[Wed Aug  8 02:12:36 2012] Detection parameters:
  Position = (375.9, 447.4) = 4 7 31.08 -12 1 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.7 +/- 17.7
  Background counts = 81.2
  Rate = 0.001 +/- 0.0002

[Wed Aug  8 02:12:36 2012] Off-axis axis estimate = 12.17'
[Wed Aug  8 04:49:01 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 04:49:01 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Wed Aug  8 04:49:01 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.074
[Wed Aug  8 04:49:01 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 12.51"
[Wed Aug  8 06:30:17 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src40.ximg exists
[Wed Aug  8 06:30:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src40.csv
[Wed Aug  8 06:30:17 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed Aug  8 06:30:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src40.csv
[Wed Aug  8 06:30:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 06:30:17 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed Aug  8 06:30:17 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed Aug  8 06:30:17 2012] Fit fullrun_mos2_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Wed Aug  8 06:30:42 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.318807 pixels away
[Wed Aug  8 06:30:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 06:30:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 06:30:42 2012] Assessing source extent using major
[Wed Aug  8 06:30:42 2012] Source does appear to be extended
[Wed Aug  8 06:30:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 08:56:13 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 08:56:13 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Wed Aug  8 08:56:13 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.074
[Wed Aug  8 08:56:13 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 12.51"
[Wed Aug  8 10:22:48 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src37.ximg exists
[Wed Aug  8 10:22:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src37.csv
[Wed Aug  8 10:22:48 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Aug  8 10:22:48 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src37.csv
[Wed Aug  8 10:22:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 10:22:49 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Aug  8 10:22:49 2012] fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Aug  8 10:22:49 2012] Fit fullrun_mos2_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Wed Aug  8 10:23:28 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.298952 pixels away
[Wed Aug  8 10:23:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 10:23:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 10:23:28 2012] Assessing source extent using major
[Wed Aug  8 10:23:28 2012] Source does appear to be extended
[Wed Aug  8 10:23:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 14:56:09 2012] XMMSAS src. selection expression = ellipse(32652.189575, 38874.779083, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  8 14:56:09 2012] Writing source region out to fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src14_src.reg
[Wed Aug  8 14:56:09 2012] Extracting stamp from image fullrun_mos2_xmm0202210401_pi300-10000_cl_sm2.00.img.gz, (338, 410) - (413, 485)
[Wed Aug  8 14:56:09 2012] XMMSAS bgd. selection expression = annulus(32652.189575, 38874.779083, 1087.500000, 2175.000000, X, Y) && !ellipse(31055.700000, 39750.576400, 542.716816, 542.716816, 0.000000, X, Y)
[Wed Aug  8 14:56:09 2012] Writing fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src14.gif
[Wed Aug  8 15:26:13 2012] Mean detx,y = (-1057.86, 12775.62) 
[Wed Aug  8 15:26:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 15:26:49 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 15:26:50 2012] Setting source spectrum file to fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Aug  8 15:26:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Aug  8 16:14:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  8 16:14:48 2012] rmf not generated due to insufficient counts
[Wed Aug  8 16:18:44 2012] Updating aperture counts using extracted products
[Wed Aug  8 16:18:44 2012] Error reading totcts from fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Aug  8 16:18:47 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:18:47 2012] Using photon index=1.80, rate=0.00119, arf fullrun_mos2_xmm0202210401_pi300-10000_pass1_cl_src14.arf
[Wed Aug  8 16:18:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:18:47 2012] Updating source flux to 2.7e-14
[Wed Aug  8 16:20:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting