[Fri May 10 02:55:59 2013] Detection parameters:
  Position = (286.4, 235.0) = 15 2 30.61 -42 7 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.7 +/- 33.4
  Background counts = 263.0
  Rate = 0.01 +/- 0.001

[Fri May 10 02:56:04 2013] Off-axis axis estimate = 4.68'
[Fri May 10 10:56:22 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Fri May 10 10:56:22 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Fri May 10 10:56:22 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.711
[Fri May 10 10:56:22 2013] Giving source the simple spatial ID 99 for pass 0, mean size = 8.77"
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src99.ximg exists
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src99_1.ximg exists
[Fri May 10 16:22:05 2013] Fit fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src99 appears to have run properly
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Fri May 10 16:22:07 2013] Fit fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Fri May 10 21:17:38 2013] Warning, spatial fit 99 centroid is now closest to src. 128
[Fri May 10 21:17:38 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:38 2013] Assessing source extent using major
[Fri May 10 21:17:38 2013] Source does appear to be extended
[Fri May 10 21:17:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:17:38 2013] Source is confused with source 130
[Sat May 11 04:39:37 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:39:37 2013] Initial guess for spatial extent in simple fitting = 8.77"
[Sat May 11 04:39:37 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.711
[Sat May 11 04:39:37 2013] Giving source the simple spatial ID 97 for pass 1, mean size = 8.77"
[Sat May 11 13:09:50 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src97.ximg exists
[Sat May 11 13:09:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src97.csv
[Sat May 11 13:09:50 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src97_1.ximg exists
[Sat May 11 13:09:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src97.csv
[Sat May 11 13:09:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:09:53 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src97.ximg exists
[Sat May 11 13:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src97.csv
[Sat May 11 13:09:53 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src97_1.ximg exists
[Sat May 11 13:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src97.csv
[Sat May 11 13:09:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:55 2013] Spatial fit model total counts = 4914.390000, observed total counts = 4717.000000
[Sat May 11 20:26:55 2013] Offset between fit and detection position for source 160 = 1.177620 pixels
[Sat May 11 20:26:55 2013] Warning, changing simple spatial fit ID from 97 to 73
[Sat May 11 20:26:55 2013] 4505.078000 total counts/ 4365.940000 bgd. counts: snr = 2.105750
Spatial fit parameters:
  Offset between fit and detection position for source 160 = 1.177620 pixels
  Position = (285.2, 235.1) = 15 2 31.07 -42 7 47.7
  Extent = 11.8 (6.1-14.8)" x 5.8 (3.1-9.2)", rotation angle = 4 (329-69) degrees
  Source counts = 139.1 +/- 67.1
  Background counts = 4365.9
  Rate = 0.003 +/- 0.002
[Sat May 11 20:26:56 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:26:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:26:56 2013] Assessing source extent using major axis lower bound
[Sat May 11 20:26:56 2013] Source does appear to be extended
[Sat May 11 20:26:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.66
[Sat May 11 20:37:17 2013] XMMSAS src. selection expression = ellipse(24762.790000, 20405.826000, 708.810020, 346.665610, 3.570230, X, Y)
[Sat May 11 20:37:17 2013] Writing source region out to fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src160_src.reg
[Sat May 11 20:37:17 2013] Extracting stamp from image fullrun_mos1_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (244, 194) - (326, 276)
[Sat May 11 20:37:17 2013] XMMSAS bgd. selection expression = annulus(24762.790000, 20405.826000, 1181.350034, 2362.700068, X, Y) && !ellipse(28277.773400, 19281.524200, 2316.488067, 772.332822, 336.482100, X, Y) && !ellipse(25893.470001, 18224.905075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27615.870802, 19024.982400, 1916.112055, 865.544025, 328.778000, X, Y) && !ellipse(25218.155334, 22081.787811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29664.780000, 20078.206000, 2944.176085, 1336.432038, 141.931200, X, Y) && !ellipse(27800.416400, 19086.697900, 2271.304065, 869.448025, 335.923000, X, Y) && !ellipse(26099.519680, 19447.017600, 2467.744071, 1254.296036, 326.847500, X, Y) && !ellipse(23955.010000, 18045.662000, 1598.792046, 1175.088034, 319.021000, X, Y) && !ellipse(25425.524000, 19117.640600, 1489.376043, 889.320026, 351.588710, X, Y) && !ellipse(26672.886000, 19710.254000, 2381.040069, 798.752023, 330.563900, X, Y) && !ellipse(25106.245000, 22519.208000, 1257.440036, 400.584812, 340.299700, X, Y) && !ellipse(23119.342000, 17646.336600, 1598.792046, 993.288029, 344.326400, X, Y) && !ellipse(27621.448000, 20198.713600, 4371.408126, 4371.408126, 0.000000, X, Y) && !ellipse(21794.790000, 17051.064000, 1645.904047, 593.860817, 80.096630, X, Y) && !ellipse(24842.738400, 22344.218000, 1306.080038, 934.112027, 142.490200, X, Y) && !ellipse(27578.184000, 21418.932000, 1357.648039, 479.048014, 321.716000, X, Y) && !ellipse(21792.228200, 17212.810000, 1644.736047, 1644.736047, 0.000000, X, Y) && !ellipse(23079.223907, 18567.130386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22728.290000, 19111.050000, 1553.688045, 1553.688045, 0.000000, X, Y) && !ellipse(23884.163300, 19380.788000, 775.328822, 775.328822, 0.000000, X, Y) && !ellipse(22391.478394, 17352.303146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25473.460000, 20793.728000, 827.768024, 827.768024, 0.000000, X, Y) && !ellipse(22586.006080, 22393.562400, 781.048022, 434.657613, 329.866900, X, Y) && !ellipse(25409.003000, 20742.202940, 592.710417, 592.710417, 0.000000, X, Y) && !ellipse(22686.093719, 20162.225525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21181.180000, 19425.392800, 1545.704044, 567.565616, 331.992000, X, Y) && !ellipse(26957.284485, 21090.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22828.263200, 20721.667600, 1424.096041, 399.278411, 349.018100, X, Y) && !ellipse(27749.877106, 22214.306961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21909.404724, 20502.751617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23879.104584, 20122.086792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22174.196000, 19792.806000, 1468.416042, 879.408025, 336.821300, X, Y) && !ellipse(22474.649841, 23357.210785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23001.325348, 23000.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23435.990814, 22930.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.056335, 21432.229584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23778.449768, 20644.413361, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:17 2013] Writing fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src160.gif