[Mon Jun 24 14:31:30 2013] Detection parameters:
  Position = (359.4, 230.0) = 4 7 36.21 -12 17 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1847.6 +/- 61.4
  Background counts = 66.1
  Rate = 0.04 +/- 0.001

[Mon Jun 24 14:31:32 2013] Off-axis axis estimate = 6.64'
[Mon Jun 24 15:56:57 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 15:56:57 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Mon Jun 24 15:56:57 2013] source mask rpix=2.2, npix_max = 30, mask sum = 20, frac = 0.665
[Mon Jun 24 15:56:57 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.75"
[Mon Jun 24 17:06:31 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 24 17:06:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_src3.csv
[Mon Jun 24 17:06:31 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 24 17:06:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_src3.csv
[Mon Jun 24 17:06:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 17:06:31 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 24 17:06:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 24 17:06:31 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 24 17:06:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 24 17:06:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202210301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 19:16:34 2013] Warning, spatial fit 3 centroid is now closest to src. 23
[Mon Jun 24 19:16:35 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 19:16:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 19:16:35 2013] Assessing source extent using major
[Mon Jun 24 19:16:35 2013] Source does appear to be extended
[Mon Jun 24 19:16:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 20:17:21 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 20:17:21 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Mon Jun 24 20:17:21 2013] source mask rpix=2.2, npix_max = 30, mask sum = 20, frac = 0.665
[Mon Jun 24 20:17:21 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.75"
[Mon Jun 24 21:21:19 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 24 21:21:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_src3.csv
[Mon Jun 24 21:21:19 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 24 21:21:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_src3.csv
[Mon Jun 24 21:21:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 21:21:19 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 24 21:21:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 24 21:21:19 2013] fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 24 21:21:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 24 21:21:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202210301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 22:59:55 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.151820 pixels away
[Mon Jun 24 22:59:56 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 22:59:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 22:59:56 2013] Assessing source extent using major
[Mon Jun 24 22:59:56 2013] Source does appear to be extended
[Mon Jun 24 22:59:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 00:54:17 2013] Counts = 1847.601929, rescaling region sizes by 2.000000
[Tue Jun 25 00:54:17 2013] XMMSAS src. selection expression = ellipse(31216.477173, 19962.636353, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun 25 00:54:17 2013] Writing source region out to fullrun_mos1_xmm0202210301_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 25 00:54:17 2013] Extracting stamp from image fullrun_mos1_xmm0202210301_pi300-10000_cl_sm2.00.img.gz, (284, 155) - (434, 305)
[Tue Jun 25 00:54:17 2013] XMMSAS bgd. selection expression = annulus(31216.477173, 19962.636353, 4350.000000, 8700.000000, X, Y) && !ellipse(27641.653200, 26930.862200, 1395.422440, 1334.997638, 30.765659, X, Y) && !ellipse(35471.254000, 28820.136000, 350.893610, 285.342408, 90.000000, X, Y) && !ellipse(25949.079590, 13945.866043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36955.755768, 19445.374252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31544.972780, 21389.680400, 439.428813, 439.428813, 0.000000, X, Y) && !ellipse(27505.399800, 22317.155800, 385.601611, 385.601611, 0.000000, X, Y) && !ellipse(26014.904000, 18343.926600, 683.817620, 228.769607, 6.838169, X, Y) && !ellipse(38761.032318, 24515.724854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30926.684000, 14689.582000, 1299.736037, 1299.736037, 0.000000, X, Y) && !ellipse(30714.733200, 22229.683400, 418.460012, 418.460012, 0.000000, X, Y) && !ellipse(31585.964000, 27051.448800, 274.468008, 274.468008, 0.000000, X, Y) && !ellipse(22453.132000, 25829.608600, 329.982211, 329.982211, 0.000000, X, Y) && !ellipse(35117.556854, 18592.540344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28550.244400, 20269.413400, 309.556809, 309.556809, 0.000000, X, Y) && !ellipse(37905.103973, 24441.904419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35537.112549, 18133.167175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25105.384300, 23289.094400, 303.938399, 303.938399, 0.000000, X, Y) && !ellipse(30609.919800, 14839.247559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35005.198669, 29262.229584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37042.931000, 14579.160889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35796.312439, 13579.742813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.150000, 28665.226000, 1189.440034, 1189.440034, 0.000000, X, Y) && !ellipse(22770.505066, 15006.979034, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 25 00:54:17 2013] Writing fullrun_mos1_xmm0202210301_pi300-10000_pass1_cl_src2.gif
[Tue Jun 25 00:59:50 2013] Mean detx,y = (-5306.93, 5600.57) 
[Tue Jun 25 00:59:53 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 01:02:05 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 01:02:05 2013] Setting source spectrum file to fullrun_mos1_xmm0202210301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 25 01:02:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0202210301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 25 01:31:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 25 01:31:02 2013] rmf not generated due to insufficient counts