[Wed Jul 11 05:28:15 2012] Detection parameters:
  Position = (331.8, 260.0) = 12 42 0.68 33 12 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 829.6 +/- 44.2
  Background counts = 233.9
  Rate = 0.01 +/- 0.0008

[Wed Jul 11 05:28:16 2012] Off-axis axis estimate = 3.69'
[Wed Jul 11 05:32:37 2012] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 05:32:37 2012] Initial guess for spatial extent in simple fitting = 8.28"
[Wed Jul 11 05:32:37 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.866
[Wed Jul 11 05:32:37 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.28"
[Wed Jul 11 08:57:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src24.ximg exists
[Wed Jul 11 08:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src24.csv
[Wed Jul 11 08:57:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed Jul 11 08:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src24.csv
[Wed Jul 11 08:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 08:57:55 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed Jul 11 08:57:55 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Jul 11 08:57:55 2012] Fit fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Wed Jul 11 12:29:03 2012] Warning, spatial fit 24 centroid is now closest to src. 27
[Wed Jul 11 12:29:03 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.539407 pixels away
[Wed Jul 11 12:29:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:03 2012] Assessing source extent using major
[Wed Jul 11 12:29:03 2012] Source does appear to be extended
[Wed Jul 11 12:29:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 12:29:03 2012] Source is confused with source 24
[Wed Jul 11 12:29:03 2012] Source is confused with source 27
[Wed Jul 11 12:29:35 2012] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:29:35 2012] Initial guess for spatial extent in simple fitting = 8.28"
[Wed Jul 11 12:29:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.866
[Wed Jul 11 12:29:35 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 8.28"
[Wed Jul 11 17:06:50 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src24.ximg exists
[Wed Jul 11 17:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src24.csv
[Wed Jul 11 17:06:50 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Jul 11 17:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src24.csv
[Wed Jul 11 17:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:06:52 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Jul 11 17:06:52 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Jul 11 17:06:52 2012] Fit fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Wed Jul 11 19:50:12 2012] Warning, spatial fit 24 centroid is now closest to src. 27
[Wed Jul 11 19:50:12 2012] Spatial fit model total counts = 5163.350000, observed total counts = 5149.000000
[Wed Jul 11 19:50:12 2012] Offset between fit and detection position for source 26 = 6.327574 pixels
[Wed Jul 11 19:50:12 2012] Warning, changing simple spatial fit ID from 24 to 25
[Wed Jul 11 19:50:12 2012] 5159.950000 total counts/ 3534.710000 bgd. counts: snr = 27.336355
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 6.327574 pixels
  Position = (335.8, 255.0) = 12 41 59.32 33 12 15.9
  Extent = 14.2 (13.4-15.9)", rotation angle = 0
  Source counts = 1625.2 +/- 71.8
  Background counts = 3534.7
  Rate = 0.03 +/- 0.001
[Wed Jul 11 19:50:12 2012] Spatial fit model total counts = 3924.650000, observed total counts = 3876.000000
[Wed Jul 11 19:50:12 2012] Offset between fit and detection position for source 26 = 5.819989 pixels
[Wed Jul 11 19:50:12 2012] Warning, changing simple spatial fit ID from 25 to 26
[Wed Jul 11 19:50:12 2012] 3707.434000 total counts/ 369.174000 bgd. counts: snr = 173.741915
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.819989 pixels
  Position = (335.9, 249.2) = 12 41 59.29 33 11 50.6
  Extent = 23.0 (22.8-46.0)", rotation angle = 0
  Source counts = 3338.3 +/- 60.9
  Background counts = 369.2
  Rate = 0.05 +/- 0.0009
[Wed Jul 11 19:50:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:12 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 19:50:12 2012] Source does appear to be extended
[Wed Jul 11 19:50:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 19:50:40 2012] Counts = 3338.260000, rescaling region sizes by 2.000000
[Wed Jul 11 19:50:40 2012] XMMSAS src. selection expression = ellipse(29171.608000, 21632.204000, 2761.896079, 2761.896079, 0.000000, X, Y)
[Wed Jul 11 19:50:40 2012] Writing source region out to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src26_src.reg
[Wed Jul 11 19:50:40 2012] Extracting stamp from image fullrun_pn_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (177, 90) - (495, 408)
[Wed Jul 11 19:50:41 2012] XMMSAS bgd. selection expression = annulus(29171.608000, 21632.204000, 9206.320265, 18412.640530, X, Y) && !ellipse(26312.877498, 27848.132400, 1586.299246, 1586.299246, 0.000000, X, Y) && !ellipse(37244.782257, 21780.957062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29794.940000, 20317.059200, 350.326410, 350.326410, 0.000000, X, Y) && !ellipse(32445.065800, 15004.979400, 1107.960032, 1107.960032, 0.000000, X, Y) && !ellipse(31572.349335, 14397.352448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26851.795640, 30076.952200, 427.743212, 427.743212, 0.000000, X, Y) && !ellipse(16012.238174, 11740.795181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35025.642395, 39079.856201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11384.703979, 34588.890076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19742.336624, 13036.651260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13862.956116, 31202.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34920.938660, 30249.767731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.631927, 29634.565582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.643311, 29083.684174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29800.334991, 29004.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40485.441986, 27419.564911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26083.537200, 25732.811600, 405.674412, 405.674412, 0.000000, X, Y) && !ellipse(27339.915400, 25586.972000, 1153.952033, 1153.952033, 0.000000, X, Y) && !ellipse(27752.230400, 24822.737200, 1187.016034, 388.362411, 62.993300, X, Y) && !ellipse(28091.774000, 24086.538000, 1196.872034, 1196.872034, 0.000000, X, Y) && !ellipse(28517.046000, 23274.456000, 1163.352033, 1163.352033, 0.000000, X, Y) && !ellipse(19045.301000, 23433.318400, 408.055212, 408.055212, 0.000000, X, Y) && !ellipse(29148.988000, 22181.878000, 1324.024038, 1324.024038, 0.000000, X, Y) && !ellipse(29602.477825, 20955.060111, 1431.552041, 409.708180, 69.768045, X, Y) && !ellipse(19888.111008, 14059.085785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35877.874939, 19990.735855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30236.144775, 19610.912674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.454000, 19112.846000, 1449.824042, 1449.824042, 0.000000, X, Y) && !ellipse(15417.187400, 18516.465600, 491.964014, 491.964014, 0.000000, X, Y) && !ellipse(30815.591200, 18426.291400, 2876.144083, 445.235213, 64.393200, X, Y) && !ellipse(31038.474000, 18004.000000, 1703.896049, 1703.896049, 0.000000, X, Y) && !ellipse(23578.262400, 17512.205860, 407.716812, 407.716812, 0.000000, X, Y) && !ellipse(31385.774000, 17141.598000, 1670.056048, 1670.056048, 0.000000, X, Y) && !ellipse(31815.683200, 16336.719800, 1780.144051, 388.935211, 64.123400, X, Y) && !ellipse(31791.984000, 16446.946000, 2096.072060, 2096.072060, 0.000000, X, Y) && !ellipse(15741.998672, 19566.329422, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(30206.413757, 40048.572845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23327.416046, 39802.762268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32472.145400, 38220.903200, 427.616012, 427.616012, 0.000000, X, Y) && !ellipse(26317.985291, 37471.734161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20752.620407, 37512.040161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34350.292000, 37938.044000, 1953.024056, 1953.024056, 0.000000, X, Y) && !ellipse(16573.450302, 36730.797791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33243.836340, 36786.006400, 356.764010, 356.764010, 0.000000, X, Y) && !ellipse(26851.569183, 36054.067993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17694.830000, 35537.728200, 662.541619, 662.541619, 0.000000, X, Y) && !ellipse(32925.500666, 35564.855800, 831.200024, 831.200024, 0.000000, X, Y) && !ellipse(16067.075150, 35642.841125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18358.930954, 12834.853104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31382.474915, 35288.615082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.227203, 33373.592896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32660.167938, 33130.490448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10533.910800, 33018.949960, 822.896024, 347.040810, 112.875000, X, Y) && !ellipse(28576.021332, 32529.351990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20168.043979, 31324.723737, 472.906048, 329.404672, 124.543126, X, Y) && !ellipse(24866.885365, 29952.851134, 695.495853, 424.152877, 90.000000, X, Y) && !ellipse(17399.214859, 29348.356079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37593.528320, 29365.735901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25602.507996, 29032.702301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32669.710340, 28816.901600, 369.251211, 369.251211, 0.000000, X, Y) && !ellipse(17818.554169, 28760.689240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40925.847626, 28732.824707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23649.683502, 28259.427673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33728.089752, 28057.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17123.528564, 28063.542267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11656.432953, 26406.310150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21701.064230, 25937.075800, 464.332013, 338.506410, 106.465810, X, Y) && !ellipse(29498.969600, 25459.078800, 300.240809, 300.240809, 0.000000, X, Y) && !ellipse(30359.770905, 25067.506317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27131.329620, 23989.763550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38917.862244, 23367.939758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.560000, 23460.300000, 450.967213, 450.967213, 0.000000, X, Y) && !ellipse(23164.837982, 23458.439087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26843.678436, 22420.094299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40423.412537, 22218.345261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.735168, 21978.662491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12935.750854, 20519.145096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19900.055794, 20543.091294, 467.931697, 309.974544, 61.032333, X, Y) && !ellipse(29179.220093, 20458.481659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18283.744507, 20093.188126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32970.429000, 19180.670800, 535.996015, 394.780811, 76.034000, X, Y) && !ellipse(29345.139960, 18192.590800, 605.943217, 290.979208, 322.471442, X, Y) && !ellipse(26121.279680, 14098.911600, 654.243219, 311.227209, 350.831147, X, Y) && !ellipse(30694.245000, 16825.331400, 929.264027, 929.264027, 0.000000, X, Y) && !ellipse(25951.217880, 15944.113000, 434.495213, 434.495213, 0.000000, X, Y) && !ellipse(18173.713455, 15303.447571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13637.663605, 15091.128860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25537.781036, 28001.743805, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Jul 11 19:50:41 2012] Writing fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src26.gif
[Wed Jul 11 20:36:46 2012] Mean detx,y = (96.46, 6737.88) 
[Wed Jul 11 20:36:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 20:43:02 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 20:43:02 2012] Setting source spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jul 11 20:43:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jul 12 04:36:00 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:00 2012] Error reading totcts from fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jul 12 04:36:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:02 2012] Using photon index=1.80, rate=0.0519, arf fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src26.arf
[Thu Jul 12 04:36:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:02 2012] Updating source flux to 1.4e-13
[Thu Jul 12 04:38:54 2012] Flag c found in src. 26 procflags, skipping spectral fitting