[Mon Jan 23 01:12:22 2012] Detection parameters:
  Position = (150.2, 320.7) = 0 43 27.97 41 18 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.1 +/- 22.9
  Background counts = 91.2
  Rate = 0.02 +/- 0.001

[Mon Jan 23 01:12:23 2012] Off-axis axis estimate = 10.86'
[Mon Jan 23 03:29:28 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 03:29:28 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Mon Jan 23 03:29:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 40, frac = 0.961
[Mon Jan 23 03:29:28 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 11.86"
[Mon Jan 23 06:27:13 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src43.ximg exists
[Mon Jan 23 06:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src43.csv
[Mon Jan 23 06:27:13 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon Jan 23 06:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src43.csv
[Mon Jan 23 06:27:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon Jan 23 06:27:14 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Mon Jan 23 09:21:52 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 14.407749 pixels away
[Mon Jan 23 09:21:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:21:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:21:52 2012] Assessing source extent using major
[Mon Jan 23 09:21:52 2012] Source does appear to be extended
[Mon Jan 23 09:21:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 12:30:28 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:30:28 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Mon Jan 23 12:30:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 40, frac = 0.961
[Mon Jan 23 12:30:28 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 11.86"
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src42.ximg exists
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon Jan 23 15:54:25 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src42 appears to have run properly
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon Jan 23 15:54:26 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Mon Jan 23 20:11:54 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 15.387187 pixels away
[Mon Jan 23 20:11:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 20:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 20:11:55 2012] Assessing source extent using major
[Mon Jan 23 20:11:55 2012] Source does appear to be extended
[Mon Jan 23 20:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:25:45 2012] XMMSAS src. selection expression = ellipse(13022.964584, 27852.379822, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing source region out to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src44_src.reg
[Tue Jan 24 00:25:45 2012] Extracting stamp from image fullrun_mos1_xmm0202230501_pi300-10000_cl_sm2.00.img.gz, (113, 283) - (188, 358)
[Tue Jan 24 00:25:45 2012] XMMSAS bgd. selection expression = annulus(13022.964584, 27852.379822, 1087.500000, 2175.000000, X, Y) && !ellipse(14580.582657, 27039.441711, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src44.gif
[Tue Jan 24 00:48:12 2012] Mean detx,y = (2794.55, 10962.43) 
[Tue Jan 24 00:48:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 00:48:23 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 00:48:23 2012] Setting source spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jan 24 00:48:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Jan 24 02:52:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 02:52:41 2012] rmf not generated due to insufficient counts
[Tue Jan 24 06:31:16 2012] Updating aperture counts using extracted products
[Tue Jan 24 06:31:16 2012] Error reading totcts from fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jan 24 06:31:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 06:31:17 2012] Using photon index=1.80, rate=0.0153, arf fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src44.arf
[Tue Jan 24 06:31:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 06:31:17 2012] Updating source flux to 2.6e-13
[Tue Jan 24 06:31:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting