[Wed Aug  8 02:11:30 2012] Detection parameters:
  Position = (317.6, 310.9) = 4 7 48.35 -12 11 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244844.0 +/- 582.6
  Background counts = 223.1
  Rate = 3 +/- 0.007

[Wed Aug  8 02:11:31 2012] Off-axis axis estimate = 1.66'
[Wed Aug  8 02:19:19 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 02:19:19 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Aug  8 02:19:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Wed Aug  8 02:19:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Aug  8 03:39:18 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 03:39:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 03:39:18 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 03:39:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 03:39:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 03:39:19 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 03:39:19 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 03:39:19 2012] Fit fullrun_pn_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 06:30:26 2012] Spatial fit model total counts = 190523.000000, observed total counts = 196982.000000
[Wed Aug  8 06:30:26 2012] Offset between fit and detection position for source 1 = 0.164095 pixels
[Wed Aug  8 06:30:26 2012] 190529.000000 total counts/ 25600.000000 bgd. counts: snr = 1030.806250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.164095 pixels
  Position = (317.5, 310.9) = 4 7 48.40 -12 11 36.5
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 164929.0 +/- 436.5
  Background counts = 25600.0
  Rate = 2 +/- 0.006
[Wed Aug  8 06:30:27 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 06:30:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 06:30:27 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 06:30:27 2012] Source does appear to be extended
[Wed Aug  8 06:30:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 06:30:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 06:30:54 2012] Initial guess for spatial extent in simple fitting = 6.20"
[Wed Aug  8 06:30:54 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.808
[Wed Aug  8 06:30:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.20"
[Wed Aug  8 07:42:32 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 07:42:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 07:42:32 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 07:42:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 07:42:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 07:42:33 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 07:42:33 2012] fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 07:42:33 2012] Fit fullrun_pn_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 10:23:03 2012] Spatial fit model total counts = 190484.000000, observed total counts = 196982.000000
[Wed Aug  8 10:23:03 2012] Offset between fit and detection position for source 1 = 0.000119 pixels
[Wed Aug  8 10:23:03 2012] 190493.000000 total counts/ 25600.000000 bgd. counts: snr = 1030.581250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000119 pixels
  Position = (317.5, 310.9) = 4 7 48.40 -12 11 36.5
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 164893.0 +/- 436.5
  Background counts = 25600.0
  Rate = 2 +/- 0.006
[Wed Aug  8 10:23:03 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 10:23:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 10:23:03 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 10:23:03 2012] Source does appear to be extended
[Wed Aug  8 10:23:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 10:23:51 2012] Counts = 164893.000000, rescaling region sizes by 3.000000
[Wed Aug  8 10:23:51 2012] XMMSAS src. selection expression = ellipse(27569.722800, 27000.952000, 1116.984632, 1116.984632, 0.000000, X, Y)
[Wed Aug  8 10:23:51 2012] Writing source region out to fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 10:23:51 2012] Extracting stamp from image fullrun_pn_xmm0202210401_pi300-10000_cl_sm2.00.img.gz, (253, 247) - (382, 375)
[Wed Aug  8 10:23:51 2012] XMMSAS bgd. selection expression = annulus(27569.722800, 27000.952000, 5584.923161, 11169.846321, X, Y) && !ellipse(31133.542023, 19876.415604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35396.559800, 28848.738000, 1977.895257, 1977.895257, 0.000000, X, Y) && !ellipse(38651.966370, 24786.203308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36882.174286, 19453.538467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29783.549896, 27750.676270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31487.260956, 21449.807205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16029.559586, 38305.800995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20820.397995, 37769.060272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33562.338928, 34503.390167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28180.832800, 33912.895600, 400.000012, 400.000012, 0.000000, X, Y) && !ellipse(22147.587402, 33972.960449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34977.701800, 32647.461600, 483.654414, 483.654414, 0.000000, X, Y) && !ellipse(19795.256668, 31023.727356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35059.300201, 18723.696136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31498.106750, 27168.112396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17604.029520, 27358.646600, 381.345611, 381.345611, 0.000000, X, Y) && !ellipse(21723.893000, 25554.925000, 353.960010, 353.960010, 0.000000, X, Y) && !ellipse(37817.899536, 24406.581909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37828.416107, 23864.812561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30639.122467, 22309.483124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27423.182600, 22379.937400, 386.362411, 386.362411, 0.000000, X, Y) && !ellipse(19224.920532, 33586.064270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35244.061400, 31169.618800, 385.076811, 385.076811, 0.000000, X, Y) && !ellipse(27758.559052, 28428.659241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38343.154602, 28132.320801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29019.793549, 28133.181030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26523.595800, 25088.824400, 493.429614, 493.429614, 0.000000, X, Y) && !ellipse(25036.348400, 23358.507000, 269.269608, 269.269608, 0.000000, X, Y)
[Wed Aug  8 10:23:51 2012] Writing fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 10:26:10 2012] Mean detx,y = (175.70, -64.84) 
[Wed Aug  8 10:26:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 10:32:49 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 10:32:50 2012] Setting source spectrum file to fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 10:32:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 16:18:33 2012] Updating aperture counts using extracted products
[Wed Aug  8 16:18:34 2012] Error reading totcts from fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 16:18:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:18:36 2012] Using photon index=1.80, rate=2.34, arf fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 16:18:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:18:36 2012] Updating source flux to 5.2e-12
[Wed Aug  8 16:25:33 2012] Reading fit data from xmm0202210401/analysis//spectral/fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  8 16:25:33 2012] Spectral fit parameter nH value = 1.31269e+13
[Wed Aug  8 16:25:33 2012] Spectral fit parameter PhoIndex value = 1.94977
[Wed Aug  8 16:25:33 2012] Failed to get F(0.3-8.0) from xmm0202210401/analysis//spectral/fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 16:25:33 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:25:33 2012] Using Nh = 1.3e+13, photon index=1.95, rate=2.34, arf fullrun_pn_xmm0202210401_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 16:25:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:25:33 2012] Updating source flux to 4.7e-12