[Mon Jan 23 01:15:42 2012] Detection parameters:
  Position = (212.7, 314.7) = 0 43 3.70 41 18 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 844.5 +/- 46.3
  Background counts = 493.9
  Rate = 0.06 +/- 0.003

[Mon Jan 23 01:15:43 2012] Off-axis axis estimate = 6.33'
[Mon Jan 23 01:21:51 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:21:51 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Mon Jan 23 01:21:51 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.854
[Mon Jan 23 01:21:51 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.59"
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jan 23 02:51:37 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src17 appears to have run properly
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jan 23 02:51:37 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Jan 23 06:54:00 2012] Spatial fit model total counts = 4010.960000, observed total counts = 4013.000000
[Mon Jan 23 06:54:00 2012] Offset between fit and detection position for source 21 = 0.606061 pixels
[Mon Jan 23 06:54:00 2012] 4159.200000 total counts/ 2948.810000 bgd. counts: snr = 22.289582
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.606061 pixels
  Position = (212.5, 314.2) = 0 43 3.80 41 18 2.7
  Extent = 15.6" x 9.1", rotation angle = 29
  Source counts = 1210.4 +/- 64.5
  Background counts = 2948.8
  Rate = 0.09 +/- 0.005
[Mon Jan 23 06:54:00 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 06:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 06:54:00 2012] Assessing source extent using major
[Mon Jan 23 06:54:00 2012] Source does appear to be extended
[Mon Jan 23 06:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.71
[Mon Jan 23 06:54:00 2012] Source is asymmetric
[Mon Jan 23 06:54:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:54:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 06:54:36 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Mon Jan 23 06:54:36 2012] source mask rpix=2.8, npix_max = 44, mask sum = 47, frac = 1.053
[Mon Jan 23 06:54:36 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.36"
[Mon Jan 23 08:45:34 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jan 23 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src17.csv
[Mon Jan 23 08:45:34 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jan 23 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src17.csv
[Mon Jan 23 08:45:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:45:35 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jan 23 08:45:35 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jan 23 08:45:35 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jan 23 13:38:48 2012] Warning, spatial fit 17 centroid is now closest to src. 26
[Mon Jan 23 13:38:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 13:38:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 13:38:48 2012] Assessing source extent using major
[Mon Jan 23 13:38:48 2012] Source does appear to be extended
[Mon Jan 23 13:38:48 2012] Computing asymmetry using major and minor axis, asym = 1.71
[Mon Jan 23 13:38:48 2012] Source is asymmetric
[Mon Jan 23 13:39:33 2012] Counts = 1210.390000, rescaling region sizes by 2.000000
[Mon Jan 23 13:39:33 2012] XMMSAS src. selection expression = ellipse(18437.503072, 27283.787662, 1870.320054, 1095.348013, 29.241117, X, Y)
[Mon Jan 23 13:39:33 2012] Writing source region out to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src21_src.reg
[Mon Jan 23 13:39:33 2012] Extracting stamp from image fullrun_pn_xmm0202230301_pi300-10000_cl_sm2.00.img.gz, (105, 207) - (320, 422)
[Mon Jan 23 13:39:33 2012] XMMSAS bgd. selection expression = annulus(18437.503072, 27283.787662, 6234.400179, 12468.800359, X, Y) && !ellipse(24142.909340, 24876.622800, 1328.332838, 1328.332838, 0.000000, X, Y) && !ellipse(30002.873901, 28092.468811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26931.899600, 36652.431000, 607.328017, 607.328017, 0.000000, X, Y) && !ellipse(20527.000000, 36673.696075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21942.284607, 36051.054535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16107.846000, 35561.460000, 1940.696056, 1940.696056, 0.000000, X, Y) && !ellipse(25303.391800, 31606.604460, 613.900018, 613.900018, 0.000000, X, Y) && !ellipse(29927.083435, 31310.916565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18536.286200, 31274.032700, 397.740811, 397.740811, 0.000000, X, Y) && !ellipse(30797.797638, 30544.359161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30024.998260, 30507.971985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29314.005310, 29975.415588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.013800, 29704.353200, 471.770414, 471.770414, 0.000000, X, Y) && !ellipse(25801.960160, 29189.421000, 391.919211, 391.919211, 0.000000, X, Y) && !ellipse(27008.006174, 28665.799200, 424.255212, 424.255212, 0.000000, X, Y) && !ellipse(19392.422200, 28804.680000, 414.185612, 414.185612, 0.000000, X, Y) && !ellipse(21008.387380, 28297.808460, 452.608013, 452.608013, 0.000000, X, Y) && !ellipse(13022.180023, 27808.691315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31099.659820, 27516.792400, 402.992812, 402.992812, 0.000000, X, Y) && !ellipse(30114.294861, 27191.