[Wed Jul 11 05:28:57 2012] Detection parameters:
  Position = (404.4, 448.7) = 12 41 35.45 33 26 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.0 +/- 12.1
  Background counts = 30.5
  Rate = 0.0009 +/- 0.0002

[Wed Jul 11 05:28:57 2012] Off-axis axis estimate = 13.33'
[Wed Jul 11 09:42:43 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 09:42:43 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Wed Jul 11 09:42:43 2012] source mask rpix=3.0, npix_max = 49, mask sum = 43, frac = 0.873
[Wed Jul 11 09:42:43 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 13.09"
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src50.ximg exists
[Wed Jul 11 12:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src50.csv
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed Jul 11 12:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src50.csv
[Wed Jul 11 12:28:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:28:43 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed Jul 11 12:28:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed Jul 11 12:28:43 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed Jul 11 12:28:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src50.csv
[Wed Jul 11 12:28:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:29:18 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 17.500142 pixels away
[Wed Jul 11 12:29:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:18 2012] Assessing source extent using major
[Wed Jul 11 12:29:18 2012] Source does appear to be extended
[Wed Jul 11 12:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:37:38 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:37:38 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Wed Jul 11 17:37:38 2012] source mask rpix=3.0, npix_max = 49, mask sum = 43, frac = 0.873
[Wed Jul 11 17:37:38 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 13.09"
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src46.ximg exists
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src46_1.ximg exists
[Wed Jul 11 19:49:53 2012] Fit fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src46 appears to have run properly
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Wed Jul 11 19:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Wed Jul 11 19:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Wed Jul 11 19:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:50:24 2012] Spatial fit model total counts = 420.733000, observed total counts = 382.000000
[Wed Jul 11 19:50:24 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 19:50:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:24 2012] Assessing source extent using major
[Wed Jul 11 19:50:24 2012] Source does appear to be extended
[Wed Jul 11 19:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 19:50:24 2012] Deleting source due to low Poisson probability 1.0