[Mon Jan 23 01:42:07 2012] Detection parameters:
  Position = (338.1, 348.9) = 0 42 15.46 41 20 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.1 +/- 11.8
  Background counts = 9.5
  Rate = 0.007 +/- 0.0009

[Mon Jan 23 01:42:07 2012] Off-axis axis estimate = 4.66'
[Mon Jan 23 07:15:44 2012] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:15:44 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Mon Jan 23 07:15:44 2012] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.752
[Mon Jan 23 07:15:44 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 8.76"
[Mon Jan 23 10:13:18 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_src62.ximg exists
[Mon Jan 23 10:13:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_src62.csv
[Mon Jan 23 10:13:18 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon Jan 23 10:13:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_src62.csv
[Mon Jan 23 10:13:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 10:13:19 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon Jan 23 10:13:19 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon Jan 23 10:13:19 2012] Fit fullrun_mos2_xmm0202230401_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Mon Jan 23 10:14:16 2012] Spatial fit model total counts = 144.000000, observed total counts = 144.000000
[Mon Jan 23 10:14:16 2012] Offset between fit and detection position for source 62 = 0.343800 pixels
[Mon Jan 23 10:14:16 2012] 146.802900 total counts/ 76.404100 bgd. counts: snr = 8.053913
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.343800 pixels
  Position = (338.3, 348.6) = 0 42 15.40 41 20 31.9
  Extent = 5.6 (4.5-6.6)", rotation angle = 0
  Source counts = 70.4 +/- 12.1
  Background counts = 76.4
  Rate = 0.003 +/- 0.0006
[Mon Jan 23 10:14:16 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 10:14:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 10:14:16 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 10:14:16 2012] Source does appear to be extended
[Mon Jan 23 10:14:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 18:31:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 18:31:06 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Mon Jan 23 18:31:06 2012] source mask rpix=1.3, npix_max = 12, mask sum = 8, frac = 0.619
[Mon Jan 23 18:31:06 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 5.65"
[Mon Jan 23 21:59:46 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_src62.ximg exists
[Mon Jan 23 21:59:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_src62.csv
[Mon Jan 23 21:59:46 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_src62_1.ximg exists
[Mon Jan 23 21:59:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_src62.csv
[Mon Jan 23 21:59:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 21:59:48 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Mon Jan 23 21:59:48 2012] fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Mon Jan 23 21:59:48 2012] Fit fullrun_mos2_xmm0202230401_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Mon Jan 23 22:00:37 2012] Warning, spatial fit 62 centroid is now closest to src. 46
[Mon Jan 23 22:00:37 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 22:00:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 22:00:37 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 22:00:37 2012] Source does appear to be extended
[Mon Jan 23 22:00:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 06:54:52 2012] XMMSAS src. selection expression = ellipse(29384.515400, 30283.096600, 338.731499, 338.731499, 0.000000, X, Y)
[Tue Jan 24 06:54:52 2012] Writing source region out to fullrun_mos2_xmm0202230401_pi300-10000_pass1_cl_src62_src.reg
[Tue Jan 24 06:54:52 2012] Extracting stamp from image fullrun_mos2_xmm0202230401_pi300-10000_cl_sm2.00.img.gz, (319, 329) - (358, 368)
[Tue Jan 24 06:54:52 2012] XMMSAS bgd. selection expression = annulus(29384.515400, 30283.096600, 564.552499, 1129.104997, X, Y)
[Tue Jan 24 06:54:52 2012] Writing fullrun_mos2_xmm0202230401_pi300-10000_pass1_cl_src62.gif
[Tue Jan 24 07:10:07 2012] Mean detx,y = (2262.93, -7107.56) 
[Tue Jan 24 07:10:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 07:10:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 07:10:19 2012] Setting source spectrum file to fullrun_mos2_xmm0202230401_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Jan 24 07:10:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202230401_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Tue Jan 24 09:49:12 2012] Not generating rmf since there are only 70 counts
[Tue Jan 24 09:49:12 2012] rmf not generated due to insufficient counts
[Tue Jan 24 10:00:48 2012] Updating aperture counts using extracted products
[Tue Jan 24 10:00:48 2012] Error reading totcts from fullrun_mos2_xmm0202230401_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Jan 24 10:00:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 10:00:52 2012] Using photon index=1.80, rate=0.00326, arf fullrun_mos2_xmm0202230401_pi300-10000_pass1_cl_src62.arf
[Tue Jan 24 10:00:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 10:00:52 2012] Updating source flux to 5.4e-14
[Tue Jan 24 10:10:05 2012] Source 62 has fewer than 100.000000 counts, skipping spectral fitting