[Wed Jul 11 05:28:16 2012] Detection parameters:
  Position = (294.1, 322.4) = 12 42 13.76 33 17 5.8
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 702.0 +/- 70.0
  Background counts = 1031.1
  Rate = 0.01 +/- 0.001

[Wed Jul 11 05:28:16 2012] Off-axis axis estimate = 1.77'
[Wed Jul 11 05:32:37 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 05:32:37 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Jul 11 05:32:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Wed Jul 11 05:32:37 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 7.31"
[Wed Jul 11 08:57:54 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src96.ximg exists
[Wed Jul 11 08:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src96.csv
[Wed Jul 11 08:57:54 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src96_1.ximg exists
[Wed Jul 11 08:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src96.csv
[Wed Jul 11 08:57:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 08:57:56 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Wed Jul 11 08:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src96.csv
[Wed Jul 11 08:57:56 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Wed Jul 11 08:57:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src96.csv
[Wed Jul 11 08:57:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:29:03 2012] Source 99 is offset by -6.628471 and 1.636212 pixels which is larger than
2 X fitted extent = 2.435724 x 2.435724, not incorporating fit results
[Wed Jul 11 12:29:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:03 2012] Assessing source extent using major
[Wed Jul 11 12:29:03 2012] Source does appear to be extended
[Wed Jul 11 12:29:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 12:29:03 2012] Source is confused with source 1
[Wed Jul 11 12:29:35 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:29:35 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Jul 11 12:29:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Wed Jul 11 12:29:35 2012] Giving source the simple spatial ID 93 for pass 1, mean size = 7.31"
[Wed Jul 11 17:06:51 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src93.ximg exists
[Wed Jul 11 17:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src93.csv
[Wed Jul 11 17:06:51 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src93_1.ximg exists
[Wed Jul 11 17:06:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src93.csv
[Wed Jul 11 17:06:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:06:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Wed Jul 11 17:06:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src93.csv
[Wed Jul 11 17:06:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Wed Jul 11 17:06:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src93.csv
[Wed Jul 11 17:06:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:50:12 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 99 at 24.989974 pixels away
[Wed Jul 11 19:50:12 2012] Source 99 is offset by 6.206839 and -5.471749 pixels which is larger than
2 X fitted extent = 0.907945 x 0.907945, not incorporating fit results
[Wed Jul 11 19:50:12 2012] Source 99 is offset by -6.628471 and 1.640490 pixels which is larger than
2 X fitted extent = 2.511287 x 2.511287, not incorporating fit results
[Wed Jul 11 19:50:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:12 2012] Assessing source extent using major
[Wed Jul 11 19:50:12 2012] Source does appear to be extended
[Wed Jul 11 19:50:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 19:50:43 2012] XMMSAS src. selection expression = ellipse(25537.781036, 28001.743805, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 11 19:50:43 2012] Writing source region out to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src99_src.reg
[Wed Jul 11 19:50:43 2012] Extracting stamp from image fullrun_pn_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (219, 247) - (369, 397)
[Wed Jul 11 19:50:43 2012] XMMSAS bgd. selection expression = annulus(25537.781036, 28001.743805, 2175.000000, 4350.000000, X, Y) && !ellipse(26312.877498, 27848.132400, 1586.299246, 1586.299246, 0.000000, X, Y) && !ellipse(26851.795640, 30076.952200, 427.743212, 427.743212, 0.000000, X, Y) && !ellipse(26516.631927, 29634.565582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.643311, 29083.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29800.334991, 29004.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26083.537200, 25732.811600, 405.674412, 405.674412, 0.000000, X, Y) && !ellipse(27339.915400, 25586.972000, 1153.952033, 1153.952033, 0.000000, X, Y) && !ellipse(27752.230400, 24822.737200, 1187.016034, 388.362411, 62.993300, X, Y) && !ellipse(28091.774000, 24086.538000, 1196.872034, 1196.872034, 0.000000, X, Y) && !ellipse(28517.046000, 23274.456000, 1163.352033, 1163.352033, 0.000000, X, Y) && !ellipse(28576.021332, 32529.351990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24866.885365, 29952.851134, 695.495853, 424.152877, 90.000000, X, Y) && !ellipse(25602.507996, 29032.702301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.683502, 28259.427673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21701.064230, 25937.075800, 464.332013, 338.506410, 106.465810, X, Y) && !ellipse(29498.969600, 25459.078800, 300.240809, 300.240809, 0.000000, X, Y) && !ellipse(30359.770905, 25067.506317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27131.329620, 23989.763550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.560000, 23460.300000, 450.967213, 450.967213, 0.000000, X, Y) && !ellipse(23164.837982, 23458.439087, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 11 19:50:43 2012] Writing fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src99.gif
[Wed Jul 11 22:30:31 2012] Mean detx,y = (99.40, -118.12) 
[Wed Jul 11 22:30:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 22:31:41 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 22:31:41 2012] Setting source spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Wed Jul 11 22:31:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Thu Jul 12 02:33:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 02:33:59 2012] rmf not generated due to insufficient counts
[Thu Jul 12 04:36:01 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:01 2012] Error reading totcts from fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Thu Jul 12 04:36:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:03 2012] Using photon index=1.80, rate=0.0108, arf fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src99.arf
[Thu Jul 12 04:36:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:03 2012] Updating source flux to 2.5e-14
[Thu Jul 12 04:38:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting