[Wed Jul 11 05:28:57 2012] Detection parameters:
  Position = (314.2, 323.2) = 12 42 6.78 33 17 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.4 +/- 33.7
  Background counts = 41.4
  Rate = 0.005 +/- 0.0005

[Wed Jul 11 05:28:57 2012] Off-axis axis estimate = 2.13'
[Wed Jul 11 09:42:43 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 09:42:43 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Wed Jul 11 09:42:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.759
[Wed Jul 11 09:42:43 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.49"
[Wed Jul 11 12:28:41 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jul 11 12:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src8.csv
[Wed Jul 11 12:28:41 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jul 11 12:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src8.csv
[Wed Jul 11 12:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jul 11 12:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jul 11 12:28:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jul 11 12:28:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:29:18 2012] Source 16 is offset by 7.105931 and 3.188097 pixels which is larger than
2 X fitted extent = 2.155494 x 2.155494, not incorporating fit results
[Wed Jul 11 12:29:18 2012] Source 16 is offset by -6.555264 and -1.815581 pixels which is larger than
2 X fitted extent = 0.869260 x 0.869260, not incorporating fit results
[Wed Jul 11 12:29:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:18 2012] Assessing source extent using major
[Wed Jul 11 12:29:18 2012] Source does appear to be extended
[Wed Jul 11 12:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 12:29:18 2012] Source is confused with source 17
[Wed Jul 11 12:29:18 2012] Source is confused with source 14
[Wed Jul 11 17:37:38 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:37:38 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Wed Jul 11 17:37:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.759
[Wed Jul 11 17:37:38 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.49"
[Wed Jul 11 19:49:52 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src8.ximg exists
[Wed Jul 11 19:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src8.csv
[Wed Jul 11 19:49:52 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Jul 11 19:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src8.csv
[Wed Jul 11 19:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Jul 11 19:49:53 2012] Fit fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Jul 11 19:50:24 2012] Source 16 is offset by 7.105931 and 3.191109 pixels which is larger than
2 X fitted extent = 2.017329 x 2.017329, not incorporating fit results
[Wed Jul 11 19:50:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:24 2012] Assessing source extent using major
[Wed Jul 11 19:50:24 2012] Source does appear to be extended
[Wed Jul 11 19:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 03:12:10 2012] XMMSAS src. selection expression = ellipse(27288.202026, 28072.622467, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 03:12:10 2012] Writing source region out to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src16_src.reg
[Thu Jul 12 03:12:10 2012] Extracting stamp from image fullrun_mos2_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (277, 286) - (352, 361)
[Thu Jul 12 03:12:10 2012] XMMSAS bgd. selection expression = annulus(27288.202026, 28072.622467, 1087.500000, 2175.000000, X, Y) && !ellipse(26316.170880, 27839.245400, 1281.794437, 1281.794437, 0.000000, X, Y) && !ellipse(26863.608800, 30075.215400, 380.468811, 380.468811, 0.000000, X, Y) && !ellipse(26096.162800, 25741.552600, 382.648011, 382.648011, 0.000000, X, Y) && !ellipse(27812.121000, 29099.467800, 368.887211, 368.887211, 0.000000, X, Y) && !ellipse(26503.001007, 29646.377808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.824890, 27643.275024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27339.724000, 28660.731800, 1227.112035, 1227.112035, 0.000000, X, Y) && !ellipse(27404.821533, 27123.961914, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 03:12:10 2012] Writing fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src16.gif
[Thu Jul 12 03:15:59 2012] Mean detx,y = (-734.16, -242.62) 
[Thu Jul 12 03:16:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 03:16:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 03:16:08 2012] Setting source spectrum file to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jul 12 03:16:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Jul 12 03:46:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 03:46:33 2012] rmf not generated due to insufficient counts
[Thu Jul 12 04:36:04 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:04 2012] Error reading totcts from fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Jul 12 04:36:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:05 2012] Using photon index=1.80, rate=0.00502, arf fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src16.arf
[Thu Jul 12 04:36:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:05 2012] Updating source flux to 4.8e-14
[Thu Jul 12 04:37:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting