[Mon Jan 23 01:15:42 2012] Detection parameters:
  Position = (297.4, 290.7) = 0 42 31.03 41 16 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3441.7 +/- 80.8
  Background counts = 613.4
  Rate = 0.2 +/- 0.005

[Mon Jan 23 01:15:43 2012] Off-axis axis estimate = 0.57'
[Mon Jan 23 01:21:51 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:21:51 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Mon Jan 23 01:21:51 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Mon Jan 23 01:21:51 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 6.71"
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src24.ximg exists
[Mon Jan 23 02:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src24.csv
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Jan 23 02:51:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src24.csv
[Mon Jan 23 02:51:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jan 23 02:51:37 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Jan 23 06:54:00 2012] Spatial fit model total counts = 7447.650000, observed total counts = 7448.000000
[Mon Jan 23 06:54:00 2012] Offset between fit and detection position for source 30 = 0.164798 pixels
[Mon Jan 23 06:54:00 2012] 7316.910000 total counts/ 5643.460000 bgd. counts: snr = 22.276144
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.164798 pixels
  Position = (297.4, 290.5) = 0 42 31.04 41 16 20.1
  Extent = 5.0 (4.8-5.3)", rotation angle = 0
  Source counts = 1673.5 +/- 85.5
  Background counts = 5643.5
  Rate = 0.1 +/- 0.007
[Mon Jan 23 06:54:00 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 06:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 06:54:00 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 06:54:00 2012] Source does appear to be extended
[Mon Jan 23 06:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 06:54:01 2012] Source is confused with source 31
[Mon Jan 23 06:54:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:54:36 2012] Initial guess for spatial extent in simple fitting = 5.04"
[Mon Jan 23 06:54:36 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.817
[Mon Jan 23 06:54:36 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 5.04"
[Mon Jan 23 08:45:34 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src24.ximg exists
[Mon Jan 23 08:45:34 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Jan 23 08:45:34 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src24 appears to have run properly
[Mon Jan 23 08:45:35 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Jan 23 08:45:35 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Jan 23 08:45:35 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Mon Jan 23 13:38:48 2012] Spatial fit model total counts = 7455.340000, observed total counts = 7456.000000
[Mon Jan 23 13:38:48 2012] Offset between fit and detection position for source 30 = 0.014159 pixels
[Mon Jan 23 13:38:48 2012] 7148.050000 total counts/ 5418.340000 bgd. counts: snr = 23.498502
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.014159 pixels
  Position = (297.3, 290.5) = 0 42 31.04 41 16 20.0
  Extent = 5.2 (4.9-5.5)", rotation angle = 0
  Source counts = 1729.7 +/- 84.5
  Background counts = 5418.3
  Rate = 0.1 +/- 0.007
[Mon Jan 23 13:38:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 13:38:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 13:38:48 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 13:38:48 2012] Source does appear to be extended
[Mon Jan 23 13:38:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 13:39:33 2012] Counts = 1729.710000, rescaling region sizes by 2.000000
[Mon Jan 23 13:39:33 2012] XMMSAS src. selection expression = ellipse(25820.918600, 25224.463400, 621.271218, 621.271218, 0.000000, X, Y)
[Mon Jan 23 13:39:33 2012] Writing source region out to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src30_src.reg
[Mon Jan 23 13:39:33 2012] Extracting stamp from image fullrun_pn_xmm0202230301_pi300-10000_cl_sm2.00.img.gz, (262, 255) - (333, 326)
[Mon Jan 23 13:39:33 2012] XMMSAS bgd. selection expression = annulus(25820.918600, 25224.463400, 2070.904060, 4141.808119, X, Y) && !ellipse(24142.909340, 24876.622800, 1328.332838, 1328.332838, 0.000000, X, Y) && !ellipse(30002.873901, 28092.468811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29314.005310, 29975.415588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.013800, 29704.353200, 471.770414, 471.770414, 0.000000, X, Y) && !ellipse(25801.960160, 29189.421000, 391.919211, 391.919211, 0.000000, X, Y) && !ellipse(27008.006174, 28665.799200, 424.255212, 424.255212, 0.000000, X, Y) && !ellipse(30114.294861, 27191.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.200000, 26330.202000, 1357.024039, 1357.024039, 0.000000, X, Y) && !ellipse(21667.693512, 26726.748291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.505400, 26854.845800, 1246.880036, 443.468013, 118.866967, X, Y) && !ellipse(21615.688000, 25606.230000, 856.816025, 856.816025, 0.000000, X, Y) && !ellipse(23416.344000, 25523.080060, 352.344810, 352.344810, 0.000000, X, Y) && !ellipse(22260.439423, 25208.544128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25729.646000, 25273.599200, 1096.288032, 1096.288032, 0.000000, X, Y) && !ellipse(28003.079600, 24842.071000, 336.206410, 336.206410, 0.000000, X, Y) && !ellipse(22837.015800, 25007.238600, 588.586417, 588.586417, 0.000000, X, Y) && !ellipse(23369.206207, 23820.216034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22680.844727, 24134.146698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27677.132000, 24327.372000, 372.424011, 372.424011, 0.000000, X, Y) && !ellipse(21927.762400, 24058.117400, 497.617614, 497.617614, 0.000000, X, Y) && !ellipse(23331.864000, 23339.850000, 338.104810, 338.104810, 0.000000, X, Y) && !ellipse(23933.652161, 23005.822968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27579.734863, 22598.029053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22613.919403, 22473.895813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.653400, 22430.149800, 413.088812, 413.088812, 0.000000, X, Y) && !ellipse(23672.151000, 21787.604200, 655.522419, 655.522419, 0.000000, X, Y) && !ellipse(27818.552094, 21806.400208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.111960, 20714.668200, 556.642416, 556.642416, 0.000000, X, Y)
[Mon Jan 23 13:39:33 2012] Writing fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src30.gif
[Mon Jan 23 14:25:02 2012] Mean detx,y = (-1251.95, 796.30) 
[Mon Jan 23 14:25:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 23 14:25:42 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 23 14:25:43 2012] Setting source spectrum file to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Mon Jan 23 14:25:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Jan 24 02:49:34 2012] Updating aperture counts using extracted products
[Tue Jan 24 02:49:35 2012] Error reading totcts from fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Jan 24 02:49:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 02:49:36 2012] Using photon index=1.80, rate=0.134, arf fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src30.arf
[Tue Jan 24 02:49:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 02:49:36 2012] Updating source flux to 3.6e-13
[Tue Jan 24 03:04:20 2012] Flag c found in src. 30 procflags, skipping spectral fitting