[Wed Aug  8 02:12:35 2012] Detection parameters:
  Position = (407.4, 331.9) = 4 7 21.72 -12 10 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4154.0 +/- 77.6
  Background counts = 87.0
  Rate = 0.08 +/- 0.001

[Wed Aug  8 02:12:36 2012] Off-axis axis estimate = 8.26'
[Wed Aug  8 04:49:01 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 04:49:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 04:49:01 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Wed Aug  8 04:49:01 2012] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.671
[Wed Aug  8 04:49:01 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.56"
[Wed Aug  8 06:30:16 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src2.ximg exists
[Wed Aug  8 06:30:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src2.csv
[Wed Aug  8 06:30:16 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Aug  8 06:30:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src2.csv
[Wed Aug  8 06:30:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 06:30:17 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Aug  8 06:30:17 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Aug  8 06:30:17 2012] Fit fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Aug  8 06:30:42 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.728633 pixels away
[Wed Aug  8 06:30:42 2012] Spatial fit model total counts = 3976.280000, observed total counts = 3411.000000
[Wed Aug  8 06:30:42 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  8 06:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 06:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 06:30:42 2012] Assessing source extent using major
[Wed Aug  8 06:30:42 2012] Source does appear to be extended
[Wed Aug  8 06:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 08:56:13 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 08:56:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 08:56:13 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Wed Aug  8 08:56:13 2012] source mask rpix=2.4, npix_max = 34, mask sum = 23, frac = 0.671
[Wed Aug  8 08:56:13 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.56"
[Wed Aug  8 10:22:48 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src2.ximg exists
[Wed Aug  8 10:22:48 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Aug  8 10:22:48 2012] Fit fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Aug  8 10:22:48 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Aug  8 10:22:48 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Aug  8 10:22:49 2012] Fit fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Aug  8 10:23:28 2012] Warning, spatial fit 2 centroid is now closest to src. 22
[Wed Aug  8 10:23:28 2012] Spatial fit model total counts = 4297.980000, observed total counts = 3411.000000
[Wed Aug  8 10:23:28 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  8 10:23:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 10:23:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 10:23:28 2012] Assessing source extent using major
[Wed Aug  8 10:23:28 2012] Source does appear to be extended
[Wed Aug  8 10:23:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 14:56:08 2012] Counts = 4154.011719, rescaling region sizes by 2.000000
[Wed Aug  8 14:56:08 2012] XMMSAS src. selection expression = ellipse(35392.665680, 28830.006744, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug  8 14:56:08 2012] Writing source region out to fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug  8 14:56:08 2012] Extracting stamp from image fullrun_mos2_xmm0202210401_pi300-10000_cl_sm2.00.img.gz, (332, 257) - (482, 407)
[Wed Aug  8 14:56:08 2012] XMMSAS bgd. selection expression = annulus(35392.665680, 28830.006744, 4350.000000, 8700.000000, X, Y) && !ellipse(27561.197600, 26996.429740, 1293.285637, 1293.285637, 0.000000, X, Y) && !ellipse(31129.599304, 19877.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33551.482513, 34690.829926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31481.289800, 21456.351000, 389.810411, 389.810411, 0.000000, X, Y) && !ellipse(38653.745100, 24606.221800, 341.154410, 179.873605, 77.534000, X, Y) && !ellipse(27778.939056, 37989.568420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27409.584656, 22388.791504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30640.143800, 22296.689200, 412.817612, 277.288808, 344.919200, X, Y) && !ellipse(34995.571800, 32669.450600, 396.861611, 396.861611, 0.000000, X, Y) && !ellipse(28305.946442, 26041.862244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37840.334534, 23722.577332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.611145, 33999.202759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37770.539124, 24567.046570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.941162, 25527.952118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44199.838593, 25108.306152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38415.284920, 35795.614524, 382.228011, 382.228011, 0.000000, X, Y) && !ellipse(34962.649170, 29329.048706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28483.536041, 20296.856750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42113.633392, 19732.860825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.841949, 26564.451660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40383.372040, 32086.256805, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 14:56:08 2012] Writing fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src3.gif
[Wed Aug  8 15:00:19 2012] Mean detx,y = (-6830.31, 4177.95) 
[Wed Aug  8 15:00:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 15:02:35 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 15:02:35 2012] Setting source spectrum file to fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  8 15:02:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug  8 15:35:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  8 15:35:48 2012] rmf not generated due to insufficient counts
[Wed Aug  8 16:18:43 2012] Updating aperture counts using extracted products
[Wed Aug  8 16:18:43 2012] Error reading totcts from fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  8 16:18:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:18:45 2012] Using photon index=1.80, rate=0.0783, arf fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src3.arf
[Wed Aug  8 16:18:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:18:45 2012] Updating source flux to 1.1e-12
[Wed Aug  8 16:20:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting