[Wed Jul 11 05:28:56 2012] Detection parameters:
  Position = (303.2, 320.7) = 12 42 10.60 33 17 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115611.7 +/- 397.4
  Background counts = 41.5
  Rate = 2 +/- 0.005

[Wed Jul 11 05:28:57 2012] Off-axis axis estimate = 1.65'
[Wed Jul 11 09:42:43 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 09:42:43 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Jul 11 09:42:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Wed Jul 11 09:42:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Jul 11 12:28:41 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 12:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 12:28:41 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 12:28:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 12:28:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 12:28:42 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 12:28:42 2012] Fit fullrun_mos2_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 12:29:18 2012] Spatial fit model total counts = 102484.000000, observed total counts = 103804.000000
[Wed Jul 11 12:29:18 2012] Offset between fit and detection position for source 1 = 0.166815 pixels
[Wed Jul 11 12:29:18 2012] 97688.500000 total counts/ 10077.300000 bgd. counts: snr = 872.745333
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.166815 pixels
  Position = (303.0, 320.7) = 12 42 10.66 33 17 1.8
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 87611.2 +/- 312.6
  Background counts = 10077.3
  Rate = 1 +/- 0.004
[Wed Jul 11 12:29:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:18 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 12:29:18 2012] Source does appear to be extended
[Wed Jul 11 12:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:37:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:37:38 2012] Initial guess for spatial extent in simple fitting = 5.96"
[Wed Jul 11 17:37:38 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.143
[Wed Jul 11 17:37:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.96"
[Wed Jul 11 19:49:52 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 19:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 19:49:52 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 19:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 19:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 19:49:53 2012] fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 19:49:53 2012] Fit fullrun_mos2_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 11 19:50:24 2012] Spatial fit model total counts = 106543.000000, observed total counts = 103804.000000
[Wed Jul 11 19:50:24 2012] Offset between fit and detection position for source 1 = 0.188353 pixels
[Wed Jul 11 19:50:24 2012] 106729.200000 total counts/ 25600.000000 bgd. counts: snr = 507.057500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.188353 pixels
  Position = (303.0, 320.5) = 12 42 10.66 33 17 1.0
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 81129.2 +/- 326.7
  Background counts = 25600.0
  Rate = 1 +/- 0.004
[Wed Jul 11 19:50:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:24 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 19:50:24 2012] Source does appear to be extended
[Wed Jul 11 19:50:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 03:12:10 2012] Counts = 81129.200000, rescaling region sizes by 3.000000
[Thu Jul 12 03:12:10 2012] XMMSAS src. selection expression = ellipse(26316.170880, 27839.245400, 961.345828, 961.345828, 0.000000, X, Y)
[Thu Jul 12 03:12:10 2012] Writing source region out to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 12 03:12:10 2012] Extracting stamp from image fullrun_mos2_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (248, 265) - (358, 376)
[Thu Jul 12 03:12:10 2012] XMMSAS bgd. selection expression = annulus(26316.170880, 27839.245400, 4806.729138, 9613.458277, X, Y) && !ellipse(26863.608800, 30075.215400, 380.468811, 380.468811, 0.000000, X, Y) && !ellipse(34944.289642, 30234.729645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26096.162800, 25741.552600, 382.648011, 382.648011, 0.000000, X, Y) && !ellipse(29650.830000, 20301.741800, 1456.168042, 1456.168042, 0.000000, X, Y) && !ellipse(17190.326840, 28347.390600, 532.844015, 532.844015, 0.000000, X, Y) && !ellipse(27288.202026, 28072.622467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27812.121000, 29099.467800, 368.887211, 368.887211, 0.000000, X, Y) && !ellipse(26503.001007, 29646.377808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27343.824890, 27643.275024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27339.724000, 28660.731800, 1227.112035, 1227.112035, 0.000000, X, Y) && !ellipse(19018.957384, 23440.388228, 521.759261, 386.030089, 78.233199, X, Y) && !ellipse(33232.420344, 36774.608637, 563.279911, 301.075668, 26.190100, X, Y) && !ellipse(35892.796204, 19984.199173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27404.821533, 27123.961914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19928.432938, 20482.080887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31643.920800, 18159.863000, 644.028819, 644.028819, 0.000000, X, Y) && !ellipse(28599.590000, 20865.210000, 1456.968042, 1456.968042, 0.000000, X, Y) && !ellipse(33702.617401, 28146.668579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16082.579193, 35690.743164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19561.183975, 35844.514496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17805.180000, 27167.340000, 1605.368046, 1605.368046, 0.000000, X, Y)
[Thu Jul 12 03:12:10 2012] Writing fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1.gif
[Thu Jul 12 03:12:22 2012] Mean detx,y = (21.96, -59.16) 
[Thu Jul 12 03:12:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 03:14:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 03:14:05 2012] Setting source spectrum file to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 03:14:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 12 04:36:04 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:04 2012] Error reading totcts from fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 04:36:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:04 2012] Using photon index=1.80, rate=1.03, arf fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 04:36:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:04 2012] Updating source flux to 1e-11
[Thu Jul 12 04:38:54 2012] Reading fit data from xmm0202180201/analysis//spectral/fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 12 04:38:54 2012] Spectral fit parameter nH value = 1.44437e+14
[Thu Jul 12 04:38:54 2012] Spectral fit parameter PhoIndex value = 2.18676
[Thu Jul 12 04:38:54 2012] Failed to get F(0.3-8.0) from xmm0202180201/analysis//spectral/fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 12 04:38:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:38:54 2012] Using Nh = 1.4e+14, photon index=2.19, rate=1.03, arf fullrun_mos2_xmm0202180201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 04:38:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:38:54 2012] Updating source flux to 8.9e-12