[Mon Jan 23 01:12:22 2012] Detection parameters:
  Position = (213.1, 314.9) = 0 43 3.69 41 18 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 792.5 +/- 37.3
  Background counts = 131.2
  Rate = 0.04 +/- 0.002

[Mon Jan 23 01:12:23 2012] Off-axis axis estimate = 6.30'
[Mon Jan 23 03:29:28 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 03:29:28 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Mon Jan 23 03:29:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 35, frac = 1.199
[Mon Jan 23 03:29:28 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.58"
[Mon Jan 23 06:27:12 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jan 23 06:27:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src30.csv
[Mon Jan 23 06:27:12 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jan 23 06:27:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src30.csv
[Mon Jan 23 06:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jan 23 06:27:14 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jan 23 06:27:14 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Jan 23 09:21:52 2012] Spatial fit model total counts = 487.998000, observed total counts = 488.000000
[Mon Jan 23 09:21:52 2012] Offset between fit and detection position for source 19 = 0.048935 pixels
[Mon Jan 23 09:21:52 2012] 491.451000 total counts/ 214.288000 bgd. counts: snr = 18.933736
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.048935 pixels
  Position = (213.2, 314.8) = 0 43 3.67 41 18 4.1
  Extent = 5.0 (4.5-5.6)", rotation angle = 0
  Source counts = 277.2 +/- 22.2
  Background counts = 214.3
  Rate = 0.02 +/- 0.002
[Mon Jan 23 09:21:52 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 09:21:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 09:21:52 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 09:21:52 2012] Source does appear to be extended
[Mon Jan 23 09:21:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 12:30:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:30:28 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Mon Jan 23 12:30:28 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.830
[Mon Jan 23 12:30:28 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 4.99"
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src30.ximg exists
[Mon Jan 23 15:54:25 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon Jan 23 15:54:25 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_src30 appears to have run properly
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon Jan 23 15:54:26 2012] fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon Jan 23 15:54:26 2012] Fit fullrun_mos1_xmm0202230501_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Mon Jan 23 20:11:54 2012] Spatial fit model total counts = 488.789000, observed total counts = 488.000000
[Mon Jan 23 20:11:54 2012] Offset between fit and detection position for source 19 = 0.007580 pixels
[Mon Jan 23 20:11:54 2012] 492.103000 total counts/ 210.637000 bgd. counts: snr = 19.393608
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.007580 pixels
  Position = (213.2, 314.8) = 0 43 3.67 41 18 4.1
  Extent = 5.4 (4.6-6.2)" x 4.8 (4.2-5.3)", rotation angle = 82 (67-90) degrees
  Source counts = 281.5 +/- 22.2
  Background counts = 210.6
  Rate = 0.02 +/- 0.002
[Mon Jan 23 20:11:55 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 20:11:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 20:11:55 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 20:11:55 2012] Source does appear to be extended
[Mon Jan 23 20:11:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.87
[Tue Jan 24 00:25:45 2012] XMMSAS src. selection expression = ellipse(18498.056040, 27342.608600, 321.315009, 288.674408, 82.403000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing source region out to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src19_src.reg
[Tue Jan 24 00:25:45 2012] Extracting stamp from image fullrun_mos1_xmm0202230501_pi300-10000_cl_sm2.00.img.gz, (195, 296) - (232, 333)
[Tue Jan 24 00:25:45 2012] XMMSAS bgd. selection expression = annulus(18498.056040, 27342.608600, 535.525015, 1071.050031, X, Y) && !ellipse(19435.503400, 28819.403600, 412.290412, 412.290412, 0.000000, X, Y) && !ellipse(19746.166000, 27538.932000, 1419.568041, 1419.568041, 0.000000, X, Y)
[Tue Jan 24 00:25:45 2012] Writing fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src19.gif
[Tue Jan 24 00:44:21 2012] Mean detx,y = (721.01, 5877.88) 
[Tue Jan 24 00:44:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 00:44:42 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 00:44:42 2012] Setting source spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Jan 24 00:44:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Jan 24 06:31:16 2012] Updating aperture counts using extracted products
[Tue Jan 24 06:31:16 2012] Error reading totcts from fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Jan 24 06:31:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 06:31:17 2012] Using photon index=1.80, rate=0.021, arf fullrun_mos1_xmm0202230501_pi300-10000_pass1_cl_src19.arf
[Tue Jan 24 06:31:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 06:31:17 2012] Updating source flux to 3.2e-13