[Mon Jan 23 01:16:35 2012] Detection parameters:
  Position = (242.0, 281.2) = 0 42 52.37 41 15 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1386.2 +/- 49.8
  Background counts = 166.1
  Rate = 0.06 +/- 0.002

[Mon Jan 23 01:16:36 2012] Off-axis axis estimate = 4.28'
[Mon Jan 23 05:07:06 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 05:07:06 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Mon Jan 23 05:07:06 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Mon Jan 23 05:07:06 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.57"
[Mon Jan 23 06:53:48 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jan 23 06:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_src13.csv
[Mon Jan 23 06:53:48 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jan 23 06:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_src13.csv
[Mon Jan 23 06:53:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 06:53:48 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jan 23 06:53:48 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jan 23 06:53:48 2012] Fit fullrun_mos2_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jan 23 06:54:19 2012] Warning, spatial fit 13 centroid is now closest to src. 7
[Mon Jan 23 06:54:19 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 06:54:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 06:54:19 2012] Assessing source extent using major
[Mon Jan 23 06:54:19 2012] Source does appear to be extended
[Mon Jan 23 06:54:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 10:53:28 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:53:28 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Mon Jan 23 10:53:28 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Mon Jan 23 10:53:28 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.57"
[Mon Jan 23 13:38:33 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jan 23 13:38:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_src13.csv
[Mon Jan 23 13:38:33 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jan 23 13:38:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_src13.csv
[Mon Jan 23 13:38:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 13:38:34 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jan 23 13:38:34 2012] fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jan 23 13:38:34 2012] Fit fullrun_mos2_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Jan 23 13:39:14 2012] Spatial fit model total counts = 10434.600000, observed total counts = 10445.000000
[Mon Jan 23 13:39:14 2012] Offset between fit and detection position for source 9 = 7.195204 pixels
[Mon Jan 23 13:39:14 2012] Warning, changing simple spatial fit ID from 13 to 9
[Mon Jan 23 13:39:14 2012] 9763.840000 total counts/ 8358.810000 bgd. counts: snr = 15.367859
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 7.195204 pixels
  Position = (248.6, 278.2) = 0 42 49.84 41 15 26.6
  Extent = 23.9 (19.5-27.4)", rotation angle = 0
  Source counts = 1405.0 +/- 98.8
  Background counts = 8358.8
  Rate = 0.07 +/- 0.005
[Mon Jan 23 13:39:14 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 13:39:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 13:39:14 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 13:39:14 2012] Source does appear to be extended
[Mon Jan 23 13:39:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 13:39:14 2012] Source is confused with source 7
[Mon Jan 23 21:55:49 2012] Counts = 1405.030000, rescaling region sizes by 2.000000
[Mon Jan 23 21:55:49 2012] XMMSAS src. selection expression = ellipse(21581.860000, 24158.052000, 2864.244082, 2864.244082, 0.000000, X, Y)
[Mon Jan 23 21:55:49 2012] Writing source region out to fullrun_mos2_xmm0202230301_pi300-10000_pass1_cl_src9_src.reg
[Mon Jan 23 21:55:49 2012] Extracting stamp from image fullrun_mos2_xmm0202230301_pi300-10000_cl_sm2.00.img.gz, (84, 114) - (413, 443)
[Mon Jan 23 21:55:49 2012] XMMSAS bgd. selection expression = annulus(21581.860000, 24158.052000, 9547.480275, 19094.960549, X, Y) && !ellipse(24143.026420, 24888.349600, 424.134412, 424.134412, 0.000000, X, Y) && !ellipse(16921.907780, 23458.331200, 421.404012, 421.404012, 0.000000, X, Y) && !ellipse(23427.264000, 25539.415200, 331.676810, 331.676810, 0.000000, X, Y) && !ellipse(21010.816800, 28304.959500, 375.847211, 375.847211, 0.000000, X, Y) && !ellipse(21920.046252, 24074.233860, 522.831956, 365.695187, 290.751742, X, Y) && !ellipse(20463.020000, 24883.802000, 322.395209, 322.395209, 0.000000, X, Y) && !ellipse(27669.358400, 24296.900200, 361.255210, 339.707210, 41.171000, X, Y) && !ellipse(25822.894000, 25247.443200, 344.324010, 344.324010, 0.000000, X, Y) && !ellipse(22819.504200, 25104.296000, 1226.696035, 1226.696035, 0.000000, X, Y) && !ellipse(26465.221000, 20468.233980, 389.036811, 389.036811, 0.000000, X, Y) && !ellipse(25586.943994, 21491.062339, 466.581333, 374.332710, 344.456697, X, Y) && !ellipse(18606.142000, 24162.359200, 459.256813, 307.329609, 59.813000, X, Y) && !ellipse(31095.054660, 27515.663600, 371.053611, 371.053611, 0.000000, X, Y) && !ellipse(28717.579529, 20592.029633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22072.353165, 19163.427399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19789.958020, 18878.916800, 589.489617, 