[Mon Jan 23 01:41:36 2012] Detection parameters:
  Position = (301.6, 465.9) = 0 42 29.56 41 29 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 10.7
  Background counts = 6.3
  Rate = 0.003 +/- 0.0005

[Mon Jan 23 01:41:37 2012] Off-axis axis estimate = 12.14'
[Mon Jan 23 04:36:57 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 04:36:57 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Mon Jan 23 04:36:57 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.077
[Mon Jan 23 04:36:57 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 12.50"
[Mon Jan 23 07:15:43 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_src79.ximg exists
[Mon Jan 23 07:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_src79.csv
[Mon Jan 23 07:15:43 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_src79_1.ximg exists
[Mon Jan 23 07:15:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_src79.csv
[Mon Jan 23 07:15:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:15:44 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Mon Jan 23 07:15:44 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Mon Jan 23 07:15:44 2012] Fit fullrun_mos1_xmm0202230401_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Mon Jan 23 10:13:57 2012] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 15.702973 pixels away
[Mon Jan 23 10:13:58 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 10:13:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 10:13:58 2012] Assessing source extent using major
[Mon Jan 23 10:13:58 2012] Source does appear to be extended
[Mon Jan 23 10:13:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 14:55:27 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 14:55:27 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Mon Jan 23 14:55:27 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.077
[Mon Jan 23 14:55:27 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 12.50"
[Mon Jan 23 18:31:05 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_src74.ximg exists
[Mon Jan 23 18:31:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_src74.csv
[Mon Jan 23 18:31:05 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_src74_1.ximg exists
[Mon Jan 23 18:31:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_src74.csv
[Mon Jan 23 18:31:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 18:31:06 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Mon Jan 23 18:31:06 2012] fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Mon Jan 23 18:31:06 2012] Fit fullrun_mos1_xmm0202230401_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Mon Jan 23 22:00:22 2012] Spatial fit model total counts = 120.998000, observed total counts = 121.000000
[Mon Jan 23 22:00:22 2012] Offset between fit and detection position for source 41 = 0.130962 pixels
[Mon Jan 23 22:00:22 2012] 121.051800 total counts/ 70.680900 bgd. counts: snr = 5.991405
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.130962 pixels
  Position = (301.5, 465.8) = 0 42 29.60 41 29 1.5
  Extent = 6.0 (3.9-7.7)", rotation angle = 0
  Source counts = 50.4 +/- 11.0
  Background counts = 70.7
  Rate = 0.002 +/- 0.0005
[Mon Jan 23 22:00:22 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 22:00:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 22:00:22 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 22:00:22 2012] Source does appear to be extended
[Mon Jan 23 22:00:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 03:42:39 2012] XMMSAS src. selection expression = ellipse(26186.123620, 40474.260600, 359.140210, 359.140210, 0.000000, X, Y)
[Tue Jan 24 03:42:39 2012] Writing source region out to fullrun_mos1_xmm0202230401_pi300-10000_pass1_cl_src41_src.reg
[Tue Jan 24 03:42:39 2012] Extracting stamp from image fullrun_mos1_xmm0202230401_pi300-10000_cl_sm2.00.img.gz, (281, 445) - (322, 486)
[Tue Jan 24 03:42:39 2012] XMMSAS bgd. selection expression = annulus(26186.123620, 40474.260600, 598.567017, 1197.134034, X, Y)
[Tue Jan 24 03:42:39 2012] Writing fullrun_mos1_xmm0202230401_pi300-10000_pass1_cl_src41.gif
[Tue Jan 24 04:14:44 2012] Mean detx,y = (-14459.00, 5078.95) 
[Tue Jan 24 04:14:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 04:14:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 04:14:53 2012] Setting source spectrum file to fullrun_mos1_xmm0202230401_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Jan 24 04:14:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202230401_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Tue Jan 24 06:54:46 2012] Not generating rmf since there are only 50 counts
[Tue Jan 24 06:54:46 2012] rmf not generated due to insufficient counts
[Tue Jan 24 10:00:39 2012] Updating aperture counts using extracted products
[Tue Jan 24 10:00:39 2012] Error reading totcts from fullrun_mos1_xmm0202230401_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Jan 24 10:00:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 10:00:42 2012] Using photon index=1.80, rate=0.00233, arf fullrun_mos1_xmm0202230401_pi300-10000_pass1_cl_src41.arf
[Tue Jan 24 10:00:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 10:00:42 2012] Updating source flux to 7e-14
[Tue Jan 24 10:00:57 2012] Source 41 has fewer than 100.000000 counts, skipping spectral fitting