[Mon Jan 23 01:12:22 2012] Detection parameters:
  Position = (322.8, 286.0) = 0 42 21.35 41 15 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 715.7 +/- 37.1
  Background counts = 125.1
  Rate = 0.03 +/- 0.002

[Mon Jan 23 01:12:23 2012] Off-axis axis estimate = 1.98'
[Mon Jan 23 03:29:28 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 03:29:28 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Mon Jan 23 03:29:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Mon Jan 23 03:29:28 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.42"
[Mon Jan 23 06:27:12 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src31.ximg exists
[Mon Jan 23 06:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src31.csv
[Mon Jan 23 06:27:12 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Jan 23 06:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src31.csv
[Mon Jan 23 06:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Jan 23 06:27:14 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Jan 23 09:21:52 2012] Source 21 is offset by -3.013942 and -1.812618 pixels which is larger than
2 X fitted extent = 0.853678 x 0.853678, not incorporating fit results
[Mon Jan 23 09:21:52 2012] Warning, spatial fit 31 centroid is now closest to src. 7
[Mon Jan 23 09:21:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:21:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:21:52 2012] Assessing source extent using major
[Mon Jan 23 09:21:52 2012] Source does appear to be extended
[Mon Jan 23 09:21:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 09:21:52 2012] Source is confused with source 7
[Mon Jan 23 12:30:28 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:30:28 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Mon Jan 23 12:30:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Mon Jan 23 12:30:28 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.42"
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src31.ximg exists
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon Jan 23 15:54:25 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src31 appears to have run properly
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Jan 23 15:54:26 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Mon Jan 23 20:11:54 2012] Source 21 is offset by 3.832954 and 5.772095 pixels which is larger than
2 X fitted extent = 1.914037 x 1.914037, not incorporating fit results
[Mon Jan 23 20:11:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 20:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 20:11:55 2012] Assessing source extent using major
[Mon Jan 23 20:11:55 2012] Source does appear to be extended
[Mon Jan 23 20:11:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:25:45 2012] XMMSAS src. selection expression = ellipse(28036.445038, 24834.960266, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing source region out to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src21_src.reg
[Tue Jan 24 00:25:45 2012] Extracting stamp from image fullrun_mos1_xmm0202230501_pi300-10000_cl_sm2.00.img.gz, (285, 249) - (360, 324)
[Tue Jan 24 00:25:45 2012] XMMSAS bgd. selection expression = annulus(28036.445038, 24834.960266, 1087.500000, 2175.000000, X, Y) && !ellipse(27701.146120, 24329.608600, 354.298410, 354.298410, 0.000000, X, Y) && !ellipse(25858.009225, 25253.864723, 343.306148, 337.937871, 352.262376, X, Y) && !ellipse(28676.028740, 22470.333400, 424.499212, 424.499212, 0.000000, X, Y) && !ellipse(29332.578572, 26440.878068, 385.382600, 322.096181, 339.557317, X, Y) && !ellipse(25209.260986, 25179.405182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30755.853485, 26927.484436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30151.842285, 27194.081238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27675.607971, 22558.046967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27188.229553, 21985.906738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.241058, 27237.735229, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src21.gif
[Tue Jan 24 00:44:45 2012] Mean detx,y = (-1128.13, -3701.70) 
[Tue Jan 24 00:44:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 00:44:55 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 00:44:55 2012] Setting source spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jan 24 00:44:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jan 24 02:23:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 02:23:44 2012] rmf not generated due to insufficient counts
[Tue Jan 24 06:31:16 2012] Updating aperture counts using extracted products
[Tue Jan 24 06:31:16 2012] Error reading totcts from fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jan 24 06:31:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 06:31:17 2012] Using photon index=1.80, rate=0.0324, arf fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src21.arf
[Tue Jan 24 06:31:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 06:31:17 2012] Updating source flux to 3.8e-13
[Tue Jan 24 06:31:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting