[Mon Jan 23 01:12:22 2012] Detection parameters:
  Position = (347.1, 313.1) = 0 42 11.96 41 17 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.2 +/- 21.7
  Background counts = 100.4
  Rate = 0.009 +/- 0.001

[Mon Jan 23 01:12:23 2012] Off-axis axis estimate = 3.69'
[Mon Jan 23 03:29:28 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 03:29:28 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Mon Jan 23 03:29:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.084
[Mon Jan 23 03:29:28 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.27"
[Mon Jan 23 06:27:13 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jan 23 06:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src55.csv
[Mon Jan 23 06:27:13 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jan 23 06:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src55.csv
[Mon Jan 23 06:27:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jan 23 06:27:14 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Jan 23 09:21:52 2012] Spatial fit model total counts = 559.322000, observed total counts = 644.000000
[Mon Jan 23 09:21:52 2012] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jan 23 09:21:52 2012] Source 61 is offset by 2.577521 and -8.441802 pixels which is larger than
2 X fitted extent = 2.511324 x 2.511324, not incorporating fit results
[Mon Jan 23 09:21:52 2012] Source 61 is offset by 2.656808 and -8.911043 pixels which is larger than
2 X fitted extent = 2.280837 x 2.280837, not incorporating fit results
[Mon Jan 23 09:21:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:21:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:21:52 2012] Assessing source extent using major
[Mon Jan 23 09:21:52 2012] Source does appear to be extended
[Mon Jan 23 09:21:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 12:30:28 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:30:28 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Mon Jan 23 12:30:28 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.084
[Mon Jan 23 12:30:28 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 8.27"
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src53.ximg exists
[Mon Jan 23 15:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src53.csv
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src53_1.ximg exists
[Mon Jan 23 15:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src53.csv
[Mon Jan 23 15:54:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Mon Jan 23 15:54:26 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Mon Jan 23 20:11:54 2012] Spatial fit model total counts = 500.087000, observed total counts = 644.000000
[Mon Jan 23 20:11:54 2012] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jan 23 20:11:54 2012] Source 61 is offset by 2.594003 and -8.473641 pixels which is larger than
2 X fitted extent = 2.544055 x 2.544055, not incorporating fit results
[Mon Jan 23 20:11:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 20:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 20:11:55 2012] Assessing source extent using major
[Mon Jan 23 20:11:55 2012] Source does appear to be extended
[Mon Jan 23 20:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:25:45 2012] XMMSAS src. selection expression = ellipse(30151.842285, 27194.081238, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing source region out to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src61_src.reg
[Tue Jan 24 00:25:45 2012] Extracting stamp from image fullrun_mos1_xmm0202230501_pi300-10000_cl_sm2.00.img.gz, (310, 276) - (385, 351)
[Tue Jan 24 00:25:45 2012] XMMSAS bgd. selection expression = annulus(30151.842285, 27194.081238, 1087.500000, 2175.000000, X, Y) && !ellipse(31141.130400, 27522.252800, 479.196814, 345.280810, 73.601200, X, Y) && !ellipse(29909.977000, 27943.725200, 431.515212, 364.881610, 37.779600, X, Y) && !ellipse(28036.445038, 24834.960266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29332.578572, 26440.878068, 385.382600, 322.096181, 339.557317, X, Y) && !ellipse(30755.853485, 26927.484436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.241058, 27237.735229, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src61.gif
[Tue Jan 24 00:51:29 2012] Mean detx,y = (-4549.71, -4509.12) 
[Tue Jan 24 00:51:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 00:51:48 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 00:51:48 2012] Setting source spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Jan 24 00:51:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Tue Jan 24 03:00:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 03:00:04 2012] rmf not generated due to insufficient counts
[Tue Jan 24 06:31:16 2012] Updating aperture counts using extracted products
[Tue Jan 24 06:31:16 2012] Error reading totcts from fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Tue Jan 24 06:31:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 06:31:18 2012] Using photon index=1.80, rate=0.00949, arf fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src61.arf
[Tue Jan 24 06:31:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 06:31:18 2012] Updating source flux to 1.3e-13
[Tue Jan 24 06:31:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting