[Mon Jan 23 01:16:10 2012] Detection parameters:
  Position = (246.4, 287.0) = 0 42 50.71 41 16 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.2 +/- 24.0
  Background counts = 176.9
  Rate = 0.005 +/- 0.001

[Mon Jan 23 01:16:10 2012] Off-axis axis estimate = 3.87'
[Mon Jan 23 02:51:38 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 02:51:38 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Mon Jan 23 02:51:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.852
[Mon Jan 23 02:51:38 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 8.36"
[Mon Jan 23 05:07:05 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_src69.ximg exists
[Mon Jan 23 05:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_src69.csv
[Mon Jan 23 05:07:05 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_src69_1.ximg exists
[Mon Jan 23 05:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_src69.csv
[Mon Jan 23 05:07:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 05:07:05 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Mon Jan 23 05:07:06 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Mon Jan 23 05:07:06 2012] Fit fullrun_mos1_xmm0202230301_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Mon Jan 23 06:54:10 2012] Warning, spatial fit 69 centroid is now closest to src. 7
[Mon Jan 23 06:54:10 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 06:54:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 06:54:10 2012] Assessing source extent using major
[Mon Jan 23 06:54:10 2012] Source does appear to be extended
[Mon Jan 23 06:54:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 06:54:10 2012] Source is confused with source 7
[Mon Jan 23 08:45:36 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 08:45:36 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Mon Jan 23 08:45:36 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.852
[Mon Jan 23 08:45:36 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 8.36"
[Mon Jan 23 10:53:27 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_src63.ximg exists
[Mon Jan 23 10:53:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_src63.csv
[Mon Jan 23 10:53:27 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_src63_1.ximg exists
[Mon Jan 23 10:53:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_src63.csv
[Mon Jan 23 10:53:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 10:53:28 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Mon Jan 23 10:53:28 2012] fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Mon Jan 23 10:53:28 2012] Fit fullrun_mos1_xmm0202230301_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Mon Jan 23 13:39:01 2012] Warning, spatial fit 63 centroid is now closest to src. 7
[Mon Jan 23 13:39:01 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 13:39:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 13:39:01 2012] Assessing source extent using major
[Mon Jan 23 13:39:01 2012] Source does appear to be extended
[Mon Jan 23 13:39:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 18:44:36 2012] XMMSAS src. selection expression = ellipse(21385.252823, 24918.941498, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan 23 18:44:36 2012] Writing source region out to fullrun_mos1_xmm0202230301_pi300-10000_pass1_cl_src67_src.reg
[Mon Jan 23 18:44:36 2012] Extracting stamp from image fullrun_mos1_xmm0202230301_pi300-10000_cl_sm2.00.img.gz, (209, 249) - (284, 324)
[Mon Jan 23 18:44:36 2012] XMMSAS bgd. selection expression = annulus(21385.252823, 24918.941498, 1087.500000, 2175.000000, X, Y) && !ellipse(24633.578000, 24992.178000, 1095.848032, 816.016023, 326.543000, X, Y) && !ellipse(23375.658000, 25524.952000, 255.764807, 255.764807, 0.000000, X, Y) && !ellipse(20447.429000, 24863.351000, 358.285610, 358.285610, 0.000000, X, Y) && !ellipse(21898.706000, 24028.483200, 354.110410, 324.621609, 0.000000, X, Y) && !ellipse(22823.184000, 24980.020000, 446.052013, 446.052013, 0.000000, X, Y) && !ellipse(20998.164000, 24414.556000, 309.045609, 309.045609, 0.000000, X, Y) && !ellipse(19342.126040, 24941.531800, 378.871211, 378.871211, 0.000000, X, Y) && !ellipse(22699.104000, 25200.242000, 1302.072037, 1302.072037, 0.000000, X, Y) && !ellipse(22334.358600, 25119.170200, 929.288027, 929.288027, 0.000000, X, Y) && !ellipse(22063.450851, 24503.989624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23331.138000, 23310.736000, 274.450408, 274.450408, 0.000000, X, Y) && !ellipse(21016.138480, 25794.218000, 266.748808, 266.748808, 0.000000, X, Y) && !ellipse(22270.690000, 23537.320000, 1266.504036, 1266.504036, 0.000000, X, Y) && !ellipse(23936.604553, 22977.525665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.664000, 23669.634000, 1457.728042, 1457.728042, 0.000000, X, Y) && !ellipse(22646.904440, 22579.930200, 366.355211, 366.355211, 0.000000, X, Y) && !ellipse(19765.510000, 27460.462000, 1421.208041, 1421.208041, 0.000000, X, Y) && !ellipse(22718.410000, 26816.858940, 326.435209, 326.435209, 0.000000, X, Y) && !ellipse(21363.382019, 25351.015656, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan 23 18:44:36 2012] Writing fullrun_mos1_xmm0202230301_pi300-10000_pass1_cl_src67.gif
[Mon Jan 23 19:05:08 2012] Mean detx,y = (1571.90, 2246.23) 
[Mon Jan 23 19:05:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 23 19:05:20 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 23 19:05:21 2012] Setting source spectrum file to fullrun_mos1_xmm0202230301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Jan 23 19:05:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202230301_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon Jan 23 21:55:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan 23 21:55:42 2012] rmf not generated due to insufficient counts
[Tue Jan 24 02:49:39 2012] Updating aperture counts using extracted products
[Tue Jan 24 02:49:39 2012] Error reading totcts from fullrun_mos1_xmm0202230301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Tue Jan 24 02:49:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 02:49:40 2012] Using photon index=1.80, rate=0.00545, arf fullrun_mos1_xmm0202230301_pi300-10000_pass1_cl_src67.arf
[Tue Jan 24 02:49:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 24 02:49:40 2012] Updating source flux to 5.6e-14
[Tue Jan 24 02:49:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting