[Mon Jan 23 01:12:50 2012] Detection parameters:
  Position = (426.4, 331.8) = 0 41 41.36 41 19 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.2 +/- 15.9
  Background counts = 70.8
  Rate = 0.003 +/- 0.0006

[Mon Jan 23 01:12:50 2012] Off-axis axis estimate = 9.58'
[Mon Jan 23 06:27:15 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:27:15 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Mon Jan 23 06:27:15 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Mon Jan 23 06:27:15 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 11.22"
[Mon Jan 23 09:21:29 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src78.ximg exists
[Mon Jan 23 09:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src78.csv
[Mon Jan 23 09:21:29 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src78_1.ximg exists
[Mon Jan 23 09:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src78.csv
[Mon Jan 23 09:21:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 09:21:30 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Mon Jan 23 09:21:30 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Mon Jan 23 09:21:30 2012] Fit fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Mon Jan 23 09:22:01 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 14.042010 pixels away
[Mon Jan 23 09:22:01 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:22:01 2012] Assessing source extent using major
[Mon Jan 23 09:22:01 2012] Source does appear to be extended
[Mon Jan 23 09:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 15:54:27 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:54:27 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Mon Jan 23 15:54:27 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.949
[Mon Jan 23 15:54:27 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 11.22"
[Mon Jan 23 20:11:19 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass1_src71.ximg exists
[Mon Jan 23 20:11:19 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass1_src71_1.ximg exists
[Mon Jan 23 20:11:19 2012] Fit fullrun_mos2_xmm0202230501_pi300-10000_cl_pass1_src71 appears to have run properly
[Mon Jan 23 20:11:20 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Mon Jan 23 20:11:20 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Mon Jan 23 20:11:20 2012] Fit fullrun_mos2_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Mon Jan 23 20:12:09 2012] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 14.022809 pixels away
[Mon Jan 23 20:12:09 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 20:12:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 20:12:09 2012] Assessing source extent using major
[Mon Jan 23 20:12:09 2012] Source does appear to be extended
[Mon Jan 23 20:12:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 03:04:50 2012] XMMSAS src. selection expression = ellipse(37044.486847, 28818.587463, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 03:04:50 2012] Writing source region out to fullrun_mos2_xmm0202230501_pi300-10000_pass1_cl_src63_src.reg
[Tue Jan 24 03:04:50 2012] Extracting stamp from image fullrun_mos2_xmm0202230501_pi300-10000_cl_sm2.00.img.gz, (389, 294) - (464, 369)
[Tue Jan 24 03:04:50 2012] XMMSAS bgd. selection expression = annulus(37044.486847, 28818.587463, 1087.500000, 2175.000000, X, Y)
[Tue Jan 24 03:04:50 2012] Writing fullrun_mos2_xmm0202230501_pi300-10000_pass1_cl_src63.gif
[Tue Jan 24 03:31:07 2012] Mean detx,y = (9706.42, -9370.24) 
[Tue Jan 24 03:31:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 03:31:16 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 03:31:16 2012] Setting source spectrum file to fullrun_mos2_xmm0202230501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Jan 24 03:31:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202230501_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Tue Jan 24 06:30:27 2012] Not generating rmf since there are only 86 counts
[Tue Jan 24 06:30:27 2012] rmf not generated due to insufficient counts
[Tue Jan 24 06:31:19 2012] Updating aperture counts using extracted products
[Tue Jan 24 06:31:19 2012] Error reading totcts from fullrun_mos2_xmm0202230501_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Jan 24 06:31:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 06:31:20 2012] Using photon index=1.80, rate=0.00326, arf fullrun_mos2_xmm0202230501_pi300-10000_pass1_cl_src63.arf
[Tue Jan 24 06:31:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 06:31:20 2012] Updating source flux to 7.6e-14
[Tue Jan 24 06:35:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting