[Wed Jul 11 05:28:34 2012] Detection parameters:
  Position = (305.3, 340.2) = 12 42 9.89 33 18 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 405.1 +/- 30.6
  Background counts = 42.5
  Rate = 0.006 +/- 0.0004

[Wed Jul 11 05:28:35 2012] Off-axis axis estimate = 3.07'
[Wed Jul 11 08:57:56 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 08:57:56 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Wed Jul 11 08:57:56 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.012
[Wed Jul 11 08:57:56 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.96"
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src7.csv
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src7.csv
[Wed Jul 11 09:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jul 11 09:42:43 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jul 11 09:42:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jul 11 09:42:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202180201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:29:10 2012] Spatial fit model total counts = 3026.090000, observed total counts = 3370.000000
[Wed Jul 11 12:29:10 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 12:29:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 12:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 12:29:10 2012] Assessing source extent using major
[Wed Jul 11 12:29:10 2012] Source does appear to be extended
[Wed Jul 11 12:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:06:53 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:06:53 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Wed Jul 11 17:06:53 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.012
[Wed Jul 11 17:06:53 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.96"
[Wed Jul 11 17:37:37 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jul 11 17:37:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src6.csv
[Wed Jul 11 17:37:37 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jul 11 17:37:37 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src6.csv
[Wed Jul 11 17:37:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 17:37:38 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jul 11 17:37:38 2012] fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jul 11 17:37:38 2012] Fit fullrun_mos1_xmm0202180201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Jul 11 19:50:17 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.047017 pixels away
[Wed Jul 11 19:50:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 19:50:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 19:50:17 2012] Assessing source extent using major
[Wed Jul 11 19:50:17 2012] Source does appear to be extended
[Wed Jul 11 19:50:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 02:38:07 2012] XMMSAS src. selection expression = ellipse(26510.384644, 29553.239380, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 02:38:07 2012] Writing source region out to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src3_src.reg
[Thu Jul 12 02:38:07 2012] Extracting stamp from image fullrun_mos1_xmm0202180201_pi300-10000_cl_sm2.00.img.gz, (268, 303) - (343, 378)
[Thu Jul 12 02:38:07 2012] XMMSAS bgd. selection expression = annulus(26510.384644, 29553.239380, 1087.500000, 2175.000000, X, Y) && !ellipse(26317.070420, 27841.881200, 1245.528036, 1245.528036, 0.000000, X, Y) && !ellipse(26855.159800, 30107.613000, 421.173612, 421.173612, 0.000000, X, Y) && !ellipse(27809.876120, 29092.956800, 342.381320, 342.381320, 0.000000, X, Y)
[Thu Jul 12 02:38:07 2012] Writing fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src3.gif
[Thu Jul 12 02:41:29 2012] Mean detx,y = (1665.10, 838.07) 
[Thu Jul 12 02:41:30 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 02:41:43 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 02:41:43 2012] Setting source spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 02:41:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jul 12 03:07:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 03:07:53 2012] rmf not generated due to insufficient counts
[Thu Jul 12 04:36:03 2012] Updating aperture counts using extracted products
[Thu Jul 12 04:36:03 2012] Error reading totcts from fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 04:36:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 04:36:03 2012] Using photon index=1.80, rate=0.00569, arf fullrun_mos1_xmm0202180201_pi300-10000_pass1_cl_src3.arf
[Thu Jul 12 04:36:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 04:36:03 2012] Updating source flux to 5.7e-14
[Thu Jul 12 04:36:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting