[Mon Jan 23 01:12:49 2012] Detection parameters:
  Position = (276.1, 265.0) = 0 42 39.38 41 14 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.2 +/- 26.8
  Background counts = 139.1
  Rate = 0.01 +/- 0.001

[Mon Jan 23 01:12:50 2012] Off-axis axis estimate = 2.92'
[Mon Jan 23 06:27:15 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:27:15 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Mon Jan 23 06:27:15 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.748
[Mon Jan 23 06:27:15 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.89"
[Mon Jan 23 09:21:29 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jan 23 09:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src49.csv
[Mon Jan 23 09:21:29 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jan 23 09:21:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src49.csv
[Mon Jan 23 09:21:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 09:21:30 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jan 23 09:21:30 2012] fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jan 23 09:21:30 2012] Fit fullrun_mos2_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon Jan 23 09:22:01 2012] Spatial fit model total counts = 1094.040000, observed total counts = 1093.000000
[Mon Jan 23 09:22:01 2012] Offset between fit and detection position for source 56 = 0.449153 pixels
[Mon Jan 23 09:22:01 2012] Warning, changing simple spatial fit ID from 49 to 38
[Mon Jan 23 09:22:01 2012] 1117.313400 total counts/ 1080.330000 bgd. counts: snr = 1.125197
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.449153 pixels
  Position = (276.2, 264.5) = 0 42 39.33 41 14 25.6
  Extent = 3.1 (2.0-4.7)" x 2.9 (2.8-2.9)", rotation angle = 90 (90-90) degrees
  Source counts = 37.0 +/- 33.4
  Background counts = 1080.3
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability