354.119720, 3358.336097, 1766.592051, 102.803800, X, Y) && !ellipse(18103.286148, 17437.888016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14728.690000, 20159.294040, 1103.496032, 581.028017, 51.594200, X, Y) && !ellipse(14032.500000, 19061.069600, 1986.120057, 1986.120057, 0.000000, X, Y) && !ellipse(16118.177826, 19449.955505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12880.706800, 22752.204200, 2803.288081, 823.672024, 92.828750, X, Y) && !ellipse(17351.871704, 21185.487091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17339.035965, 17962.489944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19516.356800, 16533.849000, 1787.736051, 1035.712030, 16.605000, X, Y) && !ellipse(15317.702800, 22612.870000, 1430.240041, 522.469615, 80.341730, X, Y) && !ellipse(21181.180000, 19425.392800, 1545.704044, 567.565616, 331.992000, X, Y) && !ellipse(18894.840652, 19872.462265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16397.627625, 22311.392090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13075.512000, 19015.145000, 3972.240114, 2587.608074, 133.254500, X, Y) && !ellipse(18735.573410, 20300.933548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14906.247223, 21392.162537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17287.876205, 19683.688354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15717.945435, 22230.490692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19450.663071, 17873.931442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16570.104965, 17692.420364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14998.036896, 20799.875946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19089.855209, 19364.232574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15015.947723, 17956.854645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18004.082306, 21028.966476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.335922, 18052.938828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17109.248000, 18334.668000, 1751.560050, 1751.560050, 0.000000, X, Y) && !ellipse(16785.467667, 20978.923157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18189.352905, 21447.563705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15616.118423, 21634.617157, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:14 2013] Writing fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src70.gif