[Wed Jul 11 05:28:56 2012] Detection parameters:
  Position = (465.8, 316.3) = 12 41 14.20 33 16 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.3 +/- 19.9
  Background counts = 29.4
  Rate = 0.003 +/- 0.0003

[Wed Jul 11 05:28:57 2012] Off-axis axis estimate = 12.20'
[Wed Jul 11 09:42:43 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 09:42:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 09:42:43 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Wed Jul 11 09:42:43 2012] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.875
[Wed Jul 11 09:42:43 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.53"
[Wed Jul 11 12:28:41 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jul 11 12:28:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src17.csv
[Wed Jul 11 12:28:41 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jul 11 12:28:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src17.csv
[Wed Jul 11 12:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jul 11 12:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jul 11 12:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jul 11 12:28:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:29:18 2012] Warning, spatial fit 17 centroid is now closest to src. 42
[Wed Jul 11 12:29:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:18 2012] Assessing source extent using major
[Wed Jul 11 12:29:18 2012] Source does appear to be extended
[Wed Jul 11 12:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:37:38 2012] Using EEF radius (= 12.53 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:37:38 2012] Initial guess for spatial extent in simple fitting = 12.53"
[Wed Jul 11 17:37:38 2012] source mask rpix=2.9, npix_max = 45, mask sum = 40, frac = 0.875
[Wed Jul 11 17:37:38 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.53"
[Wed Jul 11 19:49:52 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jul 11 19:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src17.csv
[Wed Jul 11 19:49:52 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jul 11 19:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src17.csv
[Wed Jul 11 19:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jul 11 19:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jul 11 19:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jul 11 19:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:50:24 2012] Source 2 is offset by 6.905139 and 6.364703 pixels which is larger than
2 X fitted extent = 6.607311 x 6.607311, not incorporating fit results
[Wed Jul 11 19:50:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:24 2012] Assessing source extent using major
[Wed Jul 11 19:50:24 2012] Source does appear to be extended
[Wed Jul 11 19:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 03:12:11 2012] XMMSAS src. selection expression = ellipse(40475.913086, 27465.895172, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 03:12:11 2012] Writing source region out to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul 12 03:12:11 2012] Extracting stamp from image fullrun_mos2_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (428, 279) - (503, 354)
[Thu Jul 12 03:12:11 2012] XMMSAS bgd. selection expression = annulus(40475.913086, 27465.895172, 1087.500000, 2175.000000, X, Y) && !ellipse(42696.945984, 29710.756958, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 03:12:11 2012] Writing fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src2.gif
[Thu Jul 12 03:20:59 2012] Mean detx,y = (-12650.89, -6323.17) 
[Thu Jul 12 03:21:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 03:21:19 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 03:21:19 2012] Setting source spectrum file to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 12 03:21:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul 12 04:21:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 04:21:43 2012] rmf not generated due to insufficient counts
[Thu Jul 12 04:36:04 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:04 2012] Error reading totcts from fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 12 04:36:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:05 2012] Using photon index=1.80, rate=0.00318, arf fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src2.arf
[Thu Jul 12 04:36:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:05 2012] Updating source flux to 9.4e-14
[Thu Jul 12 04:37:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting