[Wed Aug  8 02:12:03 2012] Detection parameters:
  Position = (317.4, 310.9) = 4 7 48.42 -12 11 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72802.2 +/- 325.3
  Background counts = 90.4
  Rate = 0.8 +/- 0.004

[Wed Aug  8 02:12:04 2012] Off-axis axis estimate = 1.64'
[Wed Aug  8 03:39:19 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 03:39:19 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Aug  8 03:39:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Wed Aug  8 03:39:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Aug  8 04:49:00 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  8 04:49:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 04:49:00 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  8 04:49:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_src1.csv
[Wed Aug  8 04:49:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 04:49:00 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  8 04:49:00 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  8 04:49:00 2012] Fit fullrun_mos1_xmm0202210401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  8 06:30:34 2012] Spatial fit model total counts = 59343.000000, observed total counts = 59343.000000
[Wed Aug  8 06:30:34 2012] Offset between fit and detection position for source 1 = 0.116369 pixels
[Wed Aug  8 06:30:34 2012] 59370.600000 total counts/ 12833.400000 bgd. counts: snr = 410.799006
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.116369 pixels
  Position = (317.3, 310.8) = 4 7 48.44 -12 11 37.0
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 46537.2 +/- 243.7
  Background counts = 12833.4
  Rate = 0.6 +/- 0.003
[Wed Aug  8 06:30:34 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 06:30:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 06:30:34 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 06:30:34 2012] Source does appear to be extended
[Wed Aug  8 06:30:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 07:42:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 07:42:33 2012] Initial guess for spatial extent in simple fitting = 5.70"
[Wed Aug  8 07:42:33 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.915
[Wed Aug  8 07:42:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.70"
[Wed Aug  8 08:56:12 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 08:56:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 08:56:12 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 08:56:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 08:56:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 08:56:12 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 08:56:12 2012] fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 08:56:12 2012] Fit fullrun_mos1_xmm0202210401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 10:23:16 2012] Spatial fit model total counts = 59360.700000, observed total counts = 59343.000000
[Wed Aug  8 10:23:16 2012] Offset between fit and detection position for source 1 = 0.000733 pixels
[Wed Aug  8 10:23:16 2012] 59388.800000 total counts/ 12859.000000 bgd. counts: snr = 410.324631
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000733 pixels
  Position = (317.3, 310.8) = 4 7 48.44 -12 11 37.0
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 46529.8 +/- 243.7
  Background counts = 12859.0
  Rate = 0.6 +/- 0.003
[Wed Aug  8 10:23:16 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 10:23:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 10:23:16 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 10:23:16 2012] Source does appear to be extended
[Wed Aug  8 10:23:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 13:44:48 2012] Counts = 46529.800000, rescaling region sizes by 3.000000
[Wed Aug  8 13:44:48 2012] XMMSAS src. selection expression = ellipse(27558.027000, 26990.757200, 1025.283630, 1025.283630, 0.000000, X, Y)
[Wed Aug  8 13:44:48 2012] Writing source region out to fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 13:44:48 2012] Extracting stamp from image fullrun_mos1_xmm0202210401_pi300-10000_cl_sm2.00.img.gz, (258, 252) - (376, 370)
[Wed Aug  8 13:44:48 2012] XMMSAS bgd. selection expression = annulus(27558.027000, 26990.757200, 5126.418148, 10252.836295, X, Y) && !ellipse(35375.918000, 28874.206000, 335.755210, 284.975208, 83.086000, X, Y) && !ellipse(31125.473389, 19718.842270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36872.809998, 19506.530197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33583.239319, 34667.829407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.889679, 37964.335022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31462.743620, 21456.922400, 374.679211, 374.679211, 0.000000, X, Y) && !ellipse(38655.404633, 24609.128784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27414.698200, 22397.350800, 406.646412, 406.646412, 0.000000, X, Y) && !ellipse(17583.034000, 27346.166400, 421.768812, 421.768812, 0.000000, X, Y) && !ellipse(25852.368200, 18400.777400, 283.033608, 283.033608, 0.000000, X, Y) && !ellipse(22359.722600, 25892.028200, 354.761610, 354.761610, 0.000000, X, Y) && !ellipse(22175.043060, 33967.228241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34995.473297, 32704.392761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21156.176895, 32649.393829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30628.018200, 22281.119800, 281.410408, 281.410408, 0.000000, X, Y) && !ellipse(38407.026642, 35799.870178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31483.416473, 27109.839813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28193.484711, 33944.169312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37798.082397, 24499.234467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38326.419952, 28146.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28482.280212, 20332.015976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18270.644592, 19156.128723, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  8 13:44:48 2012] Writing fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 13:45:15 2012] Mean detx,y = (130.17, -146.34) 
[Wed Aug  8 13:45:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 13:50:54 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 13:50:55 2012] Setting source spectrum file to fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 13:50:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 16:18:38 2012] Updating aperture counts using extracted products
[Wed Aug  8 16:18:38 2012] Error reading totcts from fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 16:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:18:40 2012] Using photon index=1.80, rate=0.606, arf fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 16:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:18:40 2012] Updating source flux to 5.4e-12
[Wed Aug  8 16:20:42 2012] Reading fit data from xmm0202210401/analysis//spectral/fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  8 16:20:42 2012] Spectral fit parameter nH value = 1.08827e+13
[Wed Aug  8 16:20:42 2012] Spectral fit parameter PhoIndex value = 1.90369
[Wed Aug  8 16:20:42 2012] Failed to get F(0.3-8.0) from xmm0202210401/analysis//spectral/fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 16:20:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 16:20:42 2012] Using Nh = 1.1e+13, photon index=1.90, rate=0.606, arf fullrun_mos1_xmm0202210401_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 16:20:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 16:20:42 2012] Updating source flux to 5.1e-12