[Fri May 10 02:55:57 2013] Detection parameters:
  Position = (356.7, 310.4) = 15 2 3.16 -42 2 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.1 +/- 23.1
  Background counts = 293.9
  Rate = 0.01 +/- 0.001

[Fri May 10 02:56:04 2013] Off-axis axis estimate = 4.31'
[Fri May 10 10:56:22 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Fri May 10 10:56:22 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Fri May 10 10:56:22 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.654
[Fri May 10 10:56:22 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 8.58"
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src79.ximg exists
[Fri May 10 16:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src79.csv
[Fri May 10 16:22:05 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src79_1.ximg exists
[Fri May 10 16:22:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src79.csv
[Fri May 10 16:22:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Fri May 10 16:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src79.csv
[Fri May 10 16:22:07 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Fri May 10 16:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src79.csv
[Fri May 10 16:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 21:17:37 2013] Spatial fit model total counts = 3128.100000, observed total counts = 2457.000000
[Fri May 10 21:17:37 2013] Poor agreement between spatial fit and data for source 110
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 21:17:38 2013] Vigneting correction estimate = 1.000000
[Fri May 10 21:17:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 21:17:38 2013] Assessing source extent using major
[Fri May 10 21:17:38 2013] Source does appear to be extended
[Fri May 10 21:17:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 04:39:37 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:39:37 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Sat May 11 04:39:37 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.654
[Sat May 11 04:39:37 2013] Giving source the simple spatial ID 77 for pass 1, mean size = 8.58"
[Sat May 11 13:09:49 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src77.ximg exists
[Sat May 11 13:09:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src77.csv
[Sat May 11 13:09:49 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat May 11 13:09:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src77.csv
[Sat May 11 13:09:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 13:09:52 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat May 11 13:09:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Sat May 11 13:09:52 2013] fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat May 11 13:09:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Sat May 11 13:09:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202590101_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 20:26:55 2013] Spatial fit model total counts = 3123.580000, observed total counts = 2457.000000
[Sat May 11 20:26:55 2013] Poor agreement between spatial fit and data for source 110
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 20:26:56 2013] Vigneting correction estimate = 1.000000
[Sat May 11 20:26:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 20:26:56 2013] Assessing source extent using major
[Sat May 11 20:26:56 2013] Source does appear to be extended
[Sat May 11 20:26:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 20:37:15 2013] XMMSAS src. selection expression = ellipse(30980.190186, 26957.475647, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 20:37:15 2013] Writing source region out to fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src110_src.reg
[Sat May 11 20:37:15 2013] Extracting stamp from image fullrun_mos1_xmm0202590101_pi300-10000_cl_sm2.00.img.gz, (319, 273) - (394, 348)
[Sat May 11 20:37:15 2013] XMMSAS bgd. selection expression = annulus(30980.190186, 26957.475647, 1087.500000, 2175.000000, X, Y) && !ellipse(33325.282000, 22753.006000, 2201.488063, 851.872025, 132.813500, X, Y) && !ellipse(33614.614000, 23104.810000, 2366.992068, 847.128024, 132.552000, X, Y) && !ellipse(34103.780000, 23616.502000, 1609.144046, 757.848022, 126.037300, X, Y) && !ellipse(34566.890000, 24695.100600, 3153.888091, 1435.608041, 125.736300, X, Y) && !ellipse(33596.339233, 23962.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28741.528180, 23592.750000, 1294.432037, 406.092812, 347.365700, X, Y) && !ellipse(33242.665436, 25446.564850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30187.517914, 23918.983124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32883.166000, 25807.664000, 1518.048044, 1518.048044, 0.000000, X, Y) && !ellipse(30922.560120, 24201.921631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32754.623260, 26588.755798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33644.408539, 27170.114288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30093.277649, 25191.267853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30336.451782, 25607.260498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30541.900604, 24758.378601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29173.166626, 28840.571106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28902.781097, 28139.271667, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 20:37:15 2013] Writing fullrun_mos1_xmm0202590101_pi300-10000_pass1_cl_src110.gif