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14607.276321, 27059.009277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.200000, 26330.202000, 1357.024039, 1357.024039, 0.000000, X, Y) && !ellipse(21667.693512, 26726.748291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.505400, 26854.845800, 1246.880036, 443.468013, 118.866967, X, Y) && !ellipse(19746.814331, 26591.527649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.688000, 25606.230000, 856.816025, 856.816025, 0.000000, X, Y) && !ellipse(23416.344000, 25523.080060, 352.344810, 352.344810, 0.000000, X, Y) && !ellipse(22260.439423, 25208.544128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25820.918600, 25224.463400, 414.180812, 414.180812, 0.000000, X, Y) && !ellipse(25729.646000, 25273.599200, 1096.288032, 1096.288032, 0.000000, X, Y) && !ellipse(28003.079600, 24842.071000, 336.206410, 336.206410, 0.000000, X, Y) && !ellipse(22837.015800, 25007.238600, 588.586417, 588.586417, 0.000000, X, Y) && !ellipse(20577.216000, 24913.784000, 516.990415, 516.990415, 0.000000, X, Y) && !ellipse(19358.584000, 24918.368000, 349.260010, 349.260010, 0.000000, X, Y) && !ellipse(19577.588600, 23733.970000, 1460.696042, 1460.696042, 0.000000, X, Y) && !ellipse(23369.206207, 23820.216034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18602.797147, 24143.245346, 493.097833, 404.083720, 40.263309, X, Y) && !ellipse(22680.844727, 24134.146698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27677.132000, 24327.372000, 372.424011, 372.424011, 0.000000, X, Y) && !ellipse(21003.760600, 24409.814800, 428.284812, 428.284812, 0.000000, X, Y) && !ellipse(21927.762400, 24058.117400, 497.617614, 497.617614, 0.000000, X, Y) && !ellipse(23331.864000, 23339.850000, 338.104810, 338.104810, 0.000000, X, Y) && !ellipse(16927.519460, 23449.755400, 434.130412, 434.130412, 0.000000, X, Y) && !ellipse(10895.506203, 23282.407990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.652161, 23005.822968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27579.734863, 22598.029053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22613.919403, 22473.895813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28639.653400, 22430.149800, 413.088812, 413.088812, 0.000000, X, Y) && !ellipse(23672.151000, 21787.604200, 655.522419, 655.522419, 0.000000, X, Y) && !ellipse(27818.552094, 21806.400208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11538.673111, 21711.708588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17344.126984, 21005.979233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.111960, 20714.668200, 556.642416, 556.642416, 0.000000, X, Y) && !ellipse(28651.848400, 20508.537800, 311.721609, 311.721609, 0.000000, X, Y) && !ellipse(26463.508800, 20469.827600, 398.113611, 398.113611, 0.000000, X, Y) && !ellipse(22743.186720, 19581.231000, 344.762410, 279.724808, 158.883000, X, Y) && !ellipse(22061.576000, 19085.280000, 373.530411, 373.530411, 0.000000, X, Y) && !ellipse(19770.421780, 18910.358600, 503.231214, 381.504811, 19.527628, X, Y) && !ellipse(11960.547974, 18417.407974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26497.465000, 17611.517200, 462.984013, 462.984013, 0.000000, X, Y) && !ellipse(12701.228134, 14976.204590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16025.184097, 14445.984619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31146.122000, 32318.442000, 1630.608047, 1630.608047, 0.000000, X, Y)
[Mon Jan 23 13:39:33 2012] Writing fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src21.gif
[Mon Jan 23 14:09:01 2012] Mean detx,y = (6227.76, -418.50) 
[Mon Jan 23 14:09:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 23 14:14:35 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 23 14:14:35 2012] Setting source spectrum file to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jan 23 14:14:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jan 24 02:49:34 2012] Updating aperture counts using extracted products
[Tue Jan 24 02:49:34 2012] Error reading totcts from fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jan 24 02:49:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 02:49:36 2012] Using photon index=1.80, rate=0.0938, arf fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src21.arf
[Tue Jan 24 02:49:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 02:49:36 2012] Updating source flux to 2.7e-13