[Wed Jul 11 05:28:15 2012] Detection parameters:
  Position = (320.3, 334.9) = 12 42 4.66 33 18 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1242.4 +/- 53.2
  Background counts = 256.9
  Rate = 0.02 +/- 0.0008

[Wed Jul 11 05:28:16 2012] Off-axis axis estimate = 3.08'
[Wed Jul 11 05:32:37 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 05:32:37 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Wed Jul 11 05:32:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.920
[Wed Jul 11 05:32:37 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.97"
[Wed Jul 11 08:57:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jul 11 08:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src16.csv
[Wed Jul 11 08:57:53 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jul 11 08:57:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src16.csv
[Wed Jul 11 08:57:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 08:57:55 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jul 11 08:57:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Jul 11 08:57:55 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jul 11 08:57:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed Jul 11 08:57:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:29:03 2012] Source 17 is offset by 5.387325 and 5.970508 pixels which is larger than
2 X fitted extent = 3.286658 x 3.286658, not incorporating fit results
[Wed Jul 11 12:29:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:03 2012] Assessing source extent using major
[Wed Jul 11 12:29:03 2012] Source does appear to be extended
[Wed Jul 11 12:29:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 12:29:35 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 12:29:35 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Wed Jul 11 12:29:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.920
[Wed Jul 11 12:29:35 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.97"
[Wed Jul 11 17:06:50 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src16.ximg exists
[Wed Jul 11 17:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src16.csv
[Wed Jul 11 17:06:50 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Jul 11 17:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src16.csv
[Wed Jul 11 17:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:06:52 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Jul 11 17:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Jul 11 17:06:52 2012] fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Jul 11 17:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Jul 11 17:06:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:50:12 2012] Source 17 is offset by 7.995923 and 0.180255 pixels which is larger than
2 X fitted extent = 0.915945 x 0.915945, not incorporating fit results
[Wed Jul 11 19:50:12 2012] Spatial fit model total counts = 4932.760000, observed total counts = 4244.000000
[Wed Jul 11 19:50:12 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 19:50:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:12 2012] Assessing source extent using major
[Wed Jul 11 19:50:12 2012] Source does appear to be extended
[Wed Jul 11 19:50:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 19:50:40 2012] Counts = 1242.355713, rescaling region sizes by 2.000000
[Wed Jul 11 19:50:40 2012] XMMSAS src. selection expression = ellipse(27819.643311, 29083.684174, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 11 19:50:40 2012] Writing source region out to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src17_src.reg
[Wed Jul 11 19:50:40 2012] Extracting stamp from image fullrun_pn_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (245, 260) - (395, 410)
[Wed Jul 11 19:50:40 2012] XMMSAS bgd. selection expression = annulus(27819.643311, 29083.684174, 4350.000000, 8700.000000, X, Y) && !ellipse(26312.877498, 27848.132400, 1586.299246, 1586.299246, 0.000000, X, Y) && !ellipse(37244.782257, 21780.957062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29794.940000, 20317.059200, 350.326410, 350.326410, 0.000000, X, Y) && !ellipse(26851.795640, 30076.952200, 427.743212, 427.743212, 0.000000, X, Y) && !ellipse(34920.938660, 30249.767731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.631927, 29634.565582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29800.334991, 29004.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26083.537200, 25732.811600, 405.674412, 405.674412, 0.000000, X, Y) && !ellipse(27339.915400, 25586.972000, 1153.952033, 1153.952033, 0.000000, X, Y) && !ellipse(27752.230400, 24822.737200, 1187.016034, 388.362411, 62.993300, X, Y) && !ellipse(28091.774000, 24086.538000, 1196.872034, 1196.872034, 0.000000, X, Y) && !ellipse(28517.046000, 23274.456000, 1163.352033, 1163.352033, 0.000000, X, Y) && !ellipse(19045.301000, 23433.318400, 408.055212, 408.055212, 0.000000, X, Y) && !ellipse(29171.608000, 21632.204000, 1841.264053, 1841.264053, 0.000000, X, Y) && !ellipse(29148.988000, 22181.878000, 1324.024038, 1324.024038, 0.000000, X, Y) && !ellipse(29602.477825, 20955.060111, 1431.552041, 409.708180, 69.768045, X, Y) && !ellipse(35877.874939, 19990.735855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30236.144775, 19610.912674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.454000, 19112.846000, 1449.824042, 1449.824042, 0.000000, X, Y) && !ellipse(30815.591200, 18426.291400, 2876.144083, 445.235213, 64.393200, X, Y) && !ellipse(15741.998672, 19566.329422, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(26317.985291, 37471.734161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20752.620407, 37512.040161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34350.292000, 37938.044000, 1953.024056, 1953.024056, 0.000000, X, Y) && !ellipse(33243.836340, 36786.006400, 356.764010, 356.764010, 0.000000, X, Y) && !ellipse(26851.569183, 36054.067993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32925.500666, 35564.855800, 831.200024, 831.200024, 0.000000, X, Y) && !ellipse(31382.474915, 35288.615082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.227203, 33373.592896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32660.167938, 33130.490448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.021332, 32529.351990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20168.043979, 31324.723737, 472.906048, 329.404672, 124.543126, X, Y) && !ellipse(24866.885365, 29952.851134, 695.495853, 424.152877, 90.000000, X, Y) && !ellipse(25602.507996, 29032.702301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32669.710340, 28816.901600, 369.251211, 369.251211, 0.000000, X, Y) && !ellipse(23649.683502, 28259.427673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33728.089752, 28057.069305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21701.064230, 25937.075800, 464.332013, 338.506410, 106.465810, X, Y) && !ellipse(29498.969600, 25459.078800, 300.240809, 300.240809, 0.000000, X, Y) && !ellipse(30359.770905, 25067.506317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27131.329620, 23989.763550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26588.560000, 23460.300000, 450.967213, 450.967213, 0.000000, X, Y) && !ellipse(23164.837982, 23458.439087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26843.678436, 22420.094299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.735168, 21978.662491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19900.055794, 20543.091294, 467.931697, 309.974544, 61.032333, X, Y) && !ellipse(29179.220093, 20458.481659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18283.744507, 20093.188126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25537.781036, 28001.743805, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed Jul 11 19:50:40 2012] Writing fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src17.gif
[Wed Jul 11 20:14:00 2012] Mean detx,y = (1532.11, -479.10) 
[Wed Jul 11 20:14:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 20:16:14 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 20:16:14 2012] Setting source spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jul 11 20:16:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jul 11 23:57:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 11 23:57:39 2012] rmf not generated due to insufficient counts
[Thu Jul 12 04:36:00 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:00 2012] Error reading totcts from fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Jul 12 04:36:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:01 2012] Using photon index=1.80, rate=0.0189, arf fullrun_pn_xmm0202180201_pi300-10000_pass1_cl_src17.arf
[Thu Jul 12 04:36:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:01 2012] Updating source flux to 4.3e-14
[Thu Jul 12 04:38:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting