[Wed Jul 11 05:28:35 2012] Detection parameters:
  Position = (309.6, 347.5) = 12 42 8.39 33 18 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1931.5 +/- 57.5
  Background counts = 42.4
  Rate = 0.03 +/- 0.0009

[Wed Jul 11 05:28:35 2012] Off-axis axis estimate = 3.65'
[Wed Jul 11 08:57:56 2012] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 08:57:56 2012] Initial guess for spatial extent in simple fitting = 8.25"
[Wed Jul 11 08:57:56 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.783
[Wed Jul 11 08:57:56 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.25"
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src2.csv
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src2.csv
[Wed Jul 11 09:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 11 09:42:43 2012] Fit fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jul 11 12:29:10 2012] Spatial fit model total counts = 2405.140000, observed total counts = 2581.000000
[Wed Jul 11 12:29:10 2012] Offset between fit and detection position for source 9 = 0.984664 pixels
[Wed Jul 11 12:29:10 2012] 2323.240000 total counts/ 1375.530000 bgd. counts: snr = 25.552914
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.984664 pixels
  Position = (309.2, 346.6) = 12 42 8.51 33 18 54.4
  Extent = 5.3 (4.8-5.7)", rotation angle = 0
  Source counts = 947.7 +/- 48.2
  Background counts = 1375.5
  Rate = 0.01 +/- 0.0006
[Wed Jul 11 12:29:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:10 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 12:29:10 2012] Source does appear to be extended
[Wed Jul 11 12:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:06:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:06:53 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Wed Jul 11 17:06:53 2012] source mask rpix=1.2, npix_max = 11, mask sum = 5, frac = 0.427
[Wed Jul 11 17:06:53 2012] Skipping simple spatial due to low active detector fraction
[Wed Jul 11 19:50:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:17 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 19:50:17 2012] Source does appear to be extended
[Wed Jul 11 19:50:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 02:38:07 2012] XMMSAS src. selection expression = ellipse(26855.159800, 30107.613000, 315.880209, 315.880209, 0.000000, X, Y)
[Thu Jul 12 02:38:07 2012] Writing source region out to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src9_src.reg
[Thu Jul 12 02:38:07 2012] Extracting stamp from image fullrun_mos1_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (291, 328) - (327, 365)
[Thu Jul 12 02:38:07 2012] XMMSAS bgd. selection expression = annulus(26855.159800, 30107.613000, 526.467015, 1052.934030, X, Y) && !ellipse(26317.070420, 27841.881200, 1245.528036, 1245.528036, 0.000000, X, Y) && !ellipse(27809.876120, 29092.956800, 342.381320, 342.381320, 0.000000, X, Y) && !ellipse(26510.384644, 29553.239380, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 02:38:07 2012] Writing fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src9.gif
[Thu Jul 12 02:39:53 2012] Mean detx,y = (1964.71, 1268.51) 
[Thu Jul 12 02:39:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 02:40:03 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 02:40:03 2012] Setting source spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 12 02:40:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jul 12 04:36:03 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:03 2012] Error reading totcts from fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jul 12 04:36:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:03 2012] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src9.arf
[Thu Jul 12 04:36:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:03 2012] Updating source flux to 1.6e-13