[Wed Jul 11 05:28:34 2012] Detection parameters:
  Position = (300.5, 296.2) = 12 42 11.56 33 15 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 456.0 +/- 29.8
  Background counts = 45.1
  Rate = 0.006 +/- 0.0004

[Wed Jul 11 05:28:35 2012] Off-axis axis estimate = 0.22'
[Wed Jul 11 08:57:56 2012] Using EEF radius (= 6.54 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 08:57:56 2012] Initial guess for spatial extent in simple fitting = 6.54"
[Wed Jul 11 08:57:56 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.997
[Wed Jul 11 08:57:56 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 6.54"
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src5.csv
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src5.csv
[Wed Jul 11 09:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jul 11 09:42:43 2012] Fit fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jul 11 12:29:10 2012] Spatial fit model total counts = 1396.000000, observed total counts = 1396.000000
[Wed Jul 11 12:29:10 2012] Offset between fit and detection position for source 7 = 0.135615 pixels
[Wed Jul 11 12:29:10 2012] 1441.947000 total counts/ 1138.060000 bgd. counts: snr = 9.008024
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.135615 pixels
  Position = (300.3, 296.2) = 12 42 11.60 33 15 15.3
  Extent = 5.0 (4.4-5.8)", rotation angle = 0
  Source counts = 303.9 +/- 38.0
  Background counts = 1138.1
  Rate = 0.004 +/- 0.0005
[Wed Jul 11 12:29:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:10 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 12:29:10 2012] Source does appear to be extended
[Wed Jul 11 12:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:06:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:06:53 2012] Initial guess for spatial extent in simple fitting = 4.98"
[Wed Jul 11 17:06:53 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.832
[Wed Jul 11 17:06:53 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.98"
[Wed Jul 11 17:37:37 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 11 17:37:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src4.csv
[Wed Jul 11 17:37:37 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 11 17:37:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src4.csv
[Wed Jul 11 17:37:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:37:38 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 11 17:37:38 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 11 17:37:38 2012] Fit fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul 11 19:50:17 2012] Spatial fit model total counts = 1393.380000, observed total counts = 1396.000000
[Wed Jul 11 19:50:17 2012] Offset between fit and detection position for source 7 = 0.007349 pixels
[Wed Jul 11 19:50:17 2012] 1439.334000 total counts/ 1137.900000 bgd. counts: snr = 8.935939
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.007349 pixels
  Position = (300.3, 296.2) = 12 42 11.61 33 15 15.2
  Extent = 5.0 (4.4-5.8)", rotation angle = 0
  Source counts = 301.4 +/- 37.9
  Background counts = 1137.9
  Rate = 0.004 +/- 0.0005
[Wed Jul 11 19:50:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:17 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 19:50:17 2012] Source does appear to be extended
[Wed Jul 11 19:50:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 02:38:07 2012] XMMSAS src. selection expression = ellipse(26079.661200, 25724.185000, 298.469409, 298.469409, 0.000000, X, Y)
[Thu Jul 12 02:38:07 2012] Writing source region out to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src7_src.reg
[Thu Jul 12 02:38:07 2012] Extracting stamp from image fullrun_mos1_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (283, 279) - (317, 313)
[Thu Jul 12 02:38:07 2012] XMMSAS bgd. selection expression = annulus(26079.661200, 25724.185000, 497.449014, 994.898029, X, Y) && !ellipse(26317.070420, 27841.881200, 1245.528036, 1245.528036, 0.000000, X, Y)
[Thu Jul 12 02:38:07 2012] Writing fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src7.gif
[Thu Jul 12 02:40:58 2012] Mean detx,y = (-1646.96, -1306.68) 
[Thu Jul 12 02:40:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 02:41:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 02:41:08 2012] Setting source spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul 12 02:41:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jul 12 04:36:03 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:03 2012] Error reading totcts from fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul 12 04:36:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:03 2012] Using photon index=1.80, rate=0.00383, arf fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src7.arf
[Thu Jul 12 04:36:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:03 2012] Updating source flux to 4.7e-14