[Mon Jun 24 14:32:00 2013] Detection parameters:
  Position = (256.1, 389.5) = 4 8 6.87 -12 5 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.7 +/- 22.8
  Background counts = 62.9
  Rate = 0.003 +/- 0.0003

[Mon Jun 24 14:32:01 2013] Off-axis axis estimate = 7.28'
[Mon Jun 24 17:06:32 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 17:06:32 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Mon Jun 24 17:06:32 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.757
[Mon Jun 24 17:06:32 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.07"
[Mon Jun 24 19:16:18 2013] fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 24 19:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_src17.csv
[Mon Jun 24 19:16:18 2013] fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 24 19:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_src17.csv
[Mon Jun 24 19:16:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:16:19 2013] fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 24 19:16:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 24 19:16:19 2013] fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 24 19:16:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 24 19:16:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:16:43 2013] Spatial fit model total counts = 513.997000, observed total counts = 449.000000
[Mon Jun 24 19:16:43 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 24 19:16:43 2013] Spatial fit model total counts = 387.976000, observed total counts = 388.000000
[Mon Jun 24 19:16:43 2013] Offset between fit and detection position for source 7 = 5.398429 pixels
[Mon Jun 24 19:16:43 2013] Warning, changing simple spatial fit ID from 17 to 25
[Mon Jun 24 19:16:43 2013] 394.047017 total counts/ 394.047000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 5.398429 pixels
  Position = (253.0, 385.0) = 4 8 7.76 -12 6 11.1
  Extent = 19.7 (19.6-39.3)", rotation angle = 0
  Source counts = 0.0 +/- 19.9
  Background counts = 394.0
  Rate = 2e-10 +/- 0.0003
  Deleting source due to low Poisson probability