294.489608, 31.233000, X, Y) && !ellipse(25810.901097, 29183.525951, 364.691565, 307.647683, 127.232263, X, Y) && !ellipse(21918.658128, 36075.715204, 544.300103, 343.960175, 345.401016, X, Y) && !ellipse(19398.619000, 28805.609600, 364.514410, 364.514410, 0.000000, X, Y) && !ellipse(19352.352068, 24931.275932, 440.217205, 325.606684, 29.274824, X, Y) && !ellipse(29872.837400, 27940.031200, 377.528011, 322.431209, 99.504000, X, Y) && !ellipse(28644.188000, 22443.401800, 373.079211, 373.079211, 0.000000, X, Y) && !ellipse(28000.867400, 24848.526600, 294.744808, 294.744808, 0.000000, X, Y) && !ellipse(22983.321594, 25431.765717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10877.179863, 23285.607300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22241.894600, 25111.627800, 277.140808, 277.140808, 0.000000, X, Y) && !ellipse(26487.370850, 17611.556137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23407.327118, 24227.954193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.335720, 21887.422200, 344.369610, 344.369610, 0.000000, X, Y) && !ellipse(18443.600600, 27329.660000, 392.428811, 392.428811, 0.000000, X, Y) && !ellipse(18586.991333, 31242.987640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20402.835120, 36795.119000, 429.367212, 429.367212, 0.000000, X, Y) && !ellipse(11547.230270, 21703.639954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16058.069001, 14429.311657, 617.808018, 300.905874, 222.900409, X, Y) && !ellipse(22727.951620, 19573.611000, 315.700009, 315.700009, 0.000000, X, Y) && !ellipse(36322.579071, 19072.541763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.872000, 23318.806800, 386.834411, 386.834411, 0.000000, X, Y) && !ellipse(12666.516281, 15004.521805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26975.705078, 36663.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11973.185060, 18456.720000, 376.272811, 376.272811, 0.000000, X, Y) && !ellipse(22739.446000, 23839.852000, 1230.104035, 1230.104035, 0.000000, X, Y) && !ellipse(21019.859460, 25813.296400, 323.422409, 323.422409, 0.000000, X, Y) && !ellipse(25730.174000, 25403.220600, 1097.344032, 1097.344032, 0.000000, X, Y) && !ellipse(22664.471940, 22523.814400, 428.861612, 428.861612, 0.000000, X, Y) && !ellipse(23415.698000, 23156.490000, 1153.744033, 1153.744033, 0.000000, X, Y) && !ellipse(15835.876526, 35217.794830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.818240, 11102.148800, 383.820011, 383.820011, 0.000000, X, Y) && !ellipse(26988.259400, 28714.424600, 349.355210, 349.355210, 0.000000, X, Y) && !ellipse(19748.974000, 27563.424000, 1421.920041, 1421.920041, 0.000000, X, Y) && !ellipse(21779.019260, 27526.225200, 340.725610, 224.956006, 10.103000, X, Y) && !ellipse(24917.322060, 29726.083000, 330.297610, 330.297610, 0.000000, X, Y) && !ellipse(13024.138107, 27842.176544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14524.296036, 27044.204834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30090.270800, 27197.179400, 351.254410, 351.254410, 0.000000, X, Y) && !ellipse(29308.347000, 26423.472800, 388.516811, 388.516811, 0.000000, X, Y) && !ellipse(23681.429688, 21768.266022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17073.728180, 33872.480865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29596.758000, 30452.019000, 1397.472040, 1397.472040, 0.000000, X, Y) && !ellipse(23999.276520, 26352.875031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18339.770935, 24918.463593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27188.343719, 22023.025375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30263.622000, 26330.676000, 1355.648039, 1355.648039, 0.000000, X, Y) && !ellipse(22026.772000, 26305.654000, 1308.920038, 1308.920038, 0.000000, X, Y) && !ellipse(31143.485107, 11090.938263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.055389, 22487.420532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26223.941498, 40470.571167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30419.400208, 13753.302078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28641.770477, 40924.740479, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan 23 21:55:49 2012] Writing fullrun_mos2_xmm0202230301_pi300-10000_pass1_cl_src9.gif
[Mon Jan 23 22:05:37 2012] Mean detx,y = (-1362.72, 1133.15) 
[Mon Jan 23 22:05:40 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 23 22:14:01 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 23 22:14:02 2012] Setting source spectrum file to fullrun_mos2_xmm0202230301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jan 23 22:14:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202230301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jan 24 02:49:40 2012] Updating aperture counts using extracted products
[Tue Jan 24 02:49:40 2012] Error reading totcts from fullrun_mos2_xmm0202230301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jan 24 02:49:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 02:49:42 2012] Using photon index=1.80, rate=0.0673, arf fullrun_mos2_xmm0202230301_pi300-10000_pass1_cl_src9.arf
[Tue Jan 24 02:49:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 02:49:42 2012] Updating source flux to 6.1e-13
[Tue Jan 24 02:56:14 2012] Flag c found in src. 9 procflags, skipping spectral fitting