[Mon Jan 23 01:15:42 2012] Detection parameters:
  Position = (242.1, 325.9) = 0 42 52.35 41 18 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4444.5 +/- 86.3
  Background counts = 523.0
  Rate = 0.3 +/- 0.005

[Mon Jan 23 01:15:43 2012] Off-axis axis estimate = 4.54'
[Mon Jan 23 01:21:51 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:21:51 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Mon Jan 23 01:21:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Mon Jan 23 01:21:51 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.70"
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jan 23 02:51:37 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_src13 appears to have run properly
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jan 23 02:51:37 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jan 23 02:51:37 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jan 23 06:54:00 2012] Spatial fit model total counts = 6671.000000, observed total counts = 6671.000000
[Mon Jan 23 06:54:00 2012] Offset between fit and detection position for source 17 = 0.121881 pixels
[Mon Jan 23 06:54:00 2012] 6668.900000 total counts/ 4149.140000 bgd. counts: snr = 39.118314
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.121881 pixels
  Position = (242.0, 325.8) = 0 42 52.40 41 18 53.6
  Extent = 5.6 (5.4-5.9)", rotation angle = 0
  Source counts = 2519.8 +/- 81.7
  Background counts = 4149.1
  Rate = 0.2 +/- 0.006
[Mon Jan 23 06:54:00 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 06:54:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 06:54:00 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 06:54:00 2012] Source does appear to be extended
[Mon Jan 23 06:54:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 06:54:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 06:54:36 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Mon Jan 23 06:54:36 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.237
[Mon Jan 23 06:54:36 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 5.65"
[Mon Jan 23 08:45:34 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jan 23 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src13.csv
[Mon Jan 23 08:45:34 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jan 23 08:45:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src13.csv
[Mon Jan 23 08:45:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 08:45:35 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jan 23 08:45:35 2012] fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jan 23 08:45:35 2012] Fit fullrun_pn_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Jan 23 13:38:48 2012] Spatial fit model total counts = 6670.990000, observed total counts = 6671.000000
[Mon Jan 23 13:38:48 2012] Offset between fit and detection position for source 17 = 0.000049 pixels
[Mon Jan 23 13:38:48 2012] 6668.850000 total counts/ 4146.490000 bgd. counts: snr = 39.171189
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.000049 pixels
  Position = (242.0, 325.8) = 0 42 52.40 41 18 53.6
  Extent = 5.7 (5.4-5.9)", rotation angle = 0
  Source counts = 2522.4 +/- 81.7
  Background counts = 4146.5
  Rate = 0.2 +/- 0.006
[Mon Jan 23 13:38:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 13:38:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 13:38:48 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 13:38:48 2012] Source does appear to be extended
[Mon Jan 23 13:38:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 13:39:33 2012] Counts = 2522.360000, rescaling region sizes by 2.000000
[Mon Jan 23 13:39:33 2012] XMMSAS src. selection expression = ellipse(21008.387380, 28297.808460, 678.912020, 678.912020, 0.000000, X, Y)
[Mon Jan 23 13:39:33 2012] Writing source region out to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src17_src.reg
[Mon Jan 23 13:39:33 2012] Extracting stamp from image fullrun_pn_xmm0202230301_pi300-10000_cl_sm2.00.img.gz, (203, 287) - (281, 365)
[Mon Jan 23 13:39:33 2012] XMMSAS bgd. selection expression = annulus(21008.387380, 28297.808460, 2263.040065, 4526.080130, X, Y) && !ellipse(24142.909340, 24876.622800, 1328.332838, 1328.332838, 0.000000, X, Y) && !ellipse(25303.391800, 31606.604460, 613.900018, 613.900018, 0.000000, X, Y) && !ellipse(18536.286200, 31274.032700, 397.740811, 397.740811, 0.000000, X, Y) && !ellipse(24897.013800, 29704.353200, 471.770414, 471.770414, 0.000000, X, Y) && !ellipse(25801.960160, 29189.421000, 391.919211, 391.919211, 0.000000, X, Y) && !ellipse(19392.422200, 28804.680000, 414.185612, 414.185612, 0.000000, X, Y) && !ellipse(18437.503072, 27283.787662, 1246.880036, 730.232009, 29.241117, X, Y) && !ellipse(21667.693512, 26726.748291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.505400, 26854.845800, 1246.880036, 443.468013, 118.866967, X, Y) && !ellipse(19746.814331, 26591.527649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.688000, 25606.230000, 856.816025, 856.816025, 0.000000, X, Y) && !ellipse(23416.344000, 25523.080060, 352.344810, 352.344810, 0.000000, X, Y) && !ellipse(22260.439423, 25208.544128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25820.918600, 25224.463400, 414.180812, 414.180812, 0.000000, X, Y) && !ellipse(25729.646000, 25273.599200, 1096.288032, 1096.288032, 0.000000, X, Y) && !ellipse(22837.015800, 25007.238600, 588.586417, 588.586417, 0.000000, X, Y) && !ellipse(20577.216000, 24913.784000, 516.990415, 516.990415, 0.000000, X, Y) && !ellipse(19358.584000, 24918.368000, 349.260010, 349.260010, 0.000000, X, Y) && !ellipse(19577.588600, 23733.970000, 1460.696042, 1460.696042, 0.000000, X, Y) && !ellipse(23369.206207, 23820.216034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18602.797147, 24143.245346, 493.097833, 404.083720, 40.263309, X, Y) && !ellipse(22680.844727, 24134.146698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21003.760600, 24409.814800, 428.284812, 428.284812, 0.000000, X, Y) && !ellipse(21927.762400, 24058.117400, 497.617614, 497.617614, 0.000000, X, Y) && !ellipse(16927.519460, 23449.755400, 434.130412, 434.130412, 0.000000, X, Y) && !ellipse(23933.652161, 23005.822968, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan 23 13:39:33 2012] Writing fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src17.gif
[Mon Jan 23 14:05:35 2012] Mean detx,y = (4355.03, 1446.88) 
[Mon Jan 23 14:05:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 23 14:06:21 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 23 14:06:21 2012] Setting source spectrum file to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jan 23 14:06:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jan 24 02:49:34 2012] Updating aperture counts using extracted products
[Tue Jan 24 02:49:34 2012] Error reading totcts from fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jan 24 02:49:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 02:49:36 2012] Using photon index=1.80, rate=0.195, arf fullrun_pn_xmm0202230301_pi300-10000_pass1_cl_src17.arf
[Tue Jan 24 02:49:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 02:49:36 2012] Updating source flux to 6e-13