[Fri May 10 02:55:58 2013] Detection parameters:
  Position = (247.9, 225.0) = 15 2 45.65 -42 8 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 365.3 +/- 29.8
  Background counts = 199.2
  Rate = 0.01 +/- 0.0009

[Fri May 10 02:56:04 2013] Off-axis axis estimate = 6.46'
[Fri May 10 10:56:22 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Fri May 10 10:56:22 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Fri May 10 10:56:22 2013] source mask rpix=2.2, npix_max = 29, mask sum = 32, frac = 1.081
[Fri May 10 10:56:22 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 9.66"
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src83.ximg exists
[Fri May 10 16:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src83.csv
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src83_1.ximg exists
[Fri May 10 16:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src83.csv
[Fri May 10 16:22:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Fri May 10 16:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Fri May 10 16:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri May 10 16:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:38 2013] Warning, spatial fit 83 centroid is now closest to src. 161
[Fri May 10 21:17:38 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:38 2013] Assessing source extent using major
[Fri May 10 21:17:38 2013] Source does appear to be extended
[Fri May 10 21:17:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 21:17:38 2013] Source is confused with source 186
[Sat May 11 04:39:37 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:39:37 2013] Initial guess for spatial extent in simple fitting = 9.66"
[Sat May 11 04:39:37 2013] source mask rpix=2.2, npix_max = 29, mask sum = 32, frac = 1.081
[Sat May 11 04:39:37 2013] Giving source the simple spatial ID 81 for pass 1, mean size = 9.66"
[Sat May 11 13:09:49 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src81.ximg exists
[Sat May 11 13:09:49 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src81_1.ximg exists
[Sat May 11 13:09:49 2013] Fit fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src81 appears to have run properly
[Sat May 11 13:09:53 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Sat May 11 13:09:53 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Sat May 11 13:09:53 2013] Fit fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src81 appears to have run properly
[Sat May 11 20:26:55 2013] Spatial fit model total counts = 3565.270000, observed total counts = 3458.000000
[Sat May 11 20:26:55 2013] Offset between fit and detection position for source 134 = 4.049168 pixels
[Sat May 11 20:26:55 2013] 3533.338000 total counts/ 3027.440000 bgd. counts: snr = 9.194438
Spatial fit parameters:
  Offset between fit and detection position for source 134 = 4.049168 pixels
  Position = (244.0, 223.8) = 15 2 47.17 -42 8 36.6
  Extent = 19.3 (17.9-38.6)" x 7.1 (5.7-8.9)", rotation angle = 332 (326-341) degrees
  Source counts = 505.9 +/- 59.4
  Background counts = 3027.4
  Rate = 0.01 +/- 0.001
[Sat May 11 20:26:56 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:26:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:26:56 2013] Assessing source extent using major axis lower bound
[Sat May 11 20:26:56 2013] Source does appear to be extended
[Sat May 11 20:26:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.02
[Sat May 11 20:26:56 2013] Source is asymmetric
[Sat May 11 20:37:16 2013] XMMSAS src. selection expression = ellipse(21181.180000, 19425.392800, 1159.278033, 425.674212, 331.992000, X, Y)
[Sat May 11 20:37:16 2013] Writing source region out to fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src134_src.reg
[Sat May 11 20:37:16 2013] Extracting stamp from image fullrun_mos1_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (177, 157) - (311, 290)
[Sat May 11 20:37:16 2013] XMMSAS bgd. selection expression = annulus(21181.180000, 19425.392800, 1932.130056, 3864.260111, X, Y) && !ellipse(25893.470001, 18224.905075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25218.155334, 22081.787811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26099.519680, 19447.017600, 2467.744071, 1254.296036, 326.847500, X, Y) && !ellipse(23955.010000, 18045.662000, 1598.792046, 1175.088034, 319.021000, X, Y) && !ellipse(25425.524000, 19117.640600, 1489.376043, 889.320026, 351.588710, X, Y) && !ellipse(26672.886000, 19710.254000, 2381.040069, 798.752023, 330.563900, X, Y) && !ellipse(25106.245000, 22519.208000, 1257.440036, 400.584812, 340.299700, X, Y) && !ellipse(23119.342000, 17646.336600, 1598.792046, 993.288029, 344.326400, X, Y) && !ellipse(27621.448000, 20198.713600, 4371.408126, 4371.408126, 0.000000, X, Y) && !ellipse(21794.790000, 17051.064000, 1645.904047, 593.860817, 80.096630, X, Y) && !ellipse(24842.738400, 22344.218000, 1306.080038, 934.112027, 142.490200, X, Y) && !ellipse(22968.775400, 17039.392600, 661.858419, 297.404009, 149.364600, X, Y) && !ellipse(21172.006180, 17439.985489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16648.060000, 22554.168000, 1114.160032, 637.249618, 69.304200, X, Y) && !ellipse(21792.228200, 17212.810000, 1644.736047, 1644.736047, 0.000000, X, Y) && !ellipse(20973.425919, 18044.713547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23079.223907, 18567.130386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17940.056274, 19431.895996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20650.468800, 19246.465800, 1403.440040, 480.884814, 348.764600, X, Y) && !ellipse(22728.290000, 19111.050000, 1553.688045, 1553.688045, 0.000000, X, Y) && !ellipse(23884.163300, 19380.788000, 775.328822, 775.328822, 0.000000, X, Y) && !ellipse(17560.542404, 19001.315292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17081.872482, 17184.253067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.478394, 17352.303146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17660.024140, 18354.119720, 3358.336097, 1766.592051, 102.803800, X, Y) && !ellipse(18103.286148, 17437.888016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17786.571686, 20209.027054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25473.460000, 20793.728000, 827.768024, 827.768024, 0.000000, X, Y) && !ellipse(21372.714447, 23625.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17351.871704, 21185.487091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17339.035965, 17962.489944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22586.006080, 22393.562400, 781.048022, 434.657613, 329.866900, X, Y) && !ellipse(25409.003000, 20742.202940, 592.710417, 592.710417, 0.000000, X, Y) && !ellipse(19516.356800, 16533.849000, 1787.736051, 1035.712030, 16.605000, X, Y) && !ellipse(22686.093719, 20162.225525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18894.840652, 19872.462265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22828.263200, 20721.667600, 1424.096041, 399.278411, 349.018100, X, Y) && !ellipse(24762.790000, 20405.826000, 945.080027, 462.220813, 3.570230, X, Y) && !ellipse(18735.573410, 20300.933548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19981.431305, 16553.751312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21909.404724, 20502.751617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23879.104584, 20122.086792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17287.876205, 19683.688354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19450.663071, 17873.931442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16570.104965, 17692.420364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22174.196000, 19792.806000, 1468.416042, 879.408025, 336.821300, X, Y) && !ellipse(19089.855209, 19364.232574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20723.737671, 24103.672272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24119.708649, 16746.709549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18004.082306, 21028.966476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20038.833038, 23958.338623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.335922, 18052.938828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17109.248000, 18334.668000, 1751.560050, 1751.560050, 0.000000, X, Y) && !ellipse(22474.649841, 23357.210785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23001.325348, 23000.027039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16785.467667, 20978.923157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23435.990814, 22930.173218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18189.352905, 21447.563705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18336.264969, 16669.865036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23778.449768, 20644.413361, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:16 2013] Writing fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src134.gif