[Wed Jul 11 05:28:15 2012] Detection parameters:
  Position = (373.9, 173.2) = 12 41 46.13 33 6 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 781.0 +/- 38.6
  Background counts = 175.3
  Rate = 0.01 +/- 0.0005

[Wed Jul 11 05:28:16 2012] Off-axis axis estimate = 10.60'
[Wed Jul 11 05:32:37 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 05:32:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 05:32:37 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Wed Jul 11 05:32:37 2012] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.759
[Wed Jul 11 05:32:37 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.73"
[Wed Jul 11 08:57:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 11 08:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src4.csv
[Wed Jul 11 08:57:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 11 08:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src4.csv
[Wed Jul 11 08:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 08:57:54 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 11 08:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 11 08:57:54 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 11 08:57:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 11 08:57:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:29:03 2012] Warning, spatial fit 4 centroid is now closest to src. 39
[Wed Jul 11 12:29:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:03 2012] Assessing source extent using major
[Wed Jul 11 12:29:03 2012] Source does appear to be extended
[Wed Jul 11 12:29:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 12:29:35 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:29:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 12:29:35 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Wed Jul 11 12:29:35 2012] source mask rpix=2.7, npix_max = 40, mask sum = 31, frac = 0.759
[Wed Jul 11 12:29:35 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.73"
[Wed Jul 11 17:06:50 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 11 17:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src4.csv
[Wed Jul 11 17:06:50 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 11 17:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src4.csv
[Wed Jul 11 17:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:06:52 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 11 17:06:52 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 11 17:06:52 2012] Fit fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 11 19:50:12 2012] Spatial fit model total counts = 1630.770000, observed total counts = 1694.000000
[Wed Jul 11 19:50:12 2012] Offset between fit and detection position for source 4 = 0.454192 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.454192 pixels
  Position = (373.5, 173.0) = 12 41 46.28 33 6 19.1
  Extent = 13.8 (13.3-14.8)", rotation angle = 0
  Source counts = 1444.7 +/- 38.0
  Background counts = 0.0
  Rate = 0.02 +/- 0.0006
[Wed Jul 11 19:50:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:12 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 19:50:12 2012] Source does appear to be extended
[Wed Jul 11 19:50:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 19:50:39 2012] Counts = 1444.650000, rescaling region sizes by 2.000000
[Wed Jul 11 19:50:39 2012] XMMSAS src. selection expression = ellipse(32445.065800, 15004.979400, 1661.940048, 1661.940048, 0.000000, X, Y)
[Wed Jul 11 19:50:39 2012] Writing source region out to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src4_src.reg
[Wed Jul 11 19:50:39 2012] Extracting stamp from image fullrun_pn_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (278, 78) - (469, 269)
[Wed Jul 11 19:50:39 2012] XMMSAS bgd. selection expression = annulus(32445.065800, 15004.979400, 5539.800159, 11079.600319, X, Y) && !ellipse(37244.782257, 21780.957062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29794.940000, 20317.059200, 350.326410, 350.326410, 0.000000, X, Y) && !ellipse(31572.349335, 14397.352448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26083.537200, 25732.811600, 405.674412, 405.674412, 0.000000, X, Y) && !ellipse(27339.915400, 25586.972000, 1153.952033, 1153.952033, 0.000000, X, Y) && !ellipse(27752.230400, 24822.737200, 1187.016034, 388.362411, 62.993300, X, Y) && !ellipse(28091.774000, 24086.538000, 1196.872034, 1196.872034, 0.000000, X, Y) && !ellipse(28517.046000, 23274.456000, 1163.352033, 1163.352033, 0.000000, X, Y) && !ellipse(29171.608000, 21632.204000, 1841.264053, 1841.264053, 0.000000, X, Y) && !ellipse(29148.988000, 22181.878000, 1324.024038, 1324.024038, 0.000000, X, Y) && !ellipse(29602.477825, 20955.060111, 1431.552041, 409.708180, 69.768045, X, Y) && !ellipse(35877.874939, 19990.735855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30236.144775, 19610.912674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.454000, 19112.846000, 1449.824042, 1449.824042, 0.000000, X, Y) && !ellipse(30815.591200, 18426.291400, 2876.144083, 445.235213, 64.393200, X, Y) && !ellipse(31038.474000, 18004.000000, 1703.896049, 1703.896049, 0.000000, X, Y) && !ellipse(23578.262400, 17512.205860, 407.716812, 407.716812, 0.000000, X, Y) && !ellipse(31385.774000, 17141.598000, 1670.056048, 1670.056048, 0.000000, X, Y) && !ellipse(31815.683200, 16336.719800, 1780.144051, 388.935211, 64.123400, X, Y) && !ellipse(31791.984000, 16446.946000, 2096.072060, 2096.072060, 0.000000, X, Y) && !ellipse(21701.064230, 25937.075800, 464.332013, 338.506410, 106.465810, X, Y) && !ellipse(29498.969600, 25459.078800, 300.240809, 300.240809, 0.000000, X, Y) && !ellipse(30359.770905, 25067.506317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27131.329620, 23989.763550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38917.862244, 23367.939758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.560000, 23460.300000, 450.967213, 450.967213, 0.000000, X, Y) && !ellipse(23164.837982, 23458.439087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26843.678436, 22420.094299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40423.412537, 22218.345261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.735168, 21978.662491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29179.220093, 20458.481659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32970.429000, 19180.670800, 535.996015, 394.780811, 76.034000, X, Y) && !ellipse(29345.139960, 18192.590800, 605.943217, 290.979208, 322.471442, X, Y) && !ellipse(26121.279680, 14098.911600, 654.243219, 311.227209, 350.831147, X, Y) && !ellipse(30694.245000, 16825.331400, 929.264027, 929.264027, 0.000000, X, Y) && !ellipse(25951.217880, 15944.113000, 434.495213, 434.495213, 0.000000, X, Y)
[Wed Jul 11 19:50:39 2012] Writing fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src4.gif
[Wed Jul 11 19:57:52 2012] Mean detx,y = (85.09, 13526.36) 
[Wed Jul 11 19:57:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 20:00:14 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 20:00:14 2012] Setting source spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jul 11 20:00:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 12 04:35:59 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:35:59 2012] Error reading totcts from fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 12 04:36:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:01 2012] Using photon index=1.80, rate=0.0225, arf fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src4.arf
[Thu Jul 12 04:36:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:01 2012] Updating source flux to 1.4e-13