[Sun Apr  1 10:39:48 2012] Detection parameters:
  Position = (143.8, 226.2) = 13 23 47.22 -67 54 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.6 +/- 20.0
  Background counts = 31.6
  Rate = 0.01 +/- 0.001

[Sun Apr  1 10:39:50 2012] Off-axis axis estimate = 12.38'
[Sun Apr  1 10:42:16 2012] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Sun Apr  1 10:42:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr  1 10:42:16 2012] Initial guess for spatial extent in simple fitting = 12.62"
[Sun Apr  1 10:42:16 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Sun Apr  1 10:42:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.62"
[Sun Apr  1 11:38:44 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Apr  1 11:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_src1.csv
[Sun Apr  1 11:38:44 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Apr  1 11:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_src1.csv
[Sun Apr  1 11:38:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 11:38:45 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Apr  1 11:38:45 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Apr  1 11:38:45 2012] Fit fullrun_pn_xmm0202370201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Apr  1 12:53:23 2012] Spatial fit model total counts = 757.996000, observed total counts = 758.000000
[Sun Apr  1 12:53:23 2012] Offset between fit and detection position for source 1 = 0.322131 pixels
[Sun Apr  1 12:53:23 2012] 762.531000 total counts/ 624.863000 bgd. counts: snr = 5.507324
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.322131 pixels
  Position = (144.1, 226.2) = 13 23 46.99 -67 54 55.1
  Extent = 7.5 (6.1-9.4)", rotation angle = 0
  Source counts = 137.7 +/- 27.6
  Background counts = 624.9
  Rate = 0.007 +/- 0.001
[Sun Apr  1 12:53:23 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 12:53:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 12:53:23 2012] Assessing source extent using major axis lower bound
[Sun Apr  1 12:53:23 2012] Source does appear to be extended
[Sun Apr  1 12:53:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 12:53:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr  1 12:53:47 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Sun Apr  1 12:53:47 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sun Apr  1 12:53:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.52"
[Sun Apr  1 13:42:51 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Apr  1 13:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_src1.csv
[Sun Apr  1 13:42:51 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Apr  1 13:42:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_src1.csv
[Sun Apr  1 13:42:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr  1 13:42:52 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Apr  1 13:42:52 2012] fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Apr  1 13:42:52 2012] Fit fullrun_pn_xmm0202370201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Apr  1 14:50:06 2012] Spatial fit model total counts = 450.997000, observed total counts = 451.000000
[Sun Apr  1 14:50:06 2012] Offset between fit and detection position for source 1 = 0.124294 pixels
[Sun Apr  1 14:50:06 2012] 451.235000 total counts/ 323.227000 bgd. counts: snr = 7.120054
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.124294 pixels
  Position = (144.1, 226.3) = 13 23 47.02 -67 54 54.6
  Extent = 7.1 (5.7-9.0)", rotation angle = 0
  Source counts = 128.0 +/- 21.2
  Background counts = 323.2
  Rate = 0.007 +/- 0.001
[Sun Apr  1 14:50:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr  1 14:50:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr  1 14:50:06 2012] Assessing source extent using major axis lower bound
[Sun Apr  1 14:50:06 2012] Source does appear to be extended
[Sun Apr  1 14:50:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr  1 14:50:29 2012] XMMSAS src. selection expression = ellipse(12484.306940, 19643.736800, 424.105812, 424.105812, 0.000000, X, Y)
[Sun Apr  1 14:50:29 2012] Writing source region out to fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1_src.reg
[Sun Apr  1 14:50:29 2012] Extracting stamp from image fullrun_pn_xmm0202370201_pi300-10000_cl_sm2.00.img.gz, (120, 202) - (168, 251)
[Sun Apr  1 14:50:29 2012] XMMSAS bgd. selection expression = annulus(12484.306940, 19643.736800, 706.843020, 1413.686041, X, Y)
[Sun Apr  1 14:50:29 2012] Writing fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1.gif
[Sun Apr  1 14:50:37 2012] Mean detx,y = (-15884.12, 1785.01) 
[Sun Apr  1 14:50:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Apr  1 14:51:00 2012] Binned source spectrum to 10 counts/bin
[Sun Apr  1 14:51:01 2012] Setting source spectrum file to fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Apr  1 14:51:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Apr  1 16:05:52 2012] Updating aperture counts using extracted products
[Sun Apr  1 16:05:52 2012] Error reading totcts from fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Apr  1 16:05:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 16:05:54 2012] Using photon index=1.80, rate=0.00674, arf fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1.arf
[Sun Apr  1 16:05:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 16:05:54 2012] Updating source flux to 6.3e-14
[Sun Apr  1 16:08:12 2012] Reading fit data from xmm0202370201/analysis//spectral/fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Apr  1 16:08:12 2012] Spectral fit parameter nH value = 1.20503e+22
[Sun Apr  1 16:08:12 2012] Spectral fit parameter PhoIndex value = 9.49998
[Sun Apr  1 16:08:12 2012] Failed to get F(0.3-8.0) from xmm0202370201/analysis//spectral/fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Apr  1 16:08:12 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr  1 16:08:12 2012] Using Nh = 1.2e+22, photon index=9.50, rate=0.00674, arf fullrun_pn_xmm0202370201_pi300-10000_pass1_cl_src1.arf
[Sun Apr  1 16:08:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Apr  1 16:08:13 2012] Updating source flux to 3.6e-14