[Fri May 10 02:55:55 2013] Detection parameters:
  Position = (367.3, 265.8) = 15 1 59.00 -42 5 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 649.1 +/- 38.1
  Background counts = 228.4
  Rate = 0.02 +/- 0.001

[Fri May 10 02:56:04 2013] Off-axis axis estimate = 5.52'
[Fri May 10 10:56:22 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Fri May 10 10:56:22 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Fri May 10 10:56:22 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.879
[Fri May 10 10:56:22 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 9.19"
[Fri May 10 16:22:04 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src36.ximg exists
[Fri May 10 16:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src36.csv
[Fri May 10 16:22:04 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src36_1.ximg exists
[Fri May 10 16:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src36.csv
[Fri May 10 16:22:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:22:06 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Fri May 10 16:22:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri May 10 16:22:06 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Fri May 10 16:22:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Fri May 10 16:22:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:37 2013] Spatial fit model total counts = 10859.800000, observed total counts = 4851.000000
[Fri May 10 21:17:37 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:17:38 2013] Spatial fit model total counts = 5279.650000, observed total counts = 4313.000000
[Fri May 10 21:17:38 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:17:38 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:38 2013] Assessing source extent using major
[Fri May 10 21:17:38 2013] Source does appear to be extended
[Fri May 10 21:17:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:17:38 2013] Source is confused with source 34
[Sat May 11 04:39:37 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:39:37 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Sat May 11 04:39:37 2013] source mask rpix=2.1, npix_max = 27, mask sum = 24, frac = 0.879
[Sat May 11 04:39:37 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 9.19"
[Sat May 11 13:09:48 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src36.ximg exists
[Sat May 11 13:09:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src36.csv
[Sat May 11 13:09:48 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat May 11 13:09:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src36.csv
[Sat May 11 13:09:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:09:51 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat May 11 13:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat May 11 13:09:51 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat May 11 13:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat May 11 13:09:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:55 2013] Spatial fit model total counts = 10215.300000, observed total counts = 4851.000000
[Sat May 11 20:26:55 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 20:26:56 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:26:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:26:56 2013] Assessing source extent using major
[Sat May 11 20:26:56 2013] Source does appear to be extended
[Sat May 11 20:26:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 20:37:11 2013] XMMSAS src. selection expression = ellipse(31902.263275, 23076.640564, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 20:37:11 2013] Writing source region out to fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src44_src.reg
[Sat May 11 20:37:11 2013] Extracting stamp from image fullrun_mos1_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (330, 228) - (405, 303)
[Sat May 11 20:37:11 2013] XMMSAS bgd. selection expression = annulus(31902.263275, 23076.640564, 1087.500000, 2175.000000, X, Y) && !ellipse(28277.773400, 19281.524200, 2316.488067, 772.332822, 336.482100, X, Y) && !ellipse(32227.066284, 21690.838730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33325.282000, 22753.006000, 2201.488063, 851.872025, 132.813500, X, Y) && !ellipse(29366.138000, 19725.296000, 2123.344061, 780.924822, 328.255900, X, Y) && !ellipse(29554.466000, 19688.370600, 2318.032067, 2257.344065, 351.465370, X, Y) && !ellipse(30227.190000, 20727.073000, 1472.088042, 1472.088042, 0.000000, X, Y) && !ellipse(29383.836000, 20778.369600, 1445.080042, 856.592025, 338.365700, X, Y) && !ellipse(29664.780000, 20078.206000, 2944.176085, 1336.432038, 141.931200, X, Y) && !ellipse(33614.614000, 23104.810000, 2366.992068, 847.128024, 132.552000, X, Y) && !ellipse(27800.416400, 19086.697900, 2271.304065, 869.448025, 335.923000, X, Y) && !ellipse(34869.810800, 25009.358000, 1624.288047, 912.144026, 298.275000, X, Y) && !ellipse(34103.780000, 23616.502000, 1609.144046, 757.848022, 126.037300, X, Y) && !ellipse(28822.420000, 20341.052000, 1420.608041, 1420.608041, 0.000000, X, Y) && !ellipse(30074.185333, 21170.397232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32965.674194, 23695.140259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.890000, 24695.100600, 3153.888091, 1435.608041, 125.736300, X, Y) && !ellipse(30409.234000, 22054.388000, 1435.032041, 755.632022, 327.975100, X, Y) && !ellipse(33596.339233, 23962.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27621.448000, 20198.713600, 4371.408126, 4371.408126, 0.000000, X, Y) && !ellipse(30006.154000, 21894.065200, 1404.360040, 433.863212, 345.636000, X, Y) && !ellipse(30887.616000, 22485.532000, 1445.744042, 816.520023, 136.984000, X, Y) && !ellipse(32055.110657, 22505.660583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31358.919495, 22828.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28804.035400, 22141.337600, 1362.048039, 578.078417, 89.461402, X, Y) && !ellipse(28741.528180, 23592.750000, 1294.432037, 406.092812, 347.365700, X, Y) && !ellipse(33242.665436, 25446.564850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28799.865600, 22690.759000, 1328.600038, 605.637617, 32.085000, X, Y) && !ellipse(30187.517914, 23918.983124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31531.347717, 23819.087646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30222.062500, 22998.205688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32883.166000, 25807.664000, 1518.048044, 1518.048044, 0.000000, X, Y) && !ellipse(30922.560120, 24201.921631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35645.552000, 26304.994000, 1654.864048, 1654.864048, 0.000000, X, Y) && !ellipse(30093.277649, 25191.267853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30336.451782, 25607.260498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30541.900604, 24758.378601, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:11 2013] Writing fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src44.gif