[Mon May 20 08:17:34 2013] Detection parameters:
  Position = (157.7, 239.3) = 0 10 15.96 -32 20 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.0 +/- 11.1
  Background counts = 16.4
  Rate = 0.005 +/- 0.0009

[Mon May 20 08:17:34 2013] Off-axis axis estimate = 11.06'
[Mon May 20 08:18:04 2013] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Mon May 20 08:18:04 2013] Initial guess for spatial extent in simple fitting = 11.96"
[Mon May 20 08:18:04 2013] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.160
[Mon May 20 08:18:04 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.96"
[Mon May 20 08:18:05 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_src6.ximg exists
[Mon May 20 08:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_src6.csv
[Mon May 20 08:18:05 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon May 20 08:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_src6.csv
[Mon May 20 08:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:18:05 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon May 20 08:18:05 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon May 20 08:18:05 2013] Fit fullrun_mos1_xmm0202190301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon May 20 08:18:20 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.402946 pixels away
[Mon May 20 08:18:20 2013] Vigneting correction estimate = 1.000000
[Mon May 20 08:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 08:18:20 2013] Assessing source extent using major
[Mon May 20 08:18:20 2013] Source does appear to be extended
[Mon May 20 08:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 08:18:40 2013] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Mon May 20 08:18:40 2013] Initial guess for spatial extent in simple fitting = 11.96"
[Mon May 20 08:18:40 2013] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.160
[Mon May 20 08:18:40 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.96"
[Mon May 20 08:18:41 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_src6.ximg exists
[Mon May 20 08:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_src6.csv
[Mon May 20 08:18:41 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon May 20 08:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_src6.csv
[Mon May 20 08:18:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:18:41 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon May 20 08:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 20 08:18:41 2013] fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon May 20 08:18:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon May 20 08:18:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202190301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:18:56 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 12.885379 pixels away
[Mon May 20 08:18:56 2013] Vigneting correction estimate = 1.000000
[Mon May 20 08:18:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 08:18:56 2013] Assessing source extent using major
[Mon May 20 08:18:56 2013] Source does appear to be extended
[Mon May 20 08:18:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 08:19:24 2013] XMMSAS src. selection expression = ellipse(13674.309647, 20772.948639, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 08:19:24 2013] Not overwriting source region fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_src.reg
[Mon May 20 08:19:24 2013] Extracting stamp from image fullrun_mos1_xmm0202190301_pi300-10000_cl_sm2.00.img.gz, (120, 202) - (195, 277)
[Mon May 20 08:19:24 2013] XMMSAS bgd. selection expression = annulus(13674.309647, 20772.948639, 1087.500000, 2175.000000, X, Y)
[Mon May 20 08:19:24 2013] Writing fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18.gif
[Mon May 20 08:19:25 2013] ../../xmm0202190301/products/events/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0202190301/products/events/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Mon May 20 08:19:25 2013] Mean detx,y = (10020.89, 5330.72) 
[Mon May 20 08:19:25 2013] ../../xmm0202190301/products/images/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_src.img and ../../xmm0202190301/products/images/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Mon May 20 08:19:25 2013] ../../xmm0202190301/products/spectra/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0202190301/products/spectra/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Mon May 20 08:19:25 2013] Setting source spectrum file to fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 20 08:19:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May 20 08:19:25 2013] ../../xmm0202190301/products/lightcurves/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0202190301/products/lightcurves/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Mon May 20 08:19:31 2013] Not generating rmf since there are only 59 counts
[Mon May 20 08:19:31 2013] rmf not generated due to insufficient counts
[Mon May 20 08:19:31 2013] fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Mon May 20 08:38:48 2013] Updating aperture counts using extracted products
[Mon May 20 08:38:48 2013] Total counts from fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 121.00
[Mon May 20 08:38:48 2013] Total counts from fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_bgd.pi.gz = 431.00
[Mon May 20 08:38:48 2013] Got source and background scale factors 1345600.000000, 9851014.000000
[Mon May 20 08:38:48 2013] User source parameters:
  Position = (157.7, 239.3) = 0 10 15.96 -32 20 17.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 62.1 +/- 12.0
  Background aperture counts = 58.9
  Rate = 0.003 +/- 0.0006

[Mon May 20 08:38:48 2013] Updating counts from extracted products
[Mon May 20 08:38:48 2013] Set source signif. to 62.13/7.67 = 8.10
[Mon May 20 08:38:51 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 08:38:51 2013] Using photon index=1.80, rate=0.00291, arf fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18.arf
[Mon May 20 08:38:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 08:38:51 2013] Updating source flux to 5.2e-14
[Mon May 20 08:38:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 08:39:06 2013] xmm0202190301/analysis//spectral/fullrun_mos1_xmm0202190301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete