[Mon Jan 23 01:11:54 2012] Detection parameters:
  Position = (263.4, 288.3) = 0 42 44.28 41 16 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3676.2 +/- 78.2
  Background counts = 202.3
  Rate = 0.2 +/- 0.004

[Mon Jan 23 01:11:55 2012] Off-axis axis estimate = 2.65'
[Mon Jan 23 01:15:06 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:15:06 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Jan 23 01:15:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.104
[Mon Jan 23 01:15:06 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.75"
[Mon Jan 23 03:29:27 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jan 23 03:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_src33.csv
[Mon Jan 23 03:29:27 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jan 23 03:29:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_src33.csv
[Mon Jan 23 03:29:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 03:29:28 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jan 23 03:29:28 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jan 23 03:29:28 2012] Fit fullrun_pn_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Jan 23 09:21:42 2012] Spatial fit model total counts = 8361.710000, observed total counts = 8346.000000
[Mon Jan 23 09:21:42 2012] Offset between fit and detection position for source 37 = 0.353736 pixels
[Mon Jan 23 09:21:42 2012] 7325.310000 total counts/ 6062.530000 bgd. counts: snr = 16.218129
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.353736 pixels
  Position = (263.5, 288.0) = 0 42 44.23 41 16 7.4
  Extent = 6.4 (6.1-7.0)", rotation angle = 0
  Source counts = 1262.8 +/- 85.6
  Background counts = 6062.5
  Rate = 0.1 +/- 0.009
[Mon Jan 23 09:21:42 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:21:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:21:42 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 09:21:42 2012] Source does appear to be extended
[Mon Jan 23 09:21:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 09:21:42 2012] Source is confused with source 42
[Mon Jan 23 09:22:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 09:22:19 2012] Initial guess for spatial extent in simple fitting = 6.43"
[Mon Jan 23 09:22:19 2012] source mask rpix=1.5, npix_max = 15, mask sum = 15, frac = 0.958
[Mon Jan 23 09:22:19 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 6.43"
[Mon Jan 23 12:30:26 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_src31.ximg exists
[Mon Jan 23 12:30:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_src31.csv
[Mon Jan 23 12:30:26 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon Jan 23 12:30:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_src31.csv
[Mon Jan 23 12:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:30:27 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon Jan 23 12:30:28 2012] fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Jan 23 12:30:28 2012] Fit fullrun_pn_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Mon Jan 23 20:11:36 2012] Warning, spatial fit 31 centroid is now closest to src. 42
[Mon Jan 23 20:11:36 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 20:11:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 20:11:36 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 20:11:36 2012] Source does appear to be extended
[Mon Jan 23 20:11:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 20:12:30 2012] Counts = 1262.780000, rescaling region sizes by 2.000000
[Mon Jan 23 20:12:30 2012] XMMSAS src. selection expression = ellipse(22879.152600, 25004.960600, 771.747622, 771.747622, 0.000000, X, Y)
[Mon Jan 23 20:12:30 2012] Writing source region out to fullrun_pn_xmm0202230501_pi300-10000_pass1_cl_src37_src.reg
[Mon Jan 23 20:12:30 2012] Extracting stamp from image fullrun_pn_xmm0202230501_pi300-10000_cl_sm2.00.img.gz, (219, 244) - (308, 332)
[Mon Jan 23 20:12:30 2012] XMMSAS bgd. selection expression = annulus(22879.152600, 25004.960600, 2572.492074, 5144.984148, X, Y) && !ellipse(24182.869800, 24893.360200, 1320.945638, 1320.945638, 0.000000, X, Y) && !ellipse(17687.659897, 30063.196167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.107800, 29726.755800, 368.729611, 368.729611, 0.000000, X, Y) && !ellipse(25834.550800, 29184.572600, 423.756012, 423.756012, 0.000000, X, Y) && !ellipse(27007.461080, 28716.936000, 406.657612, 406.657612, 0.000000, X, Y) && !ellipse(19447.823517, 28820.076935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21041.413400, 28310.040200, 445.356813, 445.356813, 0.000000, X, Y) && !ellipse(18487.668320, 27316.095400, 459.028013, 459.028013, 0.000000, X, Y) && !ellipse(21890.369848, 26815.970725, 437.894503, 276.096890, 89.973265, X, Y) && !ellipse(20519.626000, 26493.646000, 923.712027, 923.712027, 0.000000, X, Y) && !ellipse(20426.988000, 26835.850000, 2305.248066, 2305.248066, 0.000000, X, Y) && !ellipse(21673.244000, 25752.136000, 1274.512037, 1274.512037, 0.000000, X, Y) && !ellipse(23462.754800, 25543.498200, 351.474410, 351.474410, 0.000000, X, Y) && !ellipse(22188.550000, 25380.714000, 744.213621, 744.213621, 0.000000, X, Y) && !ellipse(24721.150000, 24974.328000, 1094.704031, 1094.704031, 0.000000, X, Y) && !ellipse(18432.609344, 24824.820709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28035.364000, 24758.306000, 322.734409, 322.734409, 0.000000, X, Y) && !ellipse(25861.463160, 25252.698800, 440.656813, 440.656813, 0.000000, X, Y) && !ellipse(23197.240000, 24860.974000, 670.507219, 670.507219, 0.000000, X, Y) && !ellipse(19380.903000, 24949.008400, 424.551212, 415.516012, 87.207000, X, Y) && !ellipse(22702.037170, 24151.770782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21037.507200, 24427.617600, 392.572011, 392.572011, 0.000000, X, Y) && !ellipse(19758.748688, 24238.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27708.524000, 24326.568000, 354.549610, 354.549610, 0.000000, X, Y) && !ellipse(23338.112720, 23353.925000, 463.195213, 463.195213, 0.000000, X, Y) && !ellipse(18653.678660, 24136.894600, 507.564015, 404.840012, 59.799000, X, Y) && !ellipse(16959.093307, 23455.712372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.622528, 23007.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23352.412000, 23348.924000, 389.841611, 389.841611, 0.000000, X, Y) && !ellipse(21964.943860, 24080.180600, 516.288815, 516.288815, 0.000000, X, Y) && !ellipse(27649.931183, 22590.377258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22696.220001, 22568.247589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.644000, 21842.389600, 355.276010, 176.548005, 23.866000, X, Y) && !ellipse(17392.998108, 21001.104599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28859.655457, 20597.419342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26500.178560, 20491.785800, 438.236813, 438.236813, 0.000000, X, Y) && !ellipse(22770.441345, 19599.292938, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan 23 20:12:30 2012] Writing fullrun_pn_xmm0202230501_pi300-10000_pass1_cl_src37.gif
[Mon Jan 23 20:50:04 2012] Mean detx,y = (1202.26, -570.03) 
[Mon Jan 23 20:50:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 23 20:51:23 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 23 20:51:24 2012] Setting source spectrum file to fullrun_pn_xmm0202230501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Mon Jan 23 20:51:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202230501_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jan 24 06:31:13 2012] Updating aperture counts using extracted products
[Tue Jan 24 06:31:13 2012] Error reading totcts from fullrun_pn_xmm0202230501_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jan 24 06:31:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 06:31:15 2012] Using photon index=1.80, rate=0.14, arf fullrun_pn_xmm0202230501_pi300-10000_pass1_cl_src37.arf
[Tue Jan 24 06:31:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 06:31:15 2012] Updating source flux to 3.6e-13
[Tue Jan 24 06:40:13 2012] Flag c found in src. 37 procflags, skipping spectral fitting