[Mon May 20 08:17:35 2013] Detection parameters:
  Position = (380.7, 379.7) = 0 8 59.48 -32 10 7.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.0 +/- 11.5
  Background counts = 14.1
  Rate = 0.005 +/- 0.0009

[Mon May 20 08:17:37 2013] Off-axis axis estimate = 8.38'
[Mon May 20 08:18:05 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Mon May 20 08:18:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 08:18:05 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Mon May 20 08:18:05 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.040
[Mon May 20 08:18:05 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.62"
[Mon May 20 08:18:05 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 20 08:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_src5.csv
[Mon May 20 08:18:05 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 20 08:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_src5.csv
[Mon May 20 08:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:18:06 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 20 08:18:06 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 20 08:18:06 2013] Fit fullrun_mos2_xmm0202190301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon May 20 08:18:25 2013] Source 9 is offset by 3.492804 and 8.069956 pixels which is larger than
2 X fitted extent = 1.264878 x 1.264878, not incorporating fit results
[Mon May 20 08:18:25 2013] Vigneting correction estimate = 1.000000
[Mon May 20 08:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 08:18:25 2013] Assessing source extent using major
[Mon May 20 08:18:25 2013] Source does appear to be extended
[Mon May 20 08:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 08:18:41 2013] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Mon May 20 08:18:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 08:18:41 2013] Initial guess for spatial extent in simple fitting = 10.62"
[Mon May 20 08:18:41 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.040
[Mon May 20 08:18:41 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.62"
[Mon May 20 08:18:42 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 20 08:18:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_src5.csv
[Mon May 20 08:18:42 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 20 08:18:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_src5.csv
[Mon May 20 08:18:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:18:42 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 20 08:18:42 2013] fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 20 08:18:42 2013] Fit fullrun_mos2_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon May 20 08:18:59 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.126881 pixels away
[Mon May 20 08:18:59 2013] Vigneting correction estimate = 1.000000
[Mon May 20 08:18:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 08:18:59 2013] Assessing source extent using major
[Mon May 20 08:18:59 2013] Source does appear to be extended
[Mon May 20 08:18:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 08:19:31 2013] XMMSAS src. selection expression = ellipse(33074.033905, 32983.922211, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 08:19:31 2013] Not overwriting source region fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9_src.reg
[Mon May 20 08:19:31 2013] Extracting stamp from image fullrun_mos2_xmm0202190301_pi300-10000_cl_sm2.00.img.gz, (343, 342) - (418, 417)
[Mon May 20 08:19:31 2013] XMMSAS bgd. selection expression = annulus(33074.033905, 32983.922211, 1087.500000, 2175.000000, X, Y)
[Mon May 20 08:19:31 2013] Writing fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9.gif
[Mon May 20 08:20:46 2013] Mean detx,y = (2586.72, -11584.92) 
[Mon May 20 08:20:48 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 08:21:04 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 08:21:04 2013] Setting source spectrum file to fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon May 20 08:21:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon May 20 08:37:02 2013] Not generating rmf since there are only 68 counts
[Mon May 20 08:37:02 2013] rmf not generated due to insufficient counts
[Mon May 20 08:38:53 2013] Updating aperture counts using extracted products
[Mon May 20 08:38:53 2013] Total counts from fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 104.00
[Mon May 20 08:38:53 2013] Total counts from fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 450.00
[Mon May 20 08:38:53 2013] Got source and background scale factors 1331200.000000, 11152000.000000
[Mon May 20 08:38:53 2013] User source parameters:
  Position = (380.7, 379.7) = 0 8 59.48 -32 10 7.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.3 +/- 11.2
  Background aperture counts = 53.7
  Rate = 0.002 +/- 0.0005

[Mon May 20 08:38:53 2013] Updating counts from extracted products
[Mon May 20 08:38:53 2013] Set source signif. to 50.28/7.33 = 6.86
[Mon May 20 08:38:56 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 08:38:56 2013] Using photon index=1.80, rate=0.00233, arf fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9.arf
[Mon May 20 08:38:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 08:38:56 2013] Updating source flux to 4.5e-14
[Mon May 20 08:39:06 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 08:39:10 2013] xmm0202190301/analysis//spectral/fullrun_mos2_xmm0202190301